8881 | 극초음속 유동계산을 위한 유속분할기법 수정과 열전달 해석에의 응용 = Modification of flux-splitting scheme and its application to hypersonic flow and heat transfer over blunt bodylink 이창호; Lee, Chang-Ho; et al, 한국과학기술원, 2001 |
8882 | 근사 과도 상태 모델을 이용한 유도 전동기의 고속 고효율 제어 알고리즘에 관한 연구 = A study on high-speed high-efficiency control algorithm for induction motors using approximated transient-time modellink 장재호; Chang, Jae-Ho; et al, 한국과학기술원, 1998 |
8883 | 근접장 광자기 기록장치의 픽업 헤드 해석과 광학적 오차 보상에 관한 연구 = A study on pickup head and optical error compensation in magneto-optic near-field recording systemlink 오형렬; Oh, Hyeong-Ryeol; et al, 한국과학기술원, 2002 |
8884 | 근접한 세 원형구조물의 공기역학적 거동에 관한 연구 = On the aerodynamic response of three circular cylinders in close proximitylink 김윤석; Kim, Yun-Seok; et al, 한국과학기술원, 1992 |
8885 | 금속 나노구조 중재한 고분자 발광소자 = Metal nanostructure mediated polymer light emitting deviceslink 조관현; Cho, Kawn-Hyun; et al, 한국과학기술원, 2011 |
8886 | 금속 박판의 레이저 브레이징 공정 자동화 및 쾌속 시작 금형에의 응용에 관한 연구 = A study on the automation of laser brazing process and its application to rapid laminate toolinglink 윤석환; Yoon, Suk-Hwan; et al, 한국과학기술원, 2004 |
8887 | 금속 액상에 의한 세라믹스 Wetting 의 속도론 및 계면 반응에 관한 연구 = A study on the interfacial reaction and kinetics of reaction induced wetting in metal melt and ceramics systemlink 김성태; Kim, Sung-Tae; et al, 한국과학기술원, 1991 |
8888 | 금속 유기 화학 증착법에 의해 증착된 구리 박막의 증착 및 물성에 관한 연구 = A study on the deposition and the film characteristics of MOCVD copper thin filmslink 윤수식; Yoon, Soo-Sik; et al, 한국과학기술원, 1996 |
8889 | 금속/세라믹 브레이징 접합부의 잔류 응력 해석과 잔류응력 감소방법에 관한 연구 = A study on analysis of residual stress and its reduction method in metal/ceramic brazed jointslink 김원배; Kim, Weon-Bae; et al, 한국과학기술원, 1995 |
8890 | 금속간화합물을 이용한 연료전지시스템의 고효율 수소생성촉매박판재 개발 = Development of highly efficient foil catalysts of intermetallic compounds for hydrogen generators in the fuel cell systemlink 장준혁; Jang, Jun-Hyuk; et al, 한국과학기술원, 2011 |
8891 | 금속간화합물을 이용한 연료전지시스템의 차세대 수소제조장치용 촉매박판재 개발 = Development of new catalytic foils of intermetallic compounds for highly efficient hydrogen generators in the fuel cell systemlink 천동현; Chun, Dong-Hyun; et al, 한국과학기술원, 2007 |
8892 | 금속담지 촉매상의 에틸렌 수소화 반응에서의 다중성에 관한 연구 = A study on multiplicity in hydrogenation of supported catalystslink 한도흥; Han, Do-Hung; et al, 한국과학기술원, 1992 |
8893 | 금속산화물의 광열화학반응을 이용한 박막트랜지스터 가공 리페어 공정에 관한 연구 = A study on TFT manufacturing repair process using a photo-thermo-chemical reaction of metal oxideslink 이후승; Lee, Hu Seung; et al, 한국과학기술원, 2015 |
8894 | 금속유기화학기상증착법과 반응성 스퍼터링법으로 증착된 $CoN_x$ 박막을 이용하여 (100) Si 기판에서의 에피택셜 $CoSi_2$의 성장에 관한 연구 = Growth of epitaxial $CoSi_2$ layer on (100) Si substrate using $CoN_x$ film deposited by metallorganic chemical vapor deposition and reactive sputteringlink 김선일; Kim, Sun-Il; et al, 한국과학기술원, 2006 |
8895 | 금속유기화학기상증착법을 이용한 heavily doped Si 기판에서의 $CoSi_2$ layer의 성장거동 및 접합특성에 관한 연구 = Growth behavior of $CoSi_2$ layer on heavily doped Si and junction characteristics using metalorganic chemical vapor depositionlink 이희승; Lee, Heui-Seung; et al, 한국과학기술원, 2002 |
8896 | 금속유도성장법과 기상유도결정화법을 이용한 저온 다결정 Si 박막 제조에 관한 연구 = Low temperature fabrication of poly-Si film by metal-induced growth and vapor-induced crystallizationlink 안경민; Ahn, Kyung-Min; et al, 한국과학기술원, 2011 |
8897 | 금속흡착에 의한 LPCVD 비정질 실리콘 박막의 저온 결정화에 관한 연구 = A study on low temperature crystallization of LPCVD amorphous Si using metal adsorption methodlink 손동균; Sohn, Dong-Kyun; et al, 한국과학기술원, 1997 |
8898 | 금형가공용 통합 CAM 시스템을 위한 가공데이터의 모의가공과 검증에 관한 연구 = Cutting simulation and verification of NC data for unified CAM system for die and mold manufacturinglink 정연찬; Chung, Yun-Chan; et al, 한국과학기술원, 1996 |
8899 | 금형가공의 Concurrent engineering을 위한 CAPP / CAM 통합에 관한 연구 = A study on CAPP / CAM integration for concurrent engineering of die machininglink 유우식; Yoo, Woo-Sik; et al, 한국과학기술원, 1992 |
8900 | 금형의 5축 NC 가공을 위한 CAM 시스템 개발에 관한 연구 = A study on the development of a CAM system for 5-axis NC machining of die & moldlink 박정환; Park, Jung-W.; et al, 한국과학기술원, 1995 |
8901 | 기계 부품용 DLC 코팅의 마찰 및 마모 특성에 관한 연구 = A study on friction and wear characteristics of DLC coating used for machine elementslink 김동욱; Kim, Dong-Wook; et al, 한국과학기술원, 2012 |
8902 | 기계적 합금화된 ODS Ni기 초내열 합금 MA 754의 열간 변형 조건이 2차 재결정 거동 및 고온 기계적 성질에 미치는 영향 = The effects of hot deformation conditions on the secondary recrystallization behavior and mechanical properties at elevated temperature in mechanically alloyed oxide dispersion strengthened Ni-base superalloy MA 754link 이정훈; Lee, Jung-Hoon; et al, 한국과학기술원, 1999 |
8903 | 기계적 합금화된 ODS Ni기 초내열 합금의 열처리 조건이 미세조직 및 고온 기계적 성질에 미치는 영향 = The influence of heat treatment conditions on the microstrucutre and mechanical properties at elevated temperature in mechanically alloyed oxide dispersion strengthened Ni-base superalloyslink 박이주; Park, Lee-Ju; et al, 한국과학기술원, 1995 |
8904 | 기계적 합금화법으로 제조한 분산강화 Al-Ti합금의 크립성질에 미치는 Si 첨가의 효과 = Effect of si addition on the creep properties of dispersion hardened Al-Ti alloy fabricated by mechanical alloyinglink 최철진; Choi, Chul-Jin; et al, 한국과학기술원, 1997 |
8905 | 기계적으로 생성된 Vacancy에 의한 순금속의 cycliccreep 가속화 기구에 대한 연구 = (A) study on the cyclic creep acceleration mechanism controlled by the mechanically generated vacancies in pure metalslink 신동혁; Shin, Dong-Hyuk; et al, 한국과학기술원, 1982 |
8906 | 기계화학법에 의한 $K_{0.5}Na_{0.5}NbO_3$ 분말 합성 및 소결 거동 = Mechanochemical Synthesis of $K_{0.5}Na_{0.5}NbO_3$ Powders and its Sintering Behaviorlink 윤중열; Yun, Jung-Yeul; et al, 한국과학기술원, 2009 |
8907 | 기둥 배열을 가진 신축성 유기발광소자의 제작 및 안정성에 관한 연구 = Study on fabrication and stability of stretchable OLED with pillar arraylink 임명섭; 최경철; et al, 한국과학기술원, 2019 |
8908 | 기록매체용 CoCrTaPt/Cr 박막의 미세구조 및 자성특성에 미치는 응력 효과 = Effect of thin film stress on the microstructures and magnetic properties of the CoCrTaPt/Cr thin film recording medialink 김종환; Kim, Jong-Hwan; et al, 한국과학기술원, 2003 |
8909 | 기상유도결정화 및 RTA 공정에 의한 다결정 Si 박막의 제조 및 다결정 Si 박막 트랜지스터 특성에 관한 연구 = Fabrication of polycrystalline Si films by vapor-induced crystallization and rapid thermal annealing process and characterization of polycrystalline Si thin film transistorslink 양용호; Yang, Yong-Ho; et al, 한국과학기술원, 2011 |
8910 | 기상유도결정화법 및 Hot-wire CVD 방법을 이용한 대결정립 다결정 Si 박막 성장에 관한 연구 = Growth of large-grained poly-Si film using vapor-induced crystallization and hot-wire CVDlink 강승모; Kang, Seung-Mo; et al, 한국과학기술원, 2012 |
8911 | 기상유도결정화법에 의한 비정질 Si 박막의 저온결정화와 다결정 Si 박막트랜지스터에의 응용에 관한 연구 = Low temperature crystallization of amorphous Si thin films using vapor-induced crystallization and its application to polycrystalline Si thin film transistorslink 엄지혜; Eom, Ji-Hye; et al, 한국과학기술원, 2005 |
8912 | 기상측정을 위한 고진동 둔감 특성 광섬유 점회절 간섭계 = Large vibration-desensitized fiber-optic point-diffraction interferometer for on-machine measurementlink 권택민; Kwon, Taek-Min; et al, 한국과학기술원, 2011 |
8913 | 기상합성 다이아몬드의 핵생성 및 성장에 미치는 바이어스 인가 효과 = Effects of electrical bias on nucleation and growth of CVD diamondlink 송복한; Song, Bok-Han; et al, 한국과학기술원, 1999 |
8914 | 기술성숙도를 고려한 복잡 시스템 연구개발 프로젝트 관리 방법론 연구 = Project management methodology for research and development of complex systems considering the technology readiness levellink 최영인; 안재명; et al, 한국과학기술원, 2018 |
8915 | 기어감속형 짐발시스템의 백래시 추정방법 및 주파수응답특성에 미치는 백래시 영향에 관한 연구 = A study on the backlash estimation of gimbal system with gear reducers and the backlash influence to frequency response characteristicslink 백주현; Baek, Joo-Hyun; et al, 한국과학기술원, 2002 |
8916 | 기울어진 스트립과 슬롯이 있는 도체 구에 의한 전자파 산란 = Electromagnetic scattering from slant strips and slotted conducting spherelink 옥장수; Ock, Jang-Soo; et al, 한국과학기술원, 2010 |
8917 | 기저 구조물과 부가 구조물 사이에 불일치 절점이 있는 경우의 구조물 동특성 변경법 = Structural dynamics modification for the case of having non-matching nodes between base and modification structureslink 정의일; Jung, Eui-Il; et al, 한국과학기술원, 2005 |
8918 | 기체주입 노즐의 내부 유동특성 및 미립화 성능에 관한 연구 = Study of internal flow characteristics and atomization performance of effervescent atomizerslink 김주연; Kim, Joo-Youn; et al, 한국과학기술원, 2000 |
8919 | 기초분리된 액체저장탱크의 지진거동 분석을 위한 유사동적실험 = Pseudo-dynamic tests for seismic response prediction of base-isolated liquid storage tankslink 김남식; Kim, Nam-Sik; et al, 한국과학기술원, 1994 |
8920 | 기판접착을 이용한 몸체접지형SOI nMOSFET에 대한 연구 = Study on grounded body SOI n-channel MOSFET by wafer bondinglink 강원구; Kang, Won-Gu; et al, 한국과학기술원, 1996 |
8921 | 기하광학 반복에 의한 회절파 계산 = Succesive iteration of geometrical-optics for diffracted fieldslink 황철규; Hwang, Churl-Kew; et al, 한국과학기술원, 1988 |
8922 | 기하학적 비선형을 고려한 보강된 복합적층 평판의 진동및 플러터 특성 = Vibration and flutter characteristics of stiffened composite laminated plates considering geometric nonlinearitylink 이동민; Lee, Dong-Min; et al, 한국과학기술원, 1996 |
8923 | 나노 구조가 삽입된 유기 발광 소자 = Nanostructure embedded organic light-emitting diodeslink 김진영; Kim, Jin-Yeong; et al, 한국과학기술원, 2014 |
8924 | 나노 인공위성 적용을 위한 50 mN 급 마이크로 액체 추력기 개발 및 성능 개선 = Development of a 50 mN class liquid micro thruster and performance improvement for nanosatellites applicationslink 허정무; Huh, Jeongmoo; et al, 한국과학기술원, 2016 |
8925 | 나노 임프린트 공정용 광경화성 플르오르화 하이브리머의 제조 및 특성 = Synthesis and characterization of UV curable fluorinated hybrimers for nano imprintslink 김우수; Kim, Woo-Soo; et al, 한국과학기술원, 2006 |
8926 | 나노 입자의 기상 제조를 위한 반응 해석 = Reaction analysis for the gas phase growth of nanoparticleslink 이종호; Lee, Jong-Ho; et al, 한국과학기술원, 2003 |
8927 | 나노구조체 전극을 이용한 고성능 에너지저장소자 제작에 관한 연구 = (A) study on fabrication of high-performance energy storage devices using nanostructured electrodelink 이재학; 양민양; et al, 한국과학기술원, 2018 |
8928 | 나노구조체에 의해 생성된 전기장 증폭과 극자외선 특성 연구 = A study on characteristics of field enhancement and EUV light generated by nanostructureslink 이동협; Lee, Dong-Hyub; et al, 한국과학기술원, 2014 |
8929 | 나노구조체의 전기장 증폭에 의한 극자외선 생성 연구 = A study on EUV generation by plasmonic field enhancement using nanostructureslink 한승회; Han, Seunghwoi; et al, 한국과학기술원, 2016 |
8930 | 나노제조 공정용 열가소성 폴리머 필름의 점착 및 마찰 거동에 관한 연구 = A study on adhesion and friction behavior of thermoplastic polymer film for nanofabrication processlink 김광섭; Kim, Kwang-Seop; et al, 한국과학기술원, 2008 |
8931 | 나셀에 고정되는 보조날개를 이용한 틸트로터 성능 및 훨플러터 안정성 향상 연구 = A study on enhancement of tiltrotor performance and whirl flutter stability using nacelle-fixed auxiliary winglink 이명규; Lee, Myeong-Kyu; et al, 한국과학기술원, 2013 |
8932 | 난류 유동 해석을 위한 Hybrid RANS/LES와 Correlation 기반 천이모델의 혼합에 관한 연구 = A study of blending hybrid RANS/LES and correlation-based transition models for turbulent flowslink 유주열; You, Ju-Yeol; et al, 한국과학기술원, 2013 |
8933 | 난류수송에 관련된 시간척도의 비등방성에 관한 연구 = Study on the anisotropy of turbulent transport time-scalelink 조중원; Cho, Choog-Won; et al, 한국과학기술원, 2005 |
8934 | 난류확산 화염에서의 차등확산의 영향에 관한 연구 = A study on the differential diffusion effects in the turbulent diffusion flameslink 이병무; Lee, Byung-Moo; et al, 한국과학기술원, 1988 |
8935 | 난지도 매립지의 지하수 오염 방지를 위한 침출수 적정 관리 방안에 관한 연구 = Leachate control system development for ground water protection in Nan-Ji Do landfill sitelink 김용우; Kim, Yong-Woo; et al, 한국과학기술원, 1995 |
8936 | 난지도 매립지의 침출수에 의한 지하수 오염의 기여도 추정과 해석 = Prediction of leachate contribution to groundwater pollution around nanji landfill sitelink 윤석표; Yoon, Seok-Pyo; et al, 한국과학기술원, 1994 |
8937 | 날숨 분석용 반도체식 어레이 센서의 제작 및 특성 평가 시스템에 관한 연구 = The study on the arrayed semiconducting ceramic gas sensors and design of their characterization system for the analysis of exhaled breathlink 박광민; Park, Kwang-min; et al, 한국과학기술원, 2017 |
8938 | 낮은 상관 관계를 갖는 음장에서 음향 홀로그래피의 적용 = Application of acoustic holography to the sound field of low coherencelink 남경욱; Nam, Kyoung-Uk; et al, 한국과학기술원, 2004 |
8939 | 내부 순환 유동층 반응기에서의 비촉매 및 촉매 석탄 가스화 특성 연구 = Non-catalytic and catalytic coal gasification in an Internally circulating fluidized bed reactorlink 이종민; Lee, Jong-Min; et al, 한국과학기술원, 1998 |
8940 | 내생탈질 메커니즘을 이용한 저농도 하수의 생물학적 질소, 인 제거 특서 연구 = Characteristics of biological nutrient removal by endogenous nitrate respiration(ENR) mechanism from low strength wastewaterlink 박명균; Park, Myung-Gyun; et al, 한국과학기술원, 2001 |