2141 | 펄스 레디저 조사에 의한 비정질 실리콘 박막의 재결정화에 관한 연구 = A study on the recrystallization of amorphous silicon thin film by the pulsed-laser irradiationlink 맹성렬; Maeng, Sung-Lyul; et al, 한국과학기술원, 1995 |
2142 | 펄스 레이저 증착에 의한 $YBa_2Cu_3O{7-x}$ 고온 초전도 바각의 배향성에 관한 연구 = A study of the crystallographic orientation of $YBa_2Cu_3O{7-x}$ thin films by pulsed laser depositionlink 김홍승; Kim, Hong-Seung; et al, 한국과학기술원, 1993 |
2143 | 펄스레이저 증착법에 의한 $YBa_2Cu_3O_x$ 박막의 저온증착 특성과 초고주파특성에 관한 연구 = A study on the low temperature deposition and microwave characteristics of $YBa_2Cu_3O_x$ thin film deposited using pulsed laser ablation methodlink 이희철; Lee, Hui-Chul; et al, 한국과학기술원, 1997 |
2144 | 펄스와 직류 이온질화에 따른 Hole 시편에서의 질화거동에 관한 비교 연구 = A comparative study on the nitriding behavior of hole speciman between pulse and D.C. ion nitridinglink 이건환; Lee, Gun-Hwan; et al, 한국과학기술원, 1986 |
2145 | 펄스화학기상침투법에 의한 탄소/탄소 복합재료의 치밀화에 관한 연구 = Densification of carbon/carbon composite by pulse chemical vapour infiltrationlink 정혁제; Jeong, Hyeok-Je; et al, 한국과학기술원, 1995 |
2146 | 페로브스카이트 구조를 갖는 재료에서 Ruddlesden-Popper 결함의 형성과 조건 = Formation of ruddlesden-popper faults in perovskite-structure materialslink 홍영재; 정성윤; et al, 한국과학기술원, 2019 |
2147 | 페로브스카이트 태양 전지의 결정 형성 과정에서의 $Pb(SCN)_2$ 첨가물의 효과 연구 = Effects of $Pb(SCN)_2$ additive on crystal formation in Perovskite solar cellslink 김미경; 김상욱; et al, 한국과학기술원, 2016 |
2148 | 펩타이드 나노선의 제조 및 액정 거동 분석 = Synthesis and liquid crystalline behavior of peptide nanowireslink 박지선; Park, Ji-Sun; et al, 한국과학기술원, 2008 |
2149 | 평면 마그네트론 스퍼터링 시스템에서의 타겟 효율 향상을 위한 연구 = Enhancement of target utilization in a planar magnetron sputtering systemlink 서태원; Seo, Tae-Won; et al, 한국과학기술원, 2004 |
2150 | 평면형 금속/절연막/다결정실리콘/절연막/금속 안티퓨즈 구조의 금속도선 형성에 관한 연구 = A study on the metal line formation in planar metal/dielectric/poly-Si/dielectric/metal antifuse structurelink 정승훈; Chong, Sung-Hoon; et al, 한국과학기술원, 1995 |
2151 | 폐 아크릴섬유를 이용한 섬유상 활성탄의 제조 = Preparation of fibrous activated carbon from waste acrylic fiberslink 김광무; Kim, Kwang-Moo; et al, 한국과학기술원, 1995 |
2152 | 폴리(1,1'-나프틸 부타디엔)의 합성과 수소화 중합체 = Synthesis of poly(1,1'-naphthylbutadiene) and hydrogenated polymerslink 김현진; Kim, Hyun-Jin; et al, 한국과학기술원, 1996 |
2153 | 폴리(1-아릴-1,3-부타디엔) 및 수소화 고분자의 미세구조 = Microstructure of poly(1-aryl-1,3-butadiene) and hydrogenated polymerslink 최석경; Choi, Seok-Kyeong; et al, 한국과학기술원, 1998 |
2154 | 폴리(알릴릭 술폰)의 합성과 광학특성 = Synthesis and characterization of photosensitive poly(allylic sulfone)link 황찬승; Hwang, Chan-Seung; et al, 한국과학기술원, 1994 |
2155 | 폴리(파라-페닐렌비닐렌) 유도체의 합성 및 광미세가공 = Synthesis and photolithography of poly(p-phenylenevinylene) derivativeslink 양돈식; Yang, Don-Sik; et al, 한국과학기술원, 1997 |
2156 | 폴리옥테나머 블랜드의 물성 = Properties of elastomer blends of polyctenamerlink 홍종상; Hong, Jong-Sang; et al, 한국과학기술원, 1995 |
2157 | 폴리이미드 위에 스퍼터 증착한 Cr 및 Cu 박막의 잔류응력에 관한 연구 = A study on the residual stress of Cr & Cu thin films sputtered onto polyimidelink 김관수; Kim, Kwan-Soo; et al, 한국과학기술원, 1996 |
2158 | 폴리카보네이트-폴리(옥시테트라메틸렌) 글리콜 블록공중합체의 합성 및 물성 = Synthesis and characterization of Polycarbonate-Poly(Oxytetramethylene) Glycol block copolymerlink 천승한; Cheon, Seung-Han; et al, 한국과학기술원, 1994 |
2159 | 폴리카보네이트에 대한 내마모성 코팅에 관한 연구 = A study on the abrasion resistant coating for polycarbonate substratelink 조갑성; Cho, Kab-Sung; et al, 한국과학기술원, 1997 |
2160 | 표면 산화처리한 리드프레임과 EMC 계면 반응에 관한 연구 = A study on the reaction in the interface between oxidized leadframe and epoxy molding compoundslink 지승헌; Chi, Sung-Hon; et al, 한국과학기술원, 1996 |
2161 | 표면 산화층이 서브마이크론 크기 니켈의 소결거동에 미치는 영향 = Effect of passivation on the sintering behavior of submicron nickel powder compactslink 조기영; Jo, Gi-Young; et al, 한국과학기술원, 2013 |
2162 | 표면 조건의 측면에서 본 FeTi의 activation = The activation of FeTi in view of surface conditionlink 김해천; Kim, Hae-Cheon; et al, 한국과학기술원, 1984 |
2163 | 표면 플라즈몬 공명에 기반한 광전기화학적 물 분해 연구 = Photoelectrochemical water splitting based on surface plasmon resonancelink 최신영; Choi, Shinyoung; et al, 한국과학기술원, 2015 |
2164 | 표면장력 및 온도 경사도를 이용한 계면 자가조립 대면적 MoS2 박막 제조 = Interfacial self-assembly of large-area MoS2 thin film by surface tension & temperature Gradientlink 윤태영; Yun, Taeyeong; et al, 한국과학기술원, 2015 |
2165 | 표면침탄에 의한 텅스텐 중합금의 표면개질 = Surface modification of tungsten heavy alloys by surface carburizationlink 정석우; Jung, Suk-Woo; et al, 한국과학기술원, 1997 |
2166 | 프로판을 사용한 TiC 화학증착에 대한 연구 = Chemical vapor deposition of titanium carbide on WC-6Co sintered carbide using propanelink 백동수; Baik, Dong-Soo; et al, 한국과학기술원, 1983 |
2167 | 프로판을 사용한 TiC 화학증착에서 증착조건들이 미치는 영향 = The effects of deposition variables in the chemical vapor deposition of TiC using propanelink 김동갑; Kim, Dong-Gap; et al, 한국과학기술원, 1984 |
2168 | 플라즈마 에칭과 플라즈마 밀도 분포가 탄소나노튜브의 전계 방출 특성에 미치는 영향에 대한 연구 = Plasma etching and plasma density distribution effects on electric field emission properties of carbon nanotubeslink 강경태; Kang, Kyong-Tae; et al, 한국과학기술원, 2002 |
2169 | 플라즈마 표면처리에 의한 폴리카보네이트(polycarbonate)와 구리(Cu) 박막간의 접착력 강화에 대한 연구 = A study on the enhancing adhesion strength of polycarbonates and Cu films by plasma surface treatmentlink 조병훈; Cho, Byeong-Hoon; et al, 한국과학기술원, 2002 |
2170 | 플라즈마 화학 증착법으로 제조된 P-doped μc-Si:H 박막의 특성 = Properties of phosphorus-doped μc-Si:H thin films by PECVDlink 이정노; Lee, Jeong-No; et al, 한국과학기술원, 1993 |
2171 | 플라즈마 화학 증착법으로 제조한 P-doped α-Si:H 박막의 고상결정화 = Solid phase crystallization of P-doped α-Si:H films deposited by PECVDlink 이범주; Lee, Bum-Joo; et al, 한국과학기술원, 1995 |
2172 | 플라즈마 화학증착된 Aluminum oxide 박막의 $CF_4$와 $CC1_4$ 플라즈마에서의 Reactive ion etching 특성 = The $CF_4/CC1_4$ reactive ion etching properties of aluminum oxide films deposited by PECVDlink 김형석; Kim, Hyung-Suk; et al, 한국과학기술원, 1993 |
2173 | 플라즈마 화학증착된 TiN 박막의 분산분석에 의한 증착특성 및 기계적성질에 관한 연구 = A study on the deposition characteristics by analysis of variance and mechanical properties by plasma enhanced chemical vapor depositionlink 인치범; In, Chi-Bum; et al, 한국과학기술원, 1990 |
2174 | 플라즈마 화학증착법에 의하여 증착된 $TiO_2$ 박막의 반도체 및 전기화학적 성질에 대한 연구 = A study on the semiconductive and electrochemical properties of the $TiO_2$ films deposited by PECVD methodlink 양태현; Yang, Tae-Hyun; et al, 한국과학기술원, 1992 |
2175 | 플라즈마 화학증착법에 의하여 증착된 aluminum oxide 박막의 C-V 특성에 증착 변수가 미치는 영향 = The effect of deposition parameters on C-V characteristics of aluminum oxide thin films deposited by PECVDlink 김용천; Kim, Yong-Chun; et al, 한국과학기술원, 1990 |
2176 | 플라즈마 화학증착법에 의하여 증착된 Aluminum oxide 박막의 에칭 특성에 관한 연구 = A study on etching properties of aluminum oxide films deposited by plasma enhanced chemical vapor depositionlink 정진기; Jung, Jin-Ki; et al, 한국과학기술원, 1991 |
2177 | 플라즈마 화학증착법에 의한 Ti(C,N)의 증착기구 및 증착층의 특성에 관한 연구 = A study on the deposition mechanism and structural properties of Ti(C,N) deposited by plasma enhanced chemical vapor depositionlink 김상호; Kim, Sang-Ho; et al, 한국과학기술원, 1989 |
2178 | 플라즈마 화학증착법에 의해 형성된 $TiO_2$ 박막을 통한 수소투과 거동에 관한 연구 = Hydrogen permeation through the $TiO_2$ film produced by plasma enhanced chemical vapor deposition methodlink 박진우; Park, Jin-Woo; et al, 한국과학기술원, 1993 |
2179 | 플라즈마 화학증착법으로 제조한 비정질 실리콘박막의 결정화 거동에 미치는 수소의 영향 = Hydrogen effects on the behavior of crystallization of amorphous silicon films prepared by plasma enhanced chemical vapor depositionlink 김해열; Kim, Hae-Yeol; et al, 한국과학기술원, 1995 |
2180 | 플라즈마 화학증착법으로 제조한 수소함유-비정질 탄화규소의 광학적 특성에 관한 연구 = A study on the characteristics of the optical properties of hydrogenated amorphous silicon carbide prepared by PECVDlink 박장호; Park, Jang-Ho; et al, 한국과학기술원, 1990 |
2181 | 플라즈마 화학증착법으로 제조한 수소화된 비정질 실리콘 (a-Si:H) 박막의 결정화 거동에 관한 연구 = A study on the behavior of crystallization of hydrogenated amorphous silicon (a-Si:H) films prepared by plasma enhanced chemical vapor depositionlink 최재범; Choi, Jae-Beom; et al, 한국과학기술원, 1994 |
2182 | 플라즈마 화학증착법을 이용한 수소화된 비정질 및 미세결정질 실리콘 박막의 제조 = Deposition of a-Si:H and μc-Si:H thin films by PECVD methodlink 정병후; Jung, Byung-Hoo; et al, 한국과학기술원, 1992 |
2183 | 플라즈마침탄을 이용한 AISI 316L 스테인레스강의 표면경화에 대한 연구 = A study on the surface hardening of AISI 316L stainless steel using plasma carburizinglink 서봉석; Seo, Bong-Seok; et al, 한국과학기술원, 1996 |
2184 | 플렉서블 디스플레이 구현을 위한 레이저 박리 기술 개발 = Laser lift-off technelogy for realization of flexible displaylink 이환건; Lee, Hwan-Keon; et al, 한국과학기술원, 2014 |
2185 | 플렉서블 박막소자 적용을 위한 운모기판 위의 버퍼층 형성 연구 = Formation of the buffer layer on mica for application to flexible thin film transistorlink 오준석; Oh, Joon-Seok; et al, 한국과학기술원, 2007 |
2186 | 피로 Process 영역을 고려한 수명예측 및 균열선단 변형의 온도 의존성 = Life prediction in terms of fatigue process zone and temperature dependence of crack-tip deformationlink 정창렬; Jeong, Chang-Yeol; et al, 한국과학기술원, 1995 |
2187 | 필라멘트법에 의한 다이아몬드 기상 증착시 기체 압력과 기판 재료의 영향 = The effects of total gas pressure and substrate materials on diamond deposition by hot-filament-activated chemical vapour depositionlink 허종무; Huh, Jong-Moo; et al, 한국과학기술원, 1995 |
2188 | 하소 및 소결조건이 Mn-Zn-Fe ferrites 의 투자율 및 손실에 미치는 영향 = Effects of calcination and sintering conditions on the permeability and loss of Mn-Zn-Fe ferriteslink 백문철; Paek, Mun-Cheol; 임호빈; 변수일; et al, 한국과학기술원, 1982 |
2189 | 하이브리드재료 제작을 위한 알콕시 실란의 축합 반응을 이용한 에폭시 올리고 실록산 수지 제조 = Synthesis of epoxy oligosiloxane resins using condensation of epoxy alkoxysilaneslink 정종필; Jeong, Jong-Pil; et al, 한국과학기술원, 2007 |
2190 | 합금 600의 예민화와 입계응력 부식균열 민감도 사이의 관계에 관한 연구 = A study on the relation between sensitization and IGSCC susceptibility of alloy 600link 안명규; Ahn, Myung-Kyu; et al, 한국과학기술원, 1993 |
2191 | 합금원소(Cr, Mo, W, Ni)가 페라이트 스테인리스강의 재부동태 거동에 미치는 영향 = Effects of alloying elements(Cr, Mo, W, Ni) on repassivation kinetics of ferritic stainless steelslink 조은애; Cho, Eun-Ae; et al, 한국과학기술원, 1998 |
2192 | 형광분자를 이용한 동시 다중 형광 신호 증폭 기술 및 파장 선택성 하이드로젤 액츄에이터 개발 = Development of simultaneous amplification of multiple immunofluorescence signals and wavelength-selective hydrogel actuator using fluorescent moleculeslink 연해민; 장재범; et al, 한국과학기술원, 2022 |
2193 | 형광체 페이스트용 저온소성형 바인더 P(MMA-co-BMA)의 합성과 열분해시 잔류 탄소침적물 형성 기구 및 제어에 관한 연구 = Synthesis of low temperature burnable P(MMA-co-BMA) binder and control of carbon residue formation during binder thermolysislink 김성욱; Kim, Soung-Wook; et al, 한국과학기술원, 2007 |
2194 | 혼합과 동입도가 Fe-8Cu 소결체의 인장강도에 미치는 영향 = The effect of mixing and Cu particle size on the tensile strength of Fe-8Cu sintered compactslink 송휴섭; Song, Hue-Sup; et al, 한국과학기술원, 1977 |
2195 | 혼합기체의 분위기가 반응결합질화규소의 미세구조에 미치는 영향 = Effect of the mixed gas atmospheres on the microstructure of reaction bonded $Si_3N_4$link 박지연; Park, Ji-Yeon; et al, 한국과학기술원, 1984 |
2196 | 혼합전위식 자동차용 $NH_3$ 센서 = Mixed potential type $NH_3$ sensors for the automotive exhaustlink 손병국; Son, Byoung-Kuk; et al, 한국과학기술원, 2009 |
2197 | 화학 증착법에 의한 $TiO_2$ 박막 제조시 기상에서의 반응이 증착 특성에 미치는 영향 = Effects of gas phase reaction on deposition characteristics during $TiO_2$ Thin film preparation by CVDlink 조정호; Cho, Jeong-Ho; et al, 한국과학기술원, 1992 |
2198 | 화학 증착법으로 만든 탄소/탄소 복합재료의 미세 구조 및 기계적 성질에 관한 연구 = A study on the microstructures and mechanical properties of the chemically vapor-deposited carbon/carbon compositeslink 송근용; Sohn, Keun-Yong; et al, 한국과학기술원, 1987 |
2199 | 화학 증착법으로 제조한 SiC 가 함유된 탄소/탄소 복합재료의 산화거동에 관한 연구 = A study on the oxidation behavior of carbon/carbon composites co-deposited with SiClink 김윤기; Kim, Yoon-Kee; et al, 한국과학기술원, 1992 |
2200 | 화학기상증착을 통한 이차원 유무기 할로겐화 페로브스카이트 성장 전략 = Strategies for chemical vapor deposition of two-dimensional organic-inorganic halide perovskiteslink 함아영; 강기범; et al, 한국과학기술원, 2022 |