1 | (A) study on the adaptive control system for turning process using cutting temperature = 절삭 공구 온도를 이용한 선삭작업의 적응제어 시스템link Kim, Jong-Shik; 김종식; et al, 한국과학기술원, 1979 |
2 | (A) study on the new extrusion-forging processes = 새로운 압출-단조 공정에 관한 연구link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1975 |
3 | Aanlysis of three-dimensional extrusion of sections = 3차원 압출의 해석link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1978 |
4 | Analysis of rachetting behavior of a simple pipelink Yoo, Yung-Myun; 유영면; et al, 한국과학기술원, 1976 |
5 | Computing method for the determination of optimal trajectory = 최적궤도의 계산방법에 대하여link Lim, Jin-Soo; 임진수; et al, 한국과학기술원, 1975 |
6 | Cutting characteristics of SCM4 and S55C using tungsten-carbide tool = 초경 공구를 사용한 SCM4 와 S55C 의 절삭 특성 연구link Jinn, Jong-Tae; 진종태; et al, 한국과학기술원, 1979 |
7 | Derivation of mapping fucntions for regions with N-axes of symmetry and its application to stress analysis = 대칭성 도형의 Mapping 함수의 유도와 응력 해석에의 응용link Kim, Kil-Soo; 김길수; et al, 한국과학기술원, 1975 |
8 | Matrix 방법에 의한 링 압축 시험 해석 = Analysis of ring compression test by matrix methodlink 나석주; Na, Suck-Joo; et al, 한국과학기술원, 1977 |
9 | Matrix 방법에 의한 철판 성형의 해석 = Analysis of sheet metal forming by matrix methodlink 김태룡; Kim, Tae-Ryong; et al, 한국과학기술원, 1977 |
10 | Shift link 용 자동유도 brazing 기구의 설계 및 제작 = Design & manufacture of automatic induction brazing machine for shift linklink 조용주; Cho, Yong-Joo; et al, 한국과학기술원, 1979 |
11 | Stress-wave propagation in cylindrical bars = 원통형 봉에서의 응력파의 전파link Lee, Chang-Hee; 이창희; et al, 한국과학기술원, 1976 |
12 | UBET 에 의한 복합 단조의 해석 = An analysis of combind forging by upper bound elementary techniquelink 임종근; Lim, Chong-Keun; 엄윤용; 이중홍; et al, 한국과학기술원, 1982 |
13 | 강소성 유한요소법 을 이용한 축대칭 전방 압출 해석 양동열; 오병수; 이중홍, 대한기계학회논문집 A, v.37, pp.452 - 462, 1985-07 |
14 | 고주파 브레이징 공정에 있어서의 유도 가열에 대한 연구 = A study on the induction heating in the induction brazing processlink 김종혁; Kim, Jong-Hyuk; et al, 한국과학기술원, 1979 |
15 | 기하 계획법을 이용한 최적 절삭 조건의 선정에 관한 연구 = On the selection of optimum machining conditions through geometric programming techniquelink 이봉희; Lee, Bong-Hee; et al, 한국과학기술원, 1979 |
16 | 마이크로-컴퓨터를 이용한 기존 밀링 기계의 수치제어화 = Retrofitting of the conventional milling M/C to an NC milling M/C using the micro-computerlink 김태국; Kim, Tae-Kuk; et al, 한국과학기술원, 1979 |
17 | 마찰상태측정을 위한 ring 압축 시험의 실험적 연구 = An experimental study on ring compression test for friction measurementlink 한영호; Hahn, Young-Ho; et al, 한국과학기술원, 1977 |
18 | 반구형 펀치에 의한 Stretch-forming 의 마찰을 고려한 해석 = Analysis of stretch-forming by hemispherical punch with frictionlink 심현보; Shim, Hyun-Bo; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
19 | 복합 금속 소재 굽힘에 관한 해석 = Analysis of laminated metal strip bendinglink 배원병; Bae, Won-Byong; et al, 한국과학기술원, 1978 |
20 | 선삭가공의 적응제어에 관한 연구 = A study on the adaptive control system for turning processlink 허주; Hoh, Joo; et al, 한국과학기술원, 1980 |
21 | 수치제어에서의 Microprocessor 를 이용한 milling machine 의 3차원 해석과 프로그램 = Application of microprocessor and progrmming in numerical controllink 신영철; Shin, Young-Chul; et al, 한국과학기술원, 1979 |
22 | 스프링의 충격 하중에 관한 연구 = Dynamic loading on helical coil springlink 이성근; Lee, Sung-Gun; et al, 한국과학기술원, 1975 |
23 | 알미늄합금 7075-T6와 구조강 SB41의 파괴인성과 피로균열성장에 관한 연구 = A study on the fracture toughness and fatigue crack growth rate of aluminum alloy 7075-T6 and structural steel SB41link 손갑헌; Sohn, Gap-Heon; et al, 한국과학기술원, 1977 |
24 | 압출-단조 성형의 공정 설계 양동열; 이중홍, 대한기계학회 논문집A, v.16, no.1, pp.83 - 93, 1976-01 |
25 | 유압폐회로 제어시스템의 해석 = An analysis on closed loop hydraulic control systemlink 이정로; Lee, Jeong-Ro; et al, 한국과학기술원, 1978 |
26 | 유한요소법에 의한 FRP 구조물의 응력해석 = The stress analysis of fiber-reinforced plastic structures by finite element methodlink 배동우; Pai, Dong-Woo; et al, 한국과학기술원, 1976 |
27 | 유한요소법에의한치차의응력해석 = Stress analysis of gear by finite element methodlink 조진; Cho, Jin; et al, 한국과학기술원, 1975 |
28 | 자동 공구 교환 장치의 공압을 이용한 개선 = An improvement on the design of automatic tool changer using pneumatic forcelink 박면웅; Park, Myoun-Woong; et al, 한국과학기술원, 1979 |
29 | 자동 공구 교환장치의 설계 = The design of automatic tool changerlink 박태유; Bark, Tae-You; et al, 한국과학기술원, 1977 |
30 | 자동차용부러시레스발전기의 중량최적설계 = Optimum weight design of the automotive brushless generatorlink 양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1975 |
31 | 전산기에 의한 공작기계의 수치제어에 관한 연구 = A study on the computer numerical control of machine toollink 허주; Hoh, Joo; et al, 한국과학기술원, 1976 |
32 | 판재 금속의 성형도에 관한 연구 = A study on the formability of sheet metallink 문의준; Moon, Eui-Joon; et al, 한국과학기술원, 1976 |
33 | 평금형을 통한 형재 압출의 이론 및 실험적고찰 양동열; 이중홍; 김문언, 대한기계학회논문집A, v.4, no.2, pp.39 - 46, 1980-05 |
34 | 평면 응력 Bore expanding 에 있어서의 평면 이방성의 영향 = The effect of planar anisotropy in plane-stress bore expandinglink 주진원; Joo, Jin-Won; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
35 | 평면 응력 Bore Expanding 에 있어서의 평면이방성 의 영향 주진원; 이중홍; 양동열, 대한기계학회논문집 A, v.8, no.5, pp.435 - 441, 1984-01 |
36 | 후방 압출공정의 해석 = Analysis of backward-extrusion processlink 김종규; Kim, Jong-Kyou; et al, 한국과학기술원, 1977 |
37 | 反復應力-變形率關係와 短壽命疲勞 = Cyclic stress-strain relationship and low cycle fatiguelink 양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1978 |