20341 | 장비 로그데이터를 이용한 플라즈마 화학 기상 증착 공정의 가상 계측에 관한 연구 = (A) study on virtual metrology of plasma enhanced chemical vapor deposition using equipment sensor log datalink 박민제; 신하용; et al, 한국과학기술원, 2022 |
20342 | 장애물 탐지에 의한 가변 트랙형 주행로봇의 주행모드 제어 = Driving mode control based on obstacle detection for the mobile robot with variable geometry tracklink 최근하; Choi, Keun-Ha; et al, 한국과학기술원, 2007 |
20343 | 장애물과 간섭하는 고압 고속 비정상 개스유동에 대한 수치적 연구 = Time-dependent simulation of gas flow in interaction with cross-stream obstructionlink 장병희; Chang, Bueung-Hee; et al, 한국과학기술원, 1986 |
20344 | 장애물로 인한 재순환 영역이 있는 이차원 유동장의 수치적 연구 = A numerical study on the channel flow with recirculated flow region due to an obstaclelink 추정호; Chu, Jung-Ho; et al, 한국과학기술원, 1985 |
20345 | 장애물이 있는 수평관에서의 폭굉 현상에 대한 수치연구 = Numerical analysis of detonation phenomena in an obstructed channellink 조소희; Jo, So-Hee; et al, 한국과학기술원, 2013 |
20346 | 장애인용 의복형태 힘 반향 조종기의 센서와 액추에이터 = Sensors and actuators of wearable haptic master device for the disabledlink 이규빈; Lee, Kyoo-Bin; et al, 한국과학기술원, 2000 |
20347 | 장애인을 위한 새로운 입력 장치 개발과 6 자유도 로봇 팔 제어 = Human friendly interfaces of a robot manipulator control system for handicapped personslink 임수철; Lim, Soo-Chul; et al, 한국과학기술원, 2003 |
20348 | 장애인을 위한 휠체어 시스템의 관리제어와 새로운 입력장치 개발 = Supervisory control of a robotic wheelchair system & new interface for the disabledlink 민재웅; Min, Jae-Woong; et al, 한국과학기술원, 2002 |
20349 | 재구성 (Retrofit)에 의한 컴퓨터콘트롤 밀링시스템의 개발 = Development of computer control milling system through retrofitlink 장재대; Chang, Jae-Dae; et al, 한국과학기술원, 1994 |
20350 | 재구성 용이한 C3 시뮬레이션 프레임워크 및 통신 효과도 분석 방법론 = Reconfigurable C3 simulation framework and communication effectiveness analysis methodologylink 강봉구; Kagn, Bong-Gu; et al, 한국과학기술원, 2013 |
20351 | 재구성이 가능한 통신망의 경제적인 용량 계획 = Economic capacity planning of the DCS mesh restorable backbone networklink 표순규; Pyo, Soon-Kyu; et al, 한국과학기술원, 1996 |
20352 | 재귀 원형군 다중컴퓨터에서 Fully-Adaptive Minimal 라우팅 알고리즘의 설계 및 성능 평가 = Design and performance evaluation of a fully-adaptive minimal routing algorithm in recursive circulant multicomputerslink 박재형; Park, Jae-Hyung; et al, 한국과학기술원, 1993 |
20353 | 재귀 원형군 연결망에서 동적 부하 균등 정책의 비교 분석 = Comparison of dynamic load balancing strategies on recursive circulant graphslink 박홍영; Park, Hong-Young; et al, 한국과학기술원, 1995 |
20354 | 재귀원형군 다중컴퓨터를 위한 하드웨어 라우터의 설계 및 구현 = Design and implementation of a hardware router for recursive circulant multicomputerslink 이종민; Lee, Jong-Min; et al, 한국과학기술원, 1994 |
20355 | 재귀원형군 다중컴퓨터의 모델링 및 성능 분석 = Modeling and performance analysis of recursive circulant multicomputerslink 안병규; Ahn, Pyung-Kyu; et al, 한국과학기술원, 1995 |
20356 | 재귀원형군에 대한 Embedding 문제들 = Embedding problems into recursive circulantslink 김숙연; Kim, Sook-Yeon; et al, 한국과학기술원, 1993 |
20357 | 재난 대응을 위한 다수 무인 이동체 분산 작업 계획 기법 연구 = (A) study on a distributed task allocation technique for disaster responselink 김성진; 최한림; et al, 한국과학기술원, 2018 |
20358 | 재난 대처용 휴머노이드 로봇의 임의 유형 밸브 유연 조작에 대한 연구 = Study on valve opening motion of humanoid robot for disaster countermeasurelink 설우진; Seol, Woo-Jin; et al, 한국과학기술원, 2014 |
20359 | 재난 발생시 효율적인 원전 내 위험 작업을 위한 로봇 팔의 최적 설계 = Optimal design of a robot manipulator for nuclear power plant works in a disaster situationlink 한상권; Han, Sang Kwon; et al, 한국과학기술원, 2015 |
20360 | 재료 비선형을 고려한 철근콘크리트 슬래브의 유한요소 해석 = Material nonlinear finite element analysis in reinforced concrete slabslink 곽효경; Kwak, Hyo-Gyoung; et al, 한국과학기술원, 1987 |
20361 | 재방문 물류흐름을 갖는 양 팔 클러스터 장비의 운용전략 = Operating strategies for dual-armed cluster tools with reentrant job flowslink 김수곤; Kim, Su-Gon; et al, 한국과학기술원, 2004 |
20362 | 재분산판이 있는 이중 기포 탑에서 기포와 혼합특성 = Bubble properties and mixing characteristics in an airlift bubble column with redistributorlink 최근호; Choi, Keun-Ho; et al, 한국과학기술원, 1986 |
20363 | 재분석 데이터를 이용한 순차적 근사 최적화 및 구조 최적화에 대한 응용 = Sequential approximate optimization with reanalysis data and its application to structural optimizationlink 이민규; 이병채; et al, 한국과학기술원, 2019 |
20364 | 재사용 가능한 모델들의 플러그인 방식을 이용한 연동 가능 시뮬레이션 프레임워크와 환경 = Framework and environment for interoperable simulation by plug-in of reusable modelslink 배장원; Bae, Jang-Won; et al, 한국과학기술원, 2009 |
20365 | 재사용을 위한 소프트웨어 Component의 식별에 관한 연구 = A study on identification of reusable software componentslink 이영곤; Lee, Young-Gon; et al, 한국과학기술원, 1988 |
20366 | 재사용을 위한 소프트웨어 부품의 분류 및 검색 방법 연구 = A study on classification schemes and retrieval method of software components for reuselink 장명섭; Chang, Myung-Sub; et al, 한국과학기술원, 1991 |
20367 | 재생 시간 버퍼를 이용한 계층화된 비디오의 계층 제어 연구 = Layered video stream control using display time bufferlink 김민철; Kim, Min-Cheol; et al, 한국과학기술원, 2001 |
20368 | 재생기형 환기 열·수분 회수 장치에 관한 연구 = Study on rotary regenerator type ventilator for heat and moisture recoverylink 권재성; Kwon, Jae-Sung; et al, 한국과학기술원, 2005 |
20369 | 재생산소를 이용한 생물반응기용 산소 PSA장치 설계 = Design of oxygen recycle PSA process for bio-reactorlink 류철희; Ryu, Chul-Hee; et al, 한국과학기술원, 2003 |
20370 | 재순환 가스 분사계를 이용한 연료용 에탄올 생산 = Fuel ethanol production using recycled gas purge systemlink 임관열; Lim, Gwan-Yeul; et al, 한국과학기술원, 1984 |
20371 | 재순환 영역 발생 층류 예혼합 화염 연소 소음 특성 = Laminar premixed combustion noise driven by recirculation zonelink 여지훈; 김남일; et al, 한국과학기술원, 2021 |
20372 | 재연소를 이용한 NOx 저감 기법의 FLUENT를 이용한 수치적 연구 및 검증 = Numerical study and verification for NOx reduction using reburning with FLUENTlink 김재관; Kim, Jae-Kwan; et al, 한국과학기술원, 2009 |
20373 | 재인발 가공에서의 한계 인발비 및 성형 하중 예측에 관한 연구 = A study on the prediction of limit-drawing ratio and forming load in redrawinglink 박장호; Park, Jang-Ho; et al, 한국과학기술원, 1981 |
20374 | 재조합 Saccharomyces cerevisiae의 유가식 배양에 의한 monellin 생산 최적화 연구 = A study on the optimization of monellin production by fed-batch culture of a recombinant Saccharomyces cerevisiaelink 전혜경; Chon, Hye-Kyoung; et al, 한국과학기술원, 2002 |
20375 | 재조합 Sacchromyces cerevisiae의 유가식 배양에 의한 외래단백질 생산의 최적화 연구 = A study on the production of foreign protein by fed-batch of a recombinant Saccharomyces cerevisiaelink 이태화; Lee, Tae-Hwa; et al, 한국과학기술원, 2001 |
20376 | 재진입 우주 물체의 낙하 영역 예측을 위한 두 단계 프레임워크 = Two-phase framework for footprint prediction of space object reentrylink 김시우; 안재명; et al, 한국과학기술원, 2019 |
20377 | 재질 재배치에 기반한 제품 디자인 대안의 시각적 탐색 = Material reconfiguration for visual exploration of product design alternativeslink 배현주; 석현정; et al, 한국과학기술원, 2017 |
20378 | 재품형태의 창출을 위한 의미정보의 인식과정에 관한 연구 = A study on the process of perceiving the semantic information for generation of product formlink 박창해; Park, Chang-Hae; et al, 한국과학기술원, 1993 |
20379 | 잭 보드 형태의 표시장치에 적용된 색암호의 효과 = Effects of color coding on a jack board-type displaylink 이동하; Lee, Dong-Ha; 박경수; 황학; et al, 한국과학기술원, 1983 |
20380 | 저 레이놀즈 수 영역에서 플래핑 날개 공력모델에 관한 실험적 연구 = Experimental study on flapping-wing aerodynamic model at low reynolds numberlink 이준성; Lee, Jun-Seong; et al, 한국과학기술원, 2009 |
20381 | 저 소음, 낮은 난류 강도를 갖는 음향 풍동의 설계 = The design of low-noise, low-turbulence acoustic wind tunnellink 차희범; Cha, Hee-Bum; et al, 한국과학기술원, 1995 |
20382 | 저 잡음 시스템-온-패키지를 위한 온-칩 전력 접지 망의 측정 및 분석 = Analysis and measurement of on-chip power/ground network for low noise system-on-packagelink 박현정; Park, Hyun-Jeong; et al, 한국과학기술원, 2005 |
20383 | 저 전계 Inner Field-plate 구조 기반 고전력 FET 소자 설계 및 제작 = Design and fabrication of high-power fets with a low electric-field inner field-plate structurelink 이기원; Lee, Ki-Won; et al, 한국과학기술원, 2007 |
20384 | 저 전력, 고속 구동의 EEPROM을 위한 열 질화 막에 관한 연구 = A study on thermal nitride for low-power and high-speed operating EEPROMlink 최석진; Choi, Seok-Jin; et al, 한국과학기술원, 1998 |
20385 | 저 전송률 부호화 영상에서의 DCT 계수 보정을 통한 블록화 현상 후처리 기법 = Post processing algorithm for blocking artifact reduction in low bit-rate coded images based on DCT coefficient correctionlink 유석봉; Yoo, Seok-Bong; et al, 한국과학기술원, 2011 |
20386 | 저 전송률 압축을 위한 소면적 DCT/IDCT 프로세서의 구현 = Area efficient architecture of DCT/IDCT processor for low bit rate codinglink 장성규; Jang, Sung-Kyu; et al, 한국과학기술원, 1998 |
20387 | 저 전송률 영상 통신을 위한 선택적 오류 은닉 알고리즘 = Selective error concealment algorithm for low bitrate video communicationlink 곽용준; Kwak, Yong-Jun; et al, 한국과학기술원, 2000 |
20388 | 저 전송률 환경에서 영상 압축을 위한 개선된 프레임 속도 제어 = An improved approach to the frame rate control for low bitrate video compressionslink 최훈; Choe, Hun; et al, 한국과학기술원, 1998 |
20389 | 저 전송률의 영상 부호화를 위한 이동 적응형 Frame rate control과 filtering방식 = Motion adaptive frame rate control and filtering method for low-bit rate video codinglink 김민규; Kim, Min-Kyu; et al, 한국과학기술원, 1989 |
20390 | 저 전송율 동영상에서 부호화 잡음 제거를 위한 적응형 필터 = Adaptive filter for coding noise reduction in low bit-rate videolink 노규찬; Roh, Kyu-Chan; et al, 한국과학기술원, 1997 |
20391 | 저 탄소 Fe-Al-N 강의 오스테나이트 결정립 조대화 온도에 미치는 열처리의 영향 = The effect of heat treatment on the austenite grain coarsening temperature in low-carbon Fe-Al-N steelslink 유순영; Yoo, Sun-Young; et al, 한국과학기술원, 1979 |
20392 | 저가의 공압제어 시스템 구성과 그 위치제어에 관한 연구 = On the construction and position control of low cost pneumatic positioning systemslink 홍지중; Hong, Ji-Joong; et al, 한국과학기술원, 1992 |
20393 | 저가의 머신 비전 카메라를 이용한 2차원 미소 진동 측정 = Measurement of two-dimensional, small-amplitude vbration using the low-end machine vision cameralink 김서우; Kim, Seowu; et al, 한국과학기술원, 2015 |
20394 | 저가의 분산보상방식을 채용한 양방향 자기 치유 환형 광통신망 = Bidirectional self-healing ring network with a low cost dispersion compensation methodlink 이상묵; Lee, Sang-Mook; et al, 한국과학기술원, 2002 |
20395 | 저감적분 탄소성 유한요소해석에 의한 평면변형문제에서의 응력계산 = Stress evaluation in plane strain problems by elasto-plastic finite element analysis with reduced integrationlink 김세호; Kim, Se-Ho; et al, 한국과학기술원, 1995 |
20396 | 저강성 저감쇄계의 정밀 위치 제어 = Precision position control of a low stiffness and low damping mechanismlink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1992 |
20397 | 저고도 드론 운용을 위한 시뮬레이션 기반 비행 기술 오차 모델링 기법 연구 = Simulation-based flight technical error modeling for low altitude drone operationslink 한준영; 이지윤; et al, 한국과학기술원, 2018 |
20398 | 저고도 방공 레이더 최적 배치에 관한 연구 = Study on the optimal location of low altitude air defense radarlink 백경혁; Baek, Kyung-Hyeok; et al, 한국과학기술원, 2013 |
20399 | 저고도 인공 위성의 발사 궤적 최적화 = Launch trajectory optimization of low-altitude satelliteslink 유창선; Yoo, Chang-Sun; et al, 한국과학기술원, 1991 |
20400 | 저궤도 우주환경하 탄소섬유강화수지의 충격 특성 및 Whipple Shield 적용 가능성에 대한 연구 = Impact characteristic and application possibility of carbon fiber reinforced plastic for whipple shield under the LEO environmentlink 임건; Lim, Gun; et al, 한국과학기술원, 2011 |