Browse "ME-Theses_Ph.D.(박사논문) " by Subject 최적화

Showing results 1 to 17 of 17

1
3차원 브리지형 탄성힌지 메커니즘을 이용한 압전 구동기의 개발 = Development of piezoactuator using three-dimensional bridge-type hinge mechanismlink

김준형; Kim, Jun-Hyung; et al, 한국과학기술원, 2003

2
(A) study of the motion control for flexible systems to achieve fast movement with less vibration = 고속주행과 진동저감을 위한 유연시스템에서의 모션제어기술에 관한 연구link

Ha, Chang-Wan; 하창완; et al, 한국과학기술원, 2014

3
Analysis and control of kinematically redundant manipulators under inequality constraints = 부등식 구속조건 하에서의 여유자유도 머니퓰레이터의 해석과 제어link

Park, Ki-Cheol; 박기철; et al, 한국과학기술원, 2002

4
Base locationing and workspace mapping for mobile telemanipulators in cluttered envrionment = 장애물 환경에서 이동형 원격로봇의 배치 및 작업영역 변환에 관한 연구link

Park, Young-Soo; 박영수; et al, 한국과학기술원, 1996

5
Control for Optimized Kinesthetic Perception in Scaled Teleoperation of Soft Tissues = 연성 생체조직의 원격조작에서 햅틱 감각 최적화를 위한 제어link

Son, Hyoung-Il; 손형일; et al, 한국과학기술원, 2010

6
DP980 강판의 성형성 향상을 위한 딥 드로잉-전자기 복합 성형 공정의 개발 = Development of combined deep drawing and electromagnetic forming process for enhancing the formability of DP980 steel sheetlink

최민국; Choi, Min Kuk; et al, 한국과학기술원, 2017

7
Optimization of a microchannel heat sink using three-dimensional analysis = 3차원 수치 해석을 통한 마이크로채널 히트싱크의 최적화link

Ryu, Je-Hyoung; 류제형; et al, 한국과학기술원, 2002

8
XML을 활용한 최적설계 마크업 언어의 개발 및 응용 = Development and application of optimal design markup language using XMLlink

신정호; Shin, Jeong-Ho; et al, 한국과학기술원, 2005

9
다중 로봇의 동적 해석과 설계에의 응용 = Dynamic analysis and application to the design of multi-arm robotlink

김충영; Kim, Choong-Young; et al, 한국과학기술원, 1997

10
보이스 코일 구동기의 원리를 이용한 새로운 스피리컬 모터의 설계와 제어에 관한 연구 = Design and control of a new spherical motor using principle of voice coil actuatorlink

김현창; Kim, Hyun-Chang; et al, 한국과학기술원, 2013

11
원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink

오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006

12
유한요소 격자 개선과정을 통한 진동저감 구조형상의 최적화 연구 = Structural shape optimization for minimum vibration using grid improval processeslink

강구태; Kang, Koo-Tae; et al, 한국과학기술원, 1997

13
인코넬 718의 고온 불림 성형성 확보를 위한 최적 블랭크 설계 연구 = A study on blank optimization for blow forming of inconel 718 to secure formability at high temperaturelink

유준태; Yoo, Joon-Tae; et al, 한국과학기술원, 2013

14
저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink

차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002

15
증착률 균일화를 위한 화학증착 반응로에서 운전조건 및 형상 최적화에 관한 연구 = Operating condition and shape optimization of a CVD reactor for uniform film growthlink

조원국; Cho, Won-Kook; et al, 한국과학기술원, 1999

16
크리깅 근사모델과 모멘트법을 이용한 신뢰도 기반 최적설계 = Reliability Based Design Optimization Using a Kriging Metamodel and a Moment Methodlink

주병현; Ju, Byeong-Hyeon; et al, 한국과학기술원, 2008

17
형상최적화를 이용한 마찰과 마멸해석 = Contact and wear analysis by shape optimization approachlink

이창원; Lee, Chang-Won; et al, 한국과학기술원, 2009

rss_1.0 rss_2.0 atom_1.0