22687 | 타원편광분석기의 입사각 정렬에 관한 연구 = Incidence angle alignment method for ellipsometerlink 예상헌; Ye, Sang-Heon; et al, 한국과학기술원, 2002 |
22688 | 타이밍 동기복구에서 패턴지터를 줄이기 위한 강제 국소 대칭 알고리즘 = Pattern jitter reduction in timing recovery through local symmetry forcinglink 황인석; Hwang, In-Seok; et al, 한국과학기술원, 1997 |
22689 | 타이밍 벨트의 영향을 고려한 캠 구동기구의 비틀림진동 해석 = Torsional vibration analysis of cam-driven system considering the effect of timing beltlink 김정우; Kim, Jeong-Woo; et al, 한국과학기술원, 1991 |
22690 | 타이어 다이나믹스를 고려한 종방향 타이어 강성계수 실시간 추정 = Real-time estimation of longitudinal tire stiffness coefficient considering tire dynamicslink 도종용; 최세범; et al, 한국과학기술원, 2021 |
22691 | 타이어 선회 강성 계수 추정을 통한 차량의 사이드 슬립각 추정 개선에 관한 연구 = Theoretical study on improvement of the vehicle side slip angle estimation by tire cornering stiffness adaptationlink 이진승; 최세범; et al, 한국과학기술원, 2018 |
22692 | 타이어 소음 주관 평가 능력 향상을 위한 청음 훈련 방법 = A hearing training method for improving tire noise subjective evaluation abilitylink 강동수; Kang, Dong-Soo; et al, 한국과학기술원, 2011 |
22693 | 타이어 수직 하중 측정을 이용한 타이어-지면 간 마찰 계수 예측에 관한 연구 = Estimation of tire-road friction coefficient using tire vertical load measurementlink 송원종; Song, Won-Jong; et al, 한국과학기술원, 2013 |
22694 | 타이어 음향 공동 공명 특성을 이용한 타이어 압력 감시 시스템 = A tire pressure monitoring system using tire cavity resonancelink 김효식; Kim, Hyo-Sik; et al, 한국과학기술원, 2011 |
22695 | 타이어-차량 인터랙티브 모델 기반 인휠 모터 차량의 토크 분배 전략 = Torque distribution strategy of a in-wheel-motored vehicle based on tire-vehicle interactive modellink 오지열; 최세범; et al, 한국과학기술원, 2022 |
22696 | 타이어-휠 회전 진동 모형을 이용한 실시간 타이어 압력 감시 알고리즘 = Real-time algorithm for the tire pressure monitoring system using a rotating tire-wheel vibration modellink 안소현; Ahn, So-Hyun; et al, 한국과학기술원, 2013 |
22697 | 타이어바닥부 가진시험 기반 전차량 10-자유도 집중매개변수 모형화 = 10-degree of freedom modeling of full car based on analysis of responses to base excitationslink 김미르; 김광준; et al, 한국과학기술원, 2017 |
22698 | 타이어에 기인한 차실 내부 도로소음의 진동-음향계 모델링에 관한 연구 = A study on the vibro-acoustic modeling of road noise inside the vehicle originated from tirelink 조민철; Cho, Min-Chul; et al, 한국과학기술원, 2008 |
22699 | 타이어와 지면간 마찰계수의 실시간 추정 알고리즘 개발 = Development of algorithm for the real-time estimation of friction coefficient between tire and roadlink 박승욱; Park, Seung-Uk; et al, 한국과학기술원, 2003 |
22700 | 타이어의 회전변형이 ABS에 미치는 영향 = Effect of rotational deformation of tire on antilock brake systemlink 박준모; Park, Joon-Mo; et al, 한국과학기술원, 1997 |
22701 | 타이타늄 내에서의 수소 확산 = The diffusion of hydrogen in titaniumlink 이용태; Lee, Yong-Tai; et al, 한국과학기술원, 1976 |
22702 | 탄산 칼슘 입자로 충진된 저밀도 폴리에틸렌 블로운 필름 공정에 Kelvin-voigt 모델의 적용 = Application of kelvin-voigt model to blown film process of LDPE filled with calcium carbonate particleslink 장상홍; Chang, Sang-Hong; et al, 한국과학기술원, 1984 |
22703 | 탄성 기초부 위에 있는 다점지지 마운트계의 진동절연기법연구 및 콤프레서계에의 응용 = A study on vibration isolation technique for multi-point mounts on elastic base structure and its application to a compressor systemlink 이영빈; Lee, Young-Bin; et al, 한국과학기술원, 1998 |
22704 | 탄성 반력과 자력을 이용한 mobile device용 소형 촉감 모듈의 개발 = Development of a new miniature tactile module for mobile device using elastic force of restitution & magnetic forcelink 양태헌; Yang, Tae-Heon; et al, 한국과학기술원, 2008 |
22705 | 탄성 보행 모델을 이용한 단일 RGB 영상기반 지면반력 추정기법 = Ground reaction force estimation method based on a single RGB camera using spring walking modellink 정현호; 박수경; et al, 한국과학기술원, 2019 |
22706 | 탄성 인쇄회로기판 기술을 위한 고분자에서의 전도성 액체금속 네트워크의 보편적 합성 = Universal synthesis of conductive liquid metal network in polymers enabling elastic printed circuit board technologylink 이원범, 한국과학기술원, 2022 |
22707 | 탄성-점소성 재료의 구성방정식 및 변형의 국부집중에 관한 이론적 연구 = A theoretical study of constitutive equations and localization in elastic-viscoplastic materialslink 범현규; Beom, Hyeon-Gyu; et al, 한국과학기술원, 1988 |
22708 | 탄성각 보행 모델 기반 전후 방향 지면반력 추정 기법 = Estimating anterior-posterior ground reaction force using compliant legged walking modellink 류한솔; Ryu, Hansol; et al, 한국과학기술원, 2016 |
22709 | 탄성원형 평판에 탄성구의 충돌로 인한 음압복사 = Sound radiation from the impact of a ball on elastic circular plateslink 김도중; Kim, Do-Joong; et al, 한국과학기술원, 1983 |
22710 | 탄성중합체 직렬 탄성 액추에이터의 토크 제어를 위한 히스테리시스 모델링 = Hysteresis modeling for torque control of elastomer series elastic actuatorslink 김동현; 오준호; et al, 한국과학기술원, 2018 |
22711 | 탄성해석을 위한 양의 정부호성을 갖는 혼합 변분 원리에 관한 연구 = A study on deriving positive definite forms of the mixed variational principle in linear elastic analysislink 이용주; Lee, Yong-Joo; 곽병만; 이병채; et al, 한국과학기술원, 1988 |
22712 | 탄소 및 유리 단섬유 보강 복합재료의 마찰 마모 거동 = Tribological behavior of short fiber reinforced poly(amide-imide) compositeslink 이기현; Lee, Kee-Hyun; et al, 한국과학기술원, 1990 |
22713 | 탄소 섬유 보강 폴리에테르에테르케톤의 마찰 및 마모 거동에 관한 연구 = A study on friction and wear behavior of carbon fiber reinforced polyetheretherketonelink 류성국; Ryoo, Sung-Kuk; et al, 한국과학기술원, 2000 |
22714 | 탄소 섬유 에폭시 복합재료 절단 연삭의 특성 연구 = A study on the cut-off grinding characteristics of the carbon fiber epoxy composite materialslink 김포진; Kim, Po-Jin; et al, 한국과학기술원, 1999 |
22715 | 탄소 응집체 층 내 기체흡착에 대한 연구 : 수소저장 = Gas adsorption in the layers of carbon aggregates : hydrogen storagelink 김중혁; Kim, Joong-Hyuk; et al, 한국과학기술원, 2003 |
22716 | 탄소 입자·기체 혼합물의 충격파에 의한 점화 현상 = Interaction of a moving shock wave with carbon particle-laden oxygen gaslink 박준성; Park, Jun-Sung; et al, 한국과학기술원, 2001 |
22717 | 탄소 첨가에 따른 WC-12 % Fe-3%Ni 초경합금의 기계적 성질 변화 = Effect of carbon addition on the properties of WC-12 % Fe-3% Ni alloylink 김인응; Kim, In-Eung; et al, 한국과학기술원, 1981 |
22718 | 탄소/탄소 복합재료의 마찰 및 마모 거동과 신경회로망에의 적용에 관한 연구 = Friction and wear behavior of carbon/carbon composite materials and its application to a neural networklink 류병진; Ryu, Byeong-Jin; et al, 한국과학기술원, 1994 |
22719 | 탄소/탄소 브레이크 디스크의 기계적 특성에 관한 연구 = Mechanical characteristics of carbon/carbon composite for aircraft brake disklink 유재석; Yoo, Jae-Seok; et al, 한국과학기술원, 1997 |
22720 | 탄소/페놀 복합재료 저널 베어링의 개발 = Development of carbon/phenolic composite journal bearinglink 김성수; Kim, Seong-Su; et al, 한국과학기술원, 2004 |
22721 | 탄소가 3% 규소 강판의 2차 재결정에 미치는 영향 = Effects of carbon on the secondary recrystallization in 3 % silicon steellink 송재성; Song, Jae-Sung; 임호빈; 김영걸; et al, 한국과학기술원, 1982 |
22722 | 탄소가 첨가된 TiAl합금의 미세조직제어 = Microstructure control in carbon-doped TiAl alloyslink 김보현; Kim, Bo-Hyun; et al, 한국과학기술원, 1999 |
22723 | 탄소강 (SM45C) 을 선삭할때 진 공구경 사각이 절삭기구에 미치는 영향 = The effect of true rake angle on cutting mechanism in machining medium carbon steel (SM45C)link 김정석; Kim, Jeong-Suck; et al, 한국과학기술원, 1979 |
22724 | 탄소강과 SUS 304의 진공브레이징에서 브레이징 변수가 접합강도에 미치는 영향 = Influence of brazing parameters on the strength of vacuum-brazed joints between carbon steels and 304stainless steellink 이창동; Lee, Chang-Dong; et al, 한국과학기술원, 1988 |
22725 | 탄소기반 소자를 위한 그래핀 합성과 전사 방법 연구 = A study on graphene synthesis and transfer method for carbon based devicelink 노영달; Roh, Young-Dal; et al, 한국과학기술원, 2011 |
22726 | 탄소기반 소자를 위한 그래핀 합성과 전사 방법 연구 = A study on graphene synthesis and transfer method for carbon based devicelink 노영달; Roh, Young-Dal; et al, 한국과학기술원, 2011 |
22727 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
22728 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
22729 | 탄소나노튜브 복합 섬유 센서를 이용한 유리섬유 복합재 구조에서의 변형률 및 층간분리 검출에 관한 연구 = CNT/Polymer Composite fiber sensor-based strain and delamination detection on GFRP composite structurelink 김경환; 이정률; et al, 한국과학기술원, 2019 |
22730 | 탄소나노튜브 페이스트를 이용한 field emitter의 제작 및 구동 중 발생하는 탄소나노튜브의 구조적 변화에 대한 특성 고찰 = Characterization of preparation- and operation-induced structural defects of field emitter based on CNT pastelink 이연주; Lee, Yeon-Ju; et al, 한국과학기술원, 2007 |
22731 | 탄소나노튜브 포화흡수체 거울을 이용한 1.2 GHz 반복률 다이오드 펌핑 Yb:KYW 모드잠금 펨토초레이저 개발 = 1.2 GHz repetition rate, diode-pumped femtosecond Yb:KYW laser mode-locked by a carbon nanotube saturable absorber mirrorlink 양희원; Yang, Hee-Won; et al, 한국과학기술원, 2013 |
22732 | 탄소나노튜브-팁을 위한 다자유도 나노 정렬 시스템 = Multi-DOF nano aligner system for CNT-Tiplink 강경수; Kang, Gyung-Soo; et al, 한국과학기술원, 2004 |
22733 | 탄소나노튜브가 분산된 평직 탄소 섬유 / 에폭시 복합재료의 감쇠특성 = Damping characteristics of carbon nanotubes dispersed woven carbon fiber / epoxy compositelink 김희철; Kim, Hee-Chul; et al, 한국과학기술원, 2011 |
22734 | 탄소나노튜브가 분산된 평직 탄소 섬유 / 에폭시 복합재료의 감쇠특성 = Damping characteristics of carbon nanotubes dispersed woven carbon fiber / epoxy compositelink 김희철; Kim, Hee-Chul; et al, 한국과학기술원, 2011 |
22735 | 탄소나노튜브가 코팅된 다공성 탄성중합체를 이용한 유연 압력센서의 개발 = Development of CNT-coated porous elastomer based flexible pressure sensorlink 김승환; Kim, Seunghwan; et al, 한국과학기술원, 2016 |
22736 | 탄소나노튜브를 이용한 3차원 구조 전계방출에미터의 제조 및 특성 연구 = Fabrication and Characterization of 3D Structure Field Emitter using Carbon Nanotubelink 황재원; Hwang, Jae-Won; et al, 한국과학기술원, 2009 |
22737 | 탄소나노튜브를 첨가한 나노 복합재료의 기계적/물리적 특성 변화 연구 = Mechanical and physical properties changes of nanocomposites due to addition of carbon nanotubeslink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2003 |
22738 | 탄소나노튜브의 화학적 개질과 폴리스티렌/탄소나노튜브 복합체의 제조 연구 = Study on chemical modification of carbon nanotubes and preparation of polystyrene/carbon nanotubes compositeslink 함형택; Ham, Hyeong-Taek; et al, 한국과학기술원, 2002 |
22739 | 탄소섬유 강화 플라스틱 Angle-ply laminate 에서의 파괴 특성 = Fracture behavior of carbon fiber reinforced plastics in angle-ply laminateslink 도영대; Do, Yeong-Dai; et al, 한국과학기술원, 1981 |
22740 | 탄소섬유 및 고체전해질을 이용한 구조전지의 전기적 특성과 활용가능성 = Electrical characteristics and applicability of structure-batteries using carbon fabric and solid electrolytelink 박미영; Park, Mi-Young; et al, 한국과학기술원, 2012 |
22741 | 탄소섬유/에폭시 복합체의 경화공정 중 물성변화 = Property change during the curing process of carbon fiber/epoxy compositelink 류동조; Lyou, Dong-Jo; et al, 한국과학기술원, 1993 |
22742 | 탄소섬유강화 복합재료의 변형률속도에 따른 인장물성의 평가 = Tensile properties of carbon/epoxy composite laminate at high strain rateslink 최재영; Choi, Jae-Young; et al, 한국과학기술원, 2013 |
22743 | 탄소성 유한요소법을 이용한 박판 성형 공정 해석 = Numerical simulations of sheet forming processes by an elasto-plastic finite element methodlink 최태훈; Choi, Tae-Hoon; et al, 한국과학기술원, 1993 |
22744 | 탄소성 유한요소법을 이용한 비드 성형의 수치해석 = Numerical simulation of bead formation by an elasto-plastic finite element methodlink 천병관; Chun, Byung-Kwan; et al, 한국과학기술원, 1992 |
22745 | 탄소와 황이 W-Ni-Fe 중합금의 취성에 미치는 영향 = The embrittling effect of carbon and sulfur in W-Ni-Fe heavy alloylink 이영종; Lee, Yong-Jong; et al, 한국과학기술원, 1987 |
22746 | 탄소입자와 기체의 혼합물에 있어서의 이상폭발현상구조에 관한 수치적 연구 = The structure of two-phase detonation in carbon-particles laden gaseslink 승성표; Seung, Seong-Pyo; et al, 한국과학기술원, 1988 |