Browse "NE-Journal Papers(저널논문)" by Subject MECHANICAL-PROPERTIES
Showing results 1 to 60 of 61
| A combinatorial approach for the synthesis and analysis of AlxCryMozNbTiZr high-entropy alloys: Oxidation behavior Waseem, Owais Ahmed; Auyeskan, Ulanbek; Lee, Hyuck-Mo; Ryu, Ho Jin, JOURNAL OF MATERIALS RESEARCH, v.33, no.19, pp.3226 - 3234, 2018-10 |
| A critical review on temperature dependent irradiation response of high entropy alloys Hussain, Abid; Dhaka, R. S.; Ryu, Ho Jin; Sharma, Saurabh Kumar; Kulriya, Pawan Kumar, JOURNAL OF ALLOYS AND COMPOUNDS, v.948, 2023-07 |
| Additive manufacturing of oxide dispersion-strengthened CoCrNi medium-entropy alloy by in situ oxide synthesis Chung, SeungHyeok; Lee, Taegyu; Jeong, Wonjong; Kong, Byeong Seo; Ryu, Ho Jin, JOURNAL OF ALLOYS AND COMPOUNDS, v.965, 2023-11 |
| An atomically quantized hierarchy of shear transformation zones in a metallic glass Ju, J. D.; Jang, Dongchan; Nwankpa, A.; Atzmon, M., JOURNAL OF APPLIED PHYSICS, v.109, no.5, 2011-03 |
| Analytical modeling to calculate the hardness of ultra-fine WC-Co cemented carbides Cha, Seung I; Lee, Kyong Ho; Ryu, Ho Jin; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.489, no.1-2, pp.234 - 244, 2008-08 |
| Catastrophic vs Gradual Collapse of Thin-Walled Nanocrystalline Ni Hollow Cylinders As Building Blocks of Microlattice Structures Lian, Jie; Jang, Dongchan; Valdevit, Lorenzo; Schaedler, Tobias A.; Jacobsen, Alan J.; Carter, William B.; Greer, Julia R., NANO LETTERS, v.11, no.10, pp.4118 - 4125, 2011-10 |
| Combinatorial development of the low-density high-entropy alloy Al10Cr20Mo20Nb20Ti20Zr10 having gigapascal strength at 1000 degrees C Waseem, Owais Ahmed; Ryu, Ho Jin, JOURNAL OF ALLOYS AND COMPOUNDS, v.845, 2020-12 |
| Combinatorial synthesis and analysis of AlxTayVz-Cr20Mo20Nb20Ti20Zr10 and Al10CrMoxNbTiZr10 refractory high-entropy alloys: Oxidation behavior Waseem, Owais Ahmed; Ryu, Ho Jin, JOURNAL OF ALLOYS AND COMPOUNDS, v.828, 2020-07 |
| Development of alumina-forming duplex stainless steels as accident-tolerant fuel cladding materials for light water reactors Kim, Hyunmyung; Jang, Hun; Subramanian, Gokul Obulan; Kim, Chaewon; Jang, Changheui, JOURNAL OF NUCLEAR MATERIALS, v.507, pp.1 - 14, 2018-08 |
| Effect of heat treatment on corrosion behaviour of additively manufactured 316L stainless steel in high-temperature water Xiao, Qian; Chen, Junjie; Lee, Hyeon Bae; Jang, Changheui; Jang, Kyungnam, CORROSION SCIENCE, v.210, 2023-01 |
| Effect of microstructure evolution at the interphase boundary on the thermal ageing embrittlement of CF8M cast austenitic stainless steel Kong, Byeong Seo; Shin, Ji Ho; Jeong, Chaewon; Jang, Changheui; Kang, Sung-Sik, INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, v.198, 2022-08 |
| Effect of Nb on hydride embrittlement of Zr-xNb alloys Oh, Seungjin; Jang, Changheui; Kim, Jun Hwan; Jeong, Yong Hwan, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.527, no.6, pp.1306 - 1313, 2010-03 |
| Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites Lee, Taegyu; Lee, Junho; Lee, Donghyun; Jo, Ilguk; Lee, Sang Kwan; Ryu, Ho Jin, JOURNAL OF ALLOYS AND COMPOUNDS, v.831, 2020-08 |
| Elevated temperature ablation resistance of HfC particle-reinforced tungsten composites Lee, Dongju; Umer, Malik Adeel; Ryu, Ho Jin; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.43, pp.89 - 93, 2014-03 |
| Embrittlement and hardening during thermal aging of high Cr oxide dispersion strengthened alloys Lee, JS; Jang, Changheui; Kim, In Sup; Kimura, A, JOURNAL OF NUCLEAR MATERIALS, v.367, pp.229 - 233, 2007-08 |
| Enhanced electromagnetic interference shielding behavior of Graphene Nanoplatelet/Ni/Wax nanocomposites Im, Hye Ji; Jun, Gwang Hoon; Lee, Dong Ju; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF MATERIALS CHEMISTRY C, v.5, no.26, pp.6471 - 6479, 2017-07 |
Enhancement of toughness and wear resistance in boron nitride nanoplatelet (BNNP) reinforced Si3N4 nanocomposites Lee, Bin; Lee, Dongju; Lee, Jun Ho; Ryu, Ho Jin; Hong, Soon Hyung, SCIENTIFIC REPORTS, v.6, 2016-06 |
| Evaluation of the thermal aging of delta-ferrite in austenitic stainless steel welds by electrochemical analysis Subramanian, Gokul Obulan; Kong, Byeong Seo; Lee, Ho Jung; Jang, Changheui, SCIENTIFIC REPORTS, v.8, 2018-10 |
| Evaluation of thermal ageing activation energy of delta-ferrite in an austenitic stainless steel weld using nanopillar compression test Kong, Byeong Seo; Shin, Jiho; Subramanian, Gokul Obulan; Chen, Junjie; Jang, Changheui; Na, Ye-eun; Jang, Dongchan; et al, SCRIPTA MATERIALIA, v.186, pp.236 - 241, 2020-09 |
| Fabrication and deformation of three-dimensional hollow ceramic nanostructures Jang, Dongchan; Meza, Lucas R.; Greer, Frank; Greer, Julia R., NATURE MATERIALS, v.12, no.10, pp.893 - 898, 2013-10 |
| Fabrication of Protective-coated SiC Reinforced Tungsten Matrix Composites with Reduced Reaction Phases by Spark Plasma Sintering Umer, Malik Adeel; Lee, Dongju; Waseem, Owais Ahmed; Ryu, Ho Jin; Hong, Soon Hyung, METALS AND MATERIALS INTERNATIONAL, v.22, no.3, pp.493 - 500, 2016-05 |
| FABRICATION OF ZrO2-BASED NANOCOMPOSITES FOR TRANSURANIC ELEMENT-BURNING INERT MATRIX FUEL Mistarihi, Qusai; Umer, Malik Adeel; Kim, Joon Hui; Hong, Soon Hyung; Ryu, Ho Jin, NUCLEAR ENGINEERING AND TECHNOLOGY, v.47, no.5, pp.617 - 623, 2015-08 |
| Feasibility assessment of the alumina-forming duplex stainless steels as accident tolerant fuel cladding materials for light water reactors Kim, Chaewon; Kim, Hyunmyung; Jang, Changheui; Kim, Kangsan; Kim, Yonghee; Lee, Seungjae; Jang, Hun, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.44, no.10, pp.8074 - 8088, 2020-08 |
| First-principles study for discovery of novel synthesizable 2D high-entropy transition metal carbides (MXenes) Seong, Hyun Woo; Lee, Min Seok; Ryu, Ho Jin, JOURNAL OF MATERIALS CHEMISTRY A, v.11, no.11, pp.5681 - 5695, 2023-03 |
| Flexible Hard Coating: Glass-Like Wear Resistant, Yet Plastic-Like Compliant, Transparent Protective Coating for Foldable Displays Choi, Gwang Mun; Jin, Jungho; Shin, Dahye; Kim, Yun Hyeok; Ko, Ji-Hoon; Im, Hyeon-Gyun; Jang, Junho; et al, ADVANCED MATERIALS, v.29, no.19, 2017-05 |
| Functionalization of carbon nanotubes for fabrication of CNT/epoxy nanocomposites Cha, Jaemin; Jin, Sunghwan; Shim, Jae Hun; Park, Chong Soo; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS AND DESIGN, v.95, pp.1 - 8, 2016-04 |
| Grain-size dependence of plastic deformation in nanocrystalline Fe Jang, D; Atzmon, M, JOURNAL OF APPLIED PHYSICS, v.93, no.11, pp.9282 - 9286, 2003-06 |
| High conductivity and stretchability of 3D welded silver nanowire filled graphene aerogel hybrid nanocomposites Oh, Jae Young; Lee, Dongju; Jun, Gwang Hoon; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF MATERIALS CHEMISTRY C, v.5, no.32, pp.8211 - 8218, 2017-08 |
| High temperature ablation resistance of ZrNp reinforced W matrix composites Umer, Malik Adeel; Lee, Dong Ju; Ryu, Ho Jin; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.42, pp.17 - 22, 2014-01 |
| High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids Gwalani, Bharat; Pohan, Rizaldy M.; Lee, Junho; Lee, Bin; Banerjee, Rajarshi; Ryu, Ho Jin; Hong, Soon Hyung, SCIENTIFIC REPORTS, v.8, 2018-09 |
| Improvement of Corrosion Resistance of Stainless Steel Welded Joint Using a Nanostructured Oxide Layer Heo, Jun; Lee, Sang Yoon; Lee, Jaewoo; Alfantazi, Akram; Cho, Sung Oh, NANOMATERIALS, v.11, no.4, 2021-04 |
| Improvement of modulus, strength and fracture toughness of CNT/Epoxy nanocomposites through the functionalization of carbon nanotubes Cha, Jaemin; Jun, Gwang Hoon; Park, Jong Kyoo; Kim, Jung Cheol; Ryu, Ho Jin; Hong, Soon Hyung, Composite Part B:Engineering, v.129, pp.169 - 179, 2017-07 |
| In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering Lee, Junho; Lee, Dongju; Song, Myung Hoon; Rhee, Wonhyuk; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.34, no.8, pp.1397 - 1404, 2018-08 |
| Influence of Homogeneous Interfaces on the Strength of 500 nm Diameter Cu Nanopillars Jang, Dongchan; Cai, Can; Greer, Julia R., NANO LETTERS, v.11, no.4, pp.1743 - 1746, 2011-04 |
| Micro-beam bending of FCC bicrystals: A comparison between defect dynamics simulations and experiments Aragon, Nicole K.; Na, Ye-eun; Nguyen, Phu Cuong; Jang, Dongchan; Ryu, Ill, MATERIALIA, v.32, 2023-12 |
| Microstructural Evolution of Al-Zn-Mg-Cu Alloys in Accordance with Homogenization Time An, Woojin; Heo, Jaewon; Jang, Dongchan; Euh, Kwang Jun; Jung, Im Doo; Kim, Sangshik; Sung, Hyokyung, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.20, no.11, pp.6890 - 6896, 2020-11 |
| Microstructures, tensile properties and corrosion behaviors of Fe20Cr25NiNb stainless steels with different Al contents in supercritical carbon dioxide Chen, Hongsheng; Luo, Jiandong; Zhang, Tengfei; Jang, Changheui; Tang, Rui; Dong, Baojun; Li, Jin; et al, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.23, pp.5246 - 5259, 2023-03 |
| Mo and Ta addition in NbTiZr medium entropy alloy to overcome tensile yield strength-ductility trade-off Akmal, Muhammad; Seong, Hyun Woo; Ryu, Ho Jin, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.109, pp.1 - 10, 2022-05 |
| Multifunctional Polymer Nanocomposites Reinforced by 3D Continuous Ceramic Nanofillers Ahn, Changui; Kim, Sang-Min; Jung, Jae-Wook; Park, Junyong; Kim, Taegeon; Lee, Sang Eon; Jang, Dongchan; et al, ACS NANO, v.12, no.9, pp.9126 - 9133, 2018-09 |
| On Strength of Brittle Nanomaterials: Confinement Effect on Weibull Distributions Shin, Dahye; Jang, Dongchan, FRONTIERS IN MATERIALS, v.6, 2019-11 |
| On the feasibility of duplex stainless steel 2205 as an accident tolerant fuel cladding material for light water reactors Xiao, Qian; Kim, Chaewon; Jang, Changheui; Jeong, Chaewon; Kim, Hyunmyung; Chen, Junjie; Heo, Woong, JOURNAL OF NUCLEAR MATERIALS, v.557, 2021-12 |
| One-step functionally graded materials fabrication using ultra-large temperature gradients obtained through finite element analysis of field-assisted sintering technique Sweidan, Faris B.; Ryu, Ho Jin, MATERIALS & DESIGN, v.192, pp.108714, 2020-07 |
| Overcoming brittleness of high volume fraction Al/SiCp composites by controlling interface characteristics Lee, Taegyu; Chae, Hobyung; Shin, Sangmin; Cho, Seungchan; Lee, Sang-Kwan; Lee, Soo Yeol; An, Ke; et al, MATERIALS & DESIGN, v.222, 2022-10 |
| Plasma spheroidized MoNbTaTiZr high entropy alloy showing improved plasticity Akmal, Muhammad; Park, Hyung-Ki; Ryu, Ho Jin, MATERIALS CHEMISTRY AND PHYSICS, v.273, 2021-11 |
| Plasticity of indium nanostructures as revealed by synchrotron X-ray microdiffraction Budiman, Arief Suriadi; Lee, Gyuhyon; Burek, Michael J.; Jang, Dongchan; Han, Seung Min J.; Tamura, Nobumichi; Kunz, Martin; et al, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.538, pp.89 - 97, 2012-03 |
| Powder Metallurgy Processing of a WxTaTiVCr High-Entropy Alloy and Its Derivative Alloys for Fusion Material Applications Waseem, Owais Ahmed; Ryu, Ho Jin, SCIENTIFIC REPORTS, v.7, 2017-05 |
| Role of B4C in the directed energy deposition of aluminum alloy 6061/B4C composite using core-shell powder for crack annihilation, pore mitigation, and grain refinement Lee, Taegyu; Jeong, Wonjong; Chung, SeungHyeok; Kim, Jae Joon; Lee, Donghyun; Kim, Junghwan; Ryu, Ho Jin, ADDITIVE MANUFACTURING, v.72, 2023-06 |
| Scalable Exfoliation Process for Highly Soluble Boron Nitride Nanoplatelets by Hydroxide-Assisted Ball Milling Lee, Dongju; Lee, Bin; Park, Kwang Hyun; Ryu, Ho Jin; Jeon, Seokwoo; Hong, Soon-Hyung, NANO LETTERS, v.15, no.2, pp.1238 - 1244, 2015-02 |
| Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars Jang, Dongchan; Greer, Julia R., SCRIPTA MATERIALIA, v.64, no.1, pp.77 - 80, 2011-01 |
| Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3 Gwalani, Bharat; Pohan, Rizaldy M.; Waseem, Owais Ahmed; Alam, Talukder; Hong, Soon Hyung; Ryu, Ho Jin; Banerjee, Rajarshi, SCRIPTA MATERIALIA, v.162, pp.477 - 481, 2019-03 |
| Stress contribution of B2 phase in Al0.7CoCrFeNi eutectic high entropy alloy Yun, Daeho; Chae, Hobyung; Lee, Taegyu; Lee, Dong-Hyun; Ryu, Ho Jin; Banerjee, Rajarshi; Harjo, Stefanus; et al, JOURNAL OF ALLOYS AND COMPOUNDS, v.918, 2022-10 |
| Systematic study of (MoTa)(x)NbTiZr medium- and high-entropy alloys for biomedical implants- In vivo biocompatibility examination Muhammad, Akmal; Ahtesham, Hussain; Muhammad Afzal; Lee, Yopng Ik; Ryu, Ho Jin, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.78, pp.183 - 191, 2021-07 |
| Tensile behavior of SiCp/2124Al composites with various SiC particle sizes at room temperature Li, DQ; Ryu, Ho Jin; Hong, Soon-Hyung, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v.10, no.6, pp.732 - 736, 2000-12 |
| The effects of Y pre-alloying on the in-situ dispersoids of ODS CoCrFeMnNi high-entropy alloy Chung, SeungHyeok; Lee, Bin; Lee, Soo Yeol; Do, Changwoo; Ryu, Ho Jin, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.85, pp.62 - 75, 2021-09 |
| The outstanding tensile strength of Ni-rich high entropy superalloy fabricated by powder metallurgical process Kang, Byungchul; Kong, Taeyeong; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS CHEMISTRY AND PHYSICS, v.235, 2019-09 |
| Thermal conductivity of Mo-reinforced ZrO2 composites fabricated by spark plasma sintering for inert matrix fuels Mistarihi, Qusai M.; Raj, Vivek; Kim, Joon Hui; Ryu, Ho Jin, MATERIALS AND DESIGN, v.134, pp.476 - 485, 2017-11 |
| Ti-Zr-Nb based BCC alloy containing Mo prepared by laser directed energy deposition-ω phase and cellular structure Akmal, Muhammad; Jeong, Wonjong; Ryu, Ho Jin, JOURNAL OF ALLOYS AND COMPOUNDS, v.969, 2023-12 |
| Toughening of a low-activation tungsten alloy using tungsten short fibers and particles reinforcement for fusion plasma-facing applications Waseem, Owais Ahmed; Ryu, Ho Jin, NUCLEAR FUSION, v.59, no.2, 2019-02 |
| Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses Jang, Dongchan; Greer, Julia R., NATURE MATERIALS, v.9, no.3, pp.215 - 219, 2010-03 |
| Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process Kang, Byungchul; Lee, Junho; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.712, pp.616 - 624, 2018-01 |
Discover
Type
- 2,796 Article
Open Access
- 152 OA Article
Date issued
- 485 2020 - 2024
- 1,120 2010 - 2019
- 712 2000 - 2009
- 369 1990 - 1999
- 110 1980 - 1989