1 | 316L 스테인레스 강의 단시간 변온 크립 거동에 관한 연구 = A study on the short term creep behavior of 316L stainless steels under varying temperaturelink 홍성구; Hong, Seong-Gu; 엄윤용; 이순복; et al, 한국과학기술원, 1999 |
2 | 316L 스테인리스 강의 다축 피로 수명 예측과 신뢰도 평가에 대한 추계적 모델링 = A stochastic modeling of multiaxial fatigue life prediction and reliability assessment of 316L stainless steelslink 권혁준; Kwon, Hyuk-Jun; 엄윤용; 이순복; et al, 한국과학기술원, 1999 |
3 | AISI 4140 강의 파괴 인성치 측정 = Fracture toughness $(J_{IC})$ measurement of AISI 4140 steellink 최성렬; Choi, Sung-Ryul; et al, 한국과학기술원, 1982 |
4 | Al 7039 의 피로균열 진전 거동에 관한 연구 = A study on fatigue crack growth behavior of Al 7039link 김영종; Kim, Young-Jong; et al, 한국과학기술원, 1983 |
5 | CCT시편의 $J_{ic}$ 및 J-저항 곡선의 측정 = $J_{ic}$ and J-resistance curve measurement for center-cracked-tension specimenlink 이주훈; Lee, Ju-Hun; et al, 한국과학기술원, 1984 |
6 | COD-저항 곡선을 이용한 불안정 균열 성장의 예측 = An experimental evaluation of tearing instability based on COD-R curvelink 한창석; Han, Chang-Seok; 엄윤용; 송지호; et al, 한국과학기술원, 1986 |
7 | L 적분을 이용한 원호계면균열에서의 응력강도계수계산 = Evaluation of stress intensity factor using L integral in arc-shaped interfacial cracklink 황철규; Hwang, Cheol-Gyu; et al, 한국과학기술원, 1991 |
8 | Mode Ⅲ 하중을 받는 균열의 유한 요소법에 의한 탄소성 해석 = Elastic-plastic analysis of cracks under mode Ⅲ loading by finite element methodlink 채영석; Chai, Young-Suck; et al, 한국과학기술원, 1981 |
9 | SA106 Gr.C 배관재의 파괴인성치에 미치는 동적변형시효의 영향 = Effect of dynamic strain aging on fracture toughness fo SA106 Gr.C piping steellink 김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1997 |
10 | SCM4 의 동파괴 인성치에 관한 실험적 연구 = An experimental investigation on the dynamic fracture toughness of SCM4link 민운식; Min, Un-Sig; et al, 한국과학기술원, 1985 |
11 | SEA를 이용한 한 면이 탄성판인 직방형상자의 복사저항의 계산 = Simulation of the radiation resistancefor a parallel-piped box with a side of the elastic plate by using the SEA methodlink 임종윤; Lim, Jong-Yun; 엄윤용; 이병호; et al, 한국과학기술원, 1990 |
12 | UBET 에 의한 복합 단조의 해석 = An analysis of combind forging by upper bound elementary techniquelink 임종근; Lim, Chong-Keun; 엄윤용; 이중홍; et al, 한국과학기술원, 1982 |
13 | Unloading compliance 법에 의한 S45C(JIS) 중탄소 강의 파괴 인성치 측정 = Fracture toughness (jic) measurement of medium carbon steel by unloading compliance methodlink 최숭남; Choi, Soong-Nam; et al, 한국과학기술원, 1981 |
14 | 계면 균열의 새로운 모델 = A new model for interface cracklink 조종두; Cho, Chong-Doo; et al, 한국과학기술원, 1985 |
15 | 계면균열 문제에서 M-적분의 계산 = Evaluation of M-integral in interfacial crack problemlink 반용운; Pahn, Lyong-Oon; et al, 한국과학기술원, 1992 |
16 | 곡률측정법을 이용한 점탄성 박막의 잔류응력에 관한 연구 = A study on residual stress in viscoelastic thin film using curvature measurement methodlink 임영태; Im, Young-Tae; et al, 한국과학기술원, 2001 |
17 | 공간 프레임 구조물의 유한요소 비선형해석 = Finite element nonlinear analysis of space frame structureslink 이상태; Lee, Sang-Tae; 곽병만; 엄윤용; et al, 한국과학기술원, 1988 |
18 | 구형 석출물을 갖는 무한 고체에정수압이 가해지는 경우에 대한 탄성-소성해 = An elasto-plastic solution for infinite solid containing a spherical precipitate under hydrostatic pressurelink 최병익; Choi, Byoung-Ik; et al, 한국과학기술원, 1980 |
19 | 그림자식 모아레를 이용한 PWB의 휨 측정에 관한 연구 = A study on the measurement of PWB warpage using shadow moirelink 이성민; Lee, Sung-Min; et al, 한국과학기술원, 2002 |
20 | 급속 열처리시 실리콘 웨이퍼에 발생하는 슬립 현상의 해석 = Analysis of thermal stress-induced slip in silicon wafer during rapid thermal processinglink 이혁; Lee, Hyouk; et al, 한국과학기술원, 1990 |
21 | 기계적 및 열적 하중을 받는 균열과 원형 개재물의 상호작용 = Interaction between a crack and a circular inclusion under remote stress and uniform heat flowlink 허민석; Huh, Min-Suk; et al, 한국과학기술원, 1999 |
22 | 나노 압입자를 이용한 박막/모재 구조의 계면파괴인성치 평가 = Evaluation of interfacial toughness of film/substrate by nanoindenterlink 서병국; Suh, Byung-Guk; et al, 한국과학기술원, 2004 |
23 | 동적 효과를 고려한 크레인 전도 안정성의 유한요소 해석 = Finite element analysis for overturning stability of telescopic crane including dynamic effectslink 이용우; Lee, Yong-Woo; 엄윤용; 임세영; et al, 한국과학기술원, 1996 |
24 | 두 개의 동심 원형 개재물을 가지는 삼종 재료에서의 특이성 = A singularity in a trimaterial with two concentric circular inclusionslink 이택균; Lee, Taek-Gyun; et al, 한국과학기술원, 2000 |
25 | 랜덤진동상황에서의 표면실장부품 소더범프에 대한 피로수명평가 = Fatigue life assessment of bump type solder joint under random vibration environmentlink 김태헌; Kim, Tae-Heon; 이순복; 엄윤용; et al, 한국과학기술원, 1998 |
26 | 리드프레임과 에폭시수지 사이의 계면파괴인성치 측정 = Measurement of interfacial toughness between lead frame and epoxy molding compoundlink 이경우; Lee, Kyung-Woo; et al, 한국과학기술원, 1994 |
27 | 마찰 및 마모에 대한 이온질화의 영향 = The effects of ion-nitriding on friction and wearlink 오희영; Oh, Hie-Young; et al, 한국과학기술원, 1984 |
28 | 모아레방법을 이용한 박막의 기계적 성질 측정에 관한 연구 = A study on measurement of mechanical properties of thin membrane using Moire methodlink 김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 1996 |
29 | 모우드 I 상태의 Tearing instability 에 관한 실험적 연구 = An experimental study on tearing instability under mode Ilink 최병일; Choi, Byung-Il; et al, 한국과학기술원, 1985 |
30 | 무한기지내의 개재물 경계에 있는 원호 균열에 대한 연구 = A study on arc crack along the interface of an inclusion embedded in an infinite matrixlink 배윤호; Bae, Yoon-Ho; et al, 한국과학기술원, 1990 |
31 | 미끄럼 마모에서의 균열문제 해석을 위한 탄소성 유한요소 프로그램 개발 = A development of elastoplastic finite element program for analysis of crack in sliding wearlink 구병춘; Goo, Byeong-Choon; et al, 한국과학기술원, 1989 |
32 | 변위제어를 이용한 리드프레임과 에폭시수지 사이의 계명파괴인성치 측정 = Measurement of interfacial fracture toughness between lead frame and epoxy by using a displacement control testlink 임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 1995 |
33 | 분위기 가스의 가압이 질화효과에 미치는 영향 = Influence of pressurizing of NH3 gas on nitriding effectlink 현봉섭; Hyun, Bong-Sup; 엄윤용; 곽병만; et al, 한국과학기술원, 1986 |
34 | 브리지 및 원형 멤브레인의 기계적 물성 및 계면파괴인성치 측정 = A measurement of mechanical properties and fracture toughness of bridged and circular membranelink 최우성; Choi, Woo-Sung; et al, 한국과학기술원, 2005 |
35 | 블리스터 방법을 이용한 박막의 탄성계수, 잔류응력 및 파단강도의 측정 = Measurement of elastic modulus, residual stress and rupture strength of thin film using blister testlink 함순식; Ham, Soon-Sik; et al, 한국과학기술원, 1995 |
36 | 비등방성 다층재료에서의 계면밑균열과 특이성해석 = Analysis of subinterface cracks and singularities in anisotropic multi-layered materialslink 성현수; Sung, Hyoun-Soo; et al, 한국과학기술원, 1998 |
37 | 소결금속의 링 압축에 관한 연구 = A study on the ring compression of porous metallink 문재호; Mun, Jae-Ho; 엄윤용; 오흥국; et al, 한국과학기술원, 1982 |
38 | 습기조건과 온도조건하에서 EMC의 파괴인성치 측정 = Measurement of fracture toughness of EMC under various moisture and temperature conditionslink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1996 |
39 | 실시간 모아레 측정을 이용한 소더조인트의 열피로 변형 해석에 관한 연구 = A study on the solder joint deformation analysis under thermal cycling by the real-time moire measurementlink 황태경; Hwang, Tae-Kyung; 엄윤용; 이순복; et al, 한국과학기술원, 1999 |
40 | 알루미늄 7039 합금의 Lowcycle 피로 = Low cycle fatigue of Al 7039link 강기주; Kang, Kee-Joo; et al, 한국과학기술원, 1983 |
41 | 얇은 막에 대한 열탄성 해석 = A thermo-elastic analysis of thin filmlink 김태완; Kim, Tae-Woan; et al, 한국과학기술원, 1989 |
42 | 연성 재료의 안정 균열 성장에 대한 연구 = A study on stable crack growth in ductile materiallink 문대흥; Moon, Dae-Heung; et al, 한국과학기술원, 1984 |
43 | 연성물질의 파괴 저항 곡선에 관한 연구 = A study on J-resistance curve for ductile materiallink 최영환; Choi, Young-Hwan; et al, 한국과학기술원, 1984 |
44 | 열하중이 있는 다층구조물에서의 계면균열해석 = Analysis of interfacial crack in multilayered medium under thermal loadinglink 박상선; Park, Sang-Sun; et al, 한국과학기술원, 1993 |
45 | 용접재의 피로수명에 미치는 용입상태의 영향에 관한 연구 = A study on the effect of penetration on fatigue life of weldmentlink 구자석; Koo, Ja-Suk; et al, 한국과학기술원, 1994 |
46 | 원통형 팁을 가진 나노 인덴터를 이용한 폴리디메틸실록산 박막의 점탄성 물성 측정 = A measurement of viscoelastic properties of polydimethylsiloxane(PDMS) film on Si substrate using nano indenter with flat-ended cylindrical tiplink 정수정; Jeong, Su-Jeong; et al, 한국과학기술원, 2005 |
47 | 원호계면균열을 갖는 섬유보강재의 유효탄성계수에 대한 연구 = A study on effective elastic moduli in fiber-reinforced composite with circular-arc shaped interfacial crackslink 문호정; Moon, Ho-Jeong; et al, 한국과학기술원, 1992 |
48 | 유한 요소법을 이용한 점탄성 재료의 응력 확대 계수의 계산 = Calculation of stress intensity factor in viscoelastic material using FEMlink 정일섭; Chung, Il-Sup; et al, 한국과학기술원, 1985 |
49 | 유한 크기의 압전 재료사이의 계면 균열에 대한 연구 = An interfacial crack in finite-sized piezoelectric materiallink 신효영; Shin, Hyo-Young; et al, 한국과학기술원, 2000 |
50 | 유한요소법에 의한 소규모 항복 조건하에서의 균열 성장에 관한 연구 = A study on crack growth under small scale yielding conditions by finite element methodlink 정진오; Jeong, Jin-O; et al, 한국과학기술원, 1983 |
51 | 유한요소법을 이용한 안정 및 불안정 균열성장에 대한 연구 = A study on stable and unstable crack growth using finite element methodlink 이형연; Lee, Hyeong-Yeon; 엄윤용; 윤용산; et al, 한국과학기술원, 1986 |
52 | 이동식 크레인 붐의 응력 해석 및 설계 = Stress analysis and design of a mobile crane boomlink 오성근; Oh, Seong-Guen; et al, 한국과학기술원, 1982 |
53 | 이온 질화가 피로 균열 발생과 성장에 미치는 영향 = The effect of ion-nitriding on fatigue crack initiation and growthlink 이상룡; Lee, Sang-Ryong; et al, 한국과학기술원, 1982 |
54 | 이온 질화된 고속도강의 마찰 및 마모 특성 = Friction and wear characteristics of ion-nitrided high speed steellink 황은하; Hwang, Eun-Ha; et al, 한국과학기술원, 1982 |
55 | 이온질화 후 급냉이 강의 피로에 미치는 영향 = Effects of rapid cooling after ion-nitriding on fatigue properties of steelslink 윤경구; Yoon, Kyoung-Ku; et al, 한국과학기술원, 1983 |
56 | 이온질화 후 급냉이 피로 균열 발생과 성장에 미치는 영향 = Effect of rapid cooling after ion-nitriding on fatigue crack initiation and growthlink 염대준; Yeom, Dae-Joon; et al, 한국과학기술원, 1984 |
57 | 이온질화된 A131-B 강의 마모 = Wear of ion-nitrided A131-B steellink 박순조; Park, Soon-Jo; et al, 한국과학기술원, 1985 |
58 | 이온질화된 SKT-4 강의 마모에 대한 합성층의 영향 = Effect of compound layer on wear of ion-nitrided SKT-4 steellink 이병옥; Rhee, Byung-Ohk; et al, 한국과학기술원, 1983 |
59 | 이온질화에 의한 잔류 응력이 강의 피로에 미치는 영향 = Influence of residual stress on fatigue properties of ion-nitrided steelslink 김종한; Kim, Jong-Han; 엄윤용; 송지호; et al, 한국과학기술원, 1986 |
60 | 이온질화한 강의 잔류응력 분포에 관한 연구 = A study on residual stress distribution in ion nitrided steellink 박상진; Park, Sang-Jin; 엄윤용; 곽병만; et al, 한국과학기술원, 1986 |