1833 | 파동 벡터 필터링 및 비유일성 제거에 의한 시간 영역 음향 경계 요소법의 안정화 = Stabilization of time-domain acoustic boundary element method by wave vector filtering and non-uniqueness removallink 장해원; Jang, Hae-Won; et al, 한국과학기술원, 2012 |
1834 | 파동전파 특성을 이용한 관내 평균유속 측정방법 = A measurement method of the mean flow velocity in pipe using wave propagation characteristicslink 김용범; Kim, Yong-Beum; et al, 한국과학기술원, 2003 |
1835 | 파라메트릭 CAD 모델 교환을 위한 고유 명칭과 매핑 방법 = Persistent naming and its mapping for parametric CAD model exchangeslink 문두환; Mun, Du-Hwan; et al, 한국과학기술원, 2006 |
1836 | 파라메트릭 조립체 CAD 모델의 교환을 위한 중립 스키마 = (A) schema for the exchange of parametric CAD models with assemblieslink 김영기; 한순흥; et al, 한국과학기술원, 2020 |
1837 | 파워 흐름 해석법을 이용한 벨트-풀리계의 진동 파워 전달의 파악 = Identification of vibrational power transmission in belt-pulley systems by using the power flow methodlink Kwon, Young-Ill; 권영일; et al, 한국과학기술원, 1998 |
1838 | 파일롯화염에 의해 고정된 희박 층류 예혼합화염에 대한 실험적 연구 = Experimental study on the pilot flame anchored lean laminar premixed flamelink 박부민; Park, Poo-Min; et al, 한국과학기술원, 2001 |
1839 | 파형벽면의 관내에서의 유동 및 열전달 특성 = Flow and heat transfer characteristics in ducts with wavy wallslink 조기주; Cho, Kie-Joo; et al, 한국과학기술원, 1999 |
1840 | 판형 구조물에 가상 스피커 및 배플을 형성하기 위한 진동 음향 역문제 기법 = Vibro-acoustic inverse technique to create a virtual speaker and baffle on a platelink 우정한; 이정권; et al, 한국과학기술원, 2018 |
1841 | 팽창 경사면 주위에서 충격파와 경계층 상호작용에 대한 수치해석 연구 = Numerical investigation of oblique-shock-wave/boundary-layer interaction near expansion cornerlink 오성환; Oh, Seong-Hwan; et al, 한국과학기술원, 1999 |
1842 | 퍼지기반 센서 융합을 이용한 이동용 로봇 제어 = Mobile robot navigation using fuzzy based sensor fusionlink 이왕헌; Lee, Wang-Heon; et al, 한국과학기술원, 2001 |
1843 | 펄라이트 강선의 기계적 특성 향상을 위한 비원형 신선 공정 설계 = Process design of a non-circular drawing sequence for improving mechanical properties of pearlitic steel wireslink 백현무; Baek, Hyun Moo; et al, 한국과학기술원, 2015 |
1844 | 펄스 콘젯 모드를 이용한 전기수력학적 드랍온디맨드 패터닝 = Electrohydrodynamic drop-on-demand patterning in the pulsed cone-jet modelink 김중혁; Kim, Joong-Hyuk; et al, 한국과학기술원, 2008 |
1845 | 페이로드 증대를 위한 강인한 관절 구조 및 이를 적용한 유연 내시경 수술 로봇 = Surgical joint with enhanced payload capability with its application to flexible endoscopic surgery robotlink 황민호; Hwang, Minho; et al, 한국과학기술원, 2017 |
1846 | 펨토초 광원의 초정밀 타이밍 분배 및 동기화 : 극초단 전자 펄스의 시안정도 향상 및 자유공간 광 경로의 안정화 = Expanding the boundary of high-precision optical timing transfer : from ultrafast electron generation to free-space optical beam pathlink 신준호; 김정원; et al, 한국과학기술원, 2020 |
1847 | 펨토초 레이저 직접묘화 기반 목질계 재료상 레이저-유도-그래핀 생성 및 응용 = Femtosecond laser direct writing based laser-induced-graphene formation on lignocellulosic materials and applicationslink 남한구; Nam, Han Ku; et al, 한국과학기술원, 2023 |
1848 | 펨토초 레이저 펄스의 비행시간법을 이용한 다자유도 절대 거리 측정 = Multi-degree of freedom distance measurement by time-of-flight of femtosecond light pulseslink 한성흠; Han, Seongheum; et al, 한국과학기술원, 2016 |
1849 | 펨토초 레이저를 이용한 고분해능 LIDAR 기술 = High resolution lidar system with a femtosecond pulse laserlink 이주형; Lee, Joo-Hyung; et al, 한국과학기술원, 2011 |
1850 | 펨토초 레이저를 이용한 대영역 저결맞음 간섭계 = Low-coherence interferometry using femtosecond lasers for large-scale profilometrylink 오정석; Oh, Jeong-Seok; et al, 한국과학기술원, 2005 |
1851 | 펨토초 레이저를 이용한 정밀거리측정을 위한 분산 보상 제어에 관한 연구 = Dispersion compensation control for precision distance measurement using femtosecond laserlink 이상현; Lee, Sang-Hyun; et al, 한국과학기술원, 2011 |
1852 | 펨토초 레이저의 반복률 안정화와 초저잡음 마이크로파 신호의 생성 및 전송 = Repetition rate stabilization of femtosecond lasers and ultra-low phase noise microwave generation and transferlink 정광연; Jung, Kwangyun; et al, 한국과학기술원, 2016 |
1853 | 펨토초 레이저의 주파수 모드를 이용한 게이지 블록의 정밀 길이 측정 = Precision length metrology of gauge blocks using the optical comb of a femtosecond pulse laserlink 진종한; Jin, Jong-Han; et al, 한국과학기술원, 2006 |
1854 | 펨토초 펄스 레이저에 의해서 생성된 균열 전파를 이용한 화학 강화 글래스의 절단 = Cutting of chemically strengthened glass using crack propagation generated by femtosecond pulse laserlink 박상욱; Park, Sanguk; et al, 한국과학기술원, 2017 |
1855 | 편광유지 광섬유 기반 고안정도, 저잡음 모드 잠금 광섬유 레이저 = Robust and low-noise polarization-maintaining mode-locked fiber laserslink 김도현; 김정원; et al, 한국과학기술원, 2020 |
1856 | 평면 XY 스테이지의 2D 오차 평가 및 개선 = Evaluation and enhancement for 2D error of planar XY stagelink 황주호; Hwang, Joo-Ho; et al, 한국과학기술원, 2006 |
1857 | 평면 기구의 열거와 형태 합성에 관한 연구 = Study on enumeration and type synthesis of planar mechanismslink 김정태; Kim, Jeong-Tae; et al, 한국과학기술원, 1991 |
1858 | 평면 벽 근방의 판의 진동에 의한 3차원의 비정상 느린 점성 유동 = 3-dimensional unsteady stokes flow due to an oscillating plate near plane walllink 추정호; Chu, Jeong-Ho; et al, 한국과학기술원, 2002 |
1859 | 평면기구의 회전연결부에서의 간극효과를 고려한동적해석 및 설계 = Dynamic analysis and design of planar mechanisms with clearances at revolute jointslink 신재균; Shin, Jae-Kyun; et al, 한국과학기술원, 1985 |
1860 | 평면벽 근방의 평판에 작용하는 유체역학적 힘 : MEMS의 해석 및 응용 = Hydrodynamic force on a plate near the plane wall : analysis of MEMS and its applicationslink 김기운; Kim, Ki-Woon; et al, 한국과학기술원, 2003 |
1861 | 평면변형률 상태 하에서 유한요소법을 이용한 균열닫힘거동 예측에 관한 연구 = Finite element analysis of fatigue crack closure under plane strain statelink 이학주; Lee, Hak-Joo; et al, 한국과학기술원, 2003 |
1862 | 평판 디스플레이용 복합재료 로봇구조의 설계 및 제조에 관한 연구 = Design and manufacture of the composite robot structure for manipulating large glass panels for flat panel displaylink 오제훈; Oh, Je-Hoon; et al, 한국과학기술원, 2001 |
1863 | 평판에 횡방향으로 놓인 사각형 그루브를 갖는 물체의 강제대류에 관한 실험 및 수치적 연구 = Experimental and numerical study on forced convection from plates with transverse rectangular grooveslink 이상종; Lee, Sang-Jong; et al, 한국과학기술원, 2000 |
1864 | 평판형 광파 회로 기반 저잡음, 고안정도 펨토초 레이저 = Robust and low-noise femtosecond lasers based on planar lightwave circuit deviceslink 김철; Kim, Chur; et al, 한국과학기술원, 2017 |
1865 | 평행광 엑스선 토모그라피의 설계와 오차분석에 관한 연구 = Design and Error Analysis of Parallel-Beam X-ray Tomographylink 강성훈; Kang, Sung-Hoon; et al, 한국과학기술원, 2011 |
1866 | 평활화 유한 요소법을 이용한 미분장 근사와 요소 개발에의 응용 = Differential field approximation using the smoothed finite element method and its application to development of finite elementslink 최재훈; 이병채; et al, 한국과학기술원, 2019 |
1867 | 폐플라스틱 선별 로봇의 흡착 위치 선정과 고속이송궤적 생성 알고리즘 연구 = Study of suction location decision and rapid manipulation trajectory generation algorithm for plastic waste sorting robotlink 엄상우; 김경수; Kim, Kyung-soo; 김수현; et al, 한국과학기술원, 2022 |
1868 | 포화 구동기를 갖는 해상 크레인의 위치 제어 전략 = Position control strategy for an offshore crane with actuator saturationlink 김동호; Kim, Dongho; et al, 한국과학기술원, 2016 |
1869 | 폴리머 기판에 전사된 다층 그래핀의 전기-기계적 거동 = Electromechanical behavior of multilayer graphene on polymer substratelink 원세정; Won, Sejeong; et al, 한국과학기술원, 2015 |
1870 | 폴리머 초소형 노즐 어레이를 이용한 물 정전분무 그리고 응용 = Electrospray of water with polymer micro nozzle arrays and its applicationslink 정지훈; 이승섭; et al, 한국과학기술원, 2020 |
1871 | 표면 텍스처링 된 인공 고관절 재료의 마찰/마모 특성에 대한 연구 = (A) study on friction and wear characteristics of surface-textured hip implant materialslink 이현화; 양민양; et al, 한국과학기술원, 2018 |
1872 | 표면근전도 신호를 이용한 손가락들의 텐던 힘 추정 연구 = A study on estimating tendon forces of fingers using surface EMG signalslink 김평강; Kim, Pyungkang; et al, 한국과학기술원, 2017 |
1873 | 표면및 균열문제의 유한요소해석 = Finite element analysis of subsurface crack problemslink 이경식; Lee, Kyung-Sick; et al, 한국과학기술원, 1992 |
1874 | 표면실장기술에서 솔더 접합부 형상 해석 및 설계 응용 = Analysis of solder joint profile and application to design in SMTlink 최동필; Choi, Tong-Pil; et al, 한국과학기술원, 1999 |
1875 | 표준 길이 측정 원자현미경 용 나노 정밀도 스캐너의 설계 및 자가 보정을 통한 계통오차 보정 = The design of nano scanner and the calibration of systematic error using self-calibration for standard length measuring AFM(Atomic Force Microscope)link 김동민; Kim, Dong-Min; et al, 한국과학기술원, 2007 |
1876 | 프로팅링 저어널베어링에 대한 연구 = A Study on the floating ring journal bearinglink 정연민; Cheong, Yeon-Min; et al, 한국과학기술원, 1992 |
1877 | 플라즈마 디스플레이 패널(PDP)의 비접촉식 형광막 프린팅 공정에 관한 연구 = (A) study on non-contact printing process for phosphor layer deposition of PDPlink 이재학; Lee, Jae-Hak; et al, 한국과학기술원, 2009 |
1878 | 플라즈마 스프레이 프로세스를 고려한 열차폐 시스템의 유한요소 해석 = Finite element analysis of a thermal barrier coating system with plasma spraying processlink 이명재; Lee, Myung Jae; et al, 한국과학기술원, 2016 |
1879 | 플라즈몬 공명 현상을 이용한 극자외선(EUV)영역의 고차조화파 생성 = High harmonic generation in the range of EUV light by resonant plasmon field enhancementlink 김승철; Kim, Seung-Chul; et al, 한국과학기술원, 2009 |
1880 | 플랜지를 갖는 축류형 부품의 점진적인 반경-축방향 복합단조 공정개발에 관한 연구 = Study on incremental radial-axial forging of flanged shaft partslink 이경훈; Lee, Kyung-Hoon; et al, 한국과학기술원, 2003 |
1881 | 플립칩 본딩에서 무연 솔더의 종방향 열초음파 솔더링에 관한 연구 = A study on longitudinal thermosonic soldering of lead free solder for flip chip bondinglink 이지혜; Lee, Ji-Hye; et al, 한국과학기술원, 2005 |
1882 | 피동 적응형 기구적 특성의 계단등반 주행로봇의 개발 = Development of stair-climbing mobile robot with passively adaptable kinematic characteristiclink 우춘규; Woo, Chun-Kyu; et al, 한국과학기술원, 2007 |
1883 | 피로강도평가의 전산화 : 피로강도 데이타베이스 및 피로 전문가 시스템 구축 = Computerization of fatigue strength assessment : Implementation of fatigue strength database and fatigue expert systemlink 박준협; Park, Jun-Hyub; et al, 한국과학기술원, 1995 |
1884 | 피로균열열림점 결정방법에 관한 연구 = A study on determination-methods of fatigue crack opening levellink 구자석; Koo, Ja-suk; et al, 한국과학기술원, 2002 |
1885 | 피로균열열림하중 결정방법 및 유효응력강도계수폭 평가법에 관한 검토 = Evaluations of fatigue crack opening load determination and effective stress intensity factor range estimation methodslink 정연일; Chung, Youn-Il; et al, 한국과학기술원, 2009 |
1886 | 필릿용접의 해석적 모델 과 실시간 모니터링을 위한 초음파 측정장치 = An analytical modeling of fillet arc welding and ultrasonic detector for real-time monitoringlink 정선국; Jeong, Seon-Kook; et al, 한국과학기술원, 1997 |
1887 | 하모닉 드라이브용 복합재료 플렉스플라인에 관한 연구 : 설계, 제조 및 평가 = A study on the composite flexspline for a harmonic drive : design, manufacturing and evaluationlink 정광섭; Jeong, Kwang-Seop; et al, 한국과학기술원, 1995 |
1888 | 하모닉 웨이블렛 변환을 이용한 비정상상태 진동파워의 시간-주파수 해석 = Time-frequency analysis of non-stationary vibration power by harmonic wavelet transformlink 허용화; Heo, Yong Hwa; et al, 한국과학기술원, 2015 |
1889 | 하이드라진 추력기 성능에 관한 실험 및 수치적 연구 = Experimantal and numerical study for hydrazine thruster performancelink 한동인; Han, Dong-In; et al, 한국과학기술원, 2010 |
1890 | 하이드로포밍 공정에 있어서 신경회로망을 이용한 성형압력 추정에 관한 연구 = Estimation of forming pressure for hydroforming processes using a neural networklink 현봉섭; Hyun, Bong-Sup; et al, 한국과학기술원, 1993 |
1891 | 하이브리드 구동 이족 로봇을 위한 제약 조건이 낮은 보행 알고리즘 = Under-constrained walking algorithm for hybrid actuated biped robotlink 김동현; Kim, Donghyun; 김경수; et al, 한국과학기술원, 2022 |
1892 | 하이브리드 방식을 이용한 고효율, 고품위 공구경로생성 = Tool path generation using a hybrid method for high performance and high quality machininglink 이성근; Lee, Sung-Gun; et al, 한국과학기술원, 2007 |