1961 | Cu 확산 방지용 TiN의 stuffing 효과에 관한 연구 = A study on the effect of TiN stuffing for Cu diffusion barrierlink 황용섭; Hwang, Yong-Sup; et al, 한국과학기술원, 1998 |
1962 | $(1-x)Pb(Yb_{1/2}Nb_{1/2})O_3 - xPb(Mg_{1/2}W_{1/2})O_3$ 고용계에서의 유전특성 및 상전이 거동에 관한 연구 = A study on the dielectric properties and the phase transition of $(1-x)Pb(Yb_{1/2}Nb_{1/2})O_3 - xPb(Mg_{1/2}W_{1/2})O_3$ pseudobinary systemlink 한호수; Han, Ho-Su; et al, 한국과학기술원, 1998 |
1963 | Ti-미량 첨가강에서 냉각속도가 석출 및 오스테나이트 결정립 성장거동에 미치는 영향 = Effect of the cooling rate on the precipitation and austenite grain growth behavior in Ti-microalloyed steellink 추정근; Chu, Jeong-Keun; et al, 한국과학기술원, 1998 |
1964 | EMF 측정을 이용한 $BaThO_3$의 열역학적 안정성 연구 = The thermodynamic study of $BaThO_3$ using EMF methodlink 최성호; Choi, Sung-Ho; et al, 한국과학기술원, 1998 |
1965 | Si 기판위에 Hot filmanent CVD법으로 제조된 다이아몬드 박막의 응력 해석 = Stress analysis in diamond thin films on Si wafer deposited by hot filament chemical vapor depositionlink 차승일; Cha, Seung-Il; et al, 한국과학기술원, 1998 |
1966 | 합금원소(Cr, Mo, W, Ni)가 페라이트 스테인리스강의 재부동태 거동에 미치는 영향 = Effects of alloying elements(Cr, Mo, W, Ni) on repassivation kinetics of ferritic stainless steelslink 조은애; Cho, Eun-Ae; et al, 한국과학기술원, 1998 |
1967 | 일방향응고 TiAl 합금의 조성, 성장속도 및 β안정화원소 첨가가 층상경계방위분포에 미치는 효과 = Effects of composition, growth rate and β stabilizer on the lamellar orientation distribution of directionally-solidified TiAl alloyslink 정인수; Jung, In-Soo; et al, 한국과학기술원, 1998 |
1968 | 마이크로 머신 소자(MEMS) 패키지의 열응력에 대한 연구 = A study on the thermo-mechanical stress of MEMS device packageslink 전우석; Jeon, Woo-Seok; et al, 한국과학기술원, 1998 |
1969 | 전해도금법을 이용한 공정 납-주석 플립칩 솔더범프와 UBM(Under Bump Metallurgy)계면에 관한 연구 = Interfacial studies on the electroplated eutectic Pb/Sn flip-chip solder bump and UBM(Under Bump Metallurgy)link 장세영; Jang, Se-Young; et al, 한국과학기술원, 1998 |
1970 | Ni/MH 2차전지용 다상의 Zr계 수소저장합금 전극의 활성화 특성에 관한 연구 = A study on the activation characteristics of multi-phase Zr-based hydrogen storage alloy for Ni/MH rechargeable batterylink 이호; Lee, Ho; et al, 한국과학기술원, 1998 |
1971 | PZT박막의 건조온도에 따른 전광계수의 측정 및 분석 = Measurement and analysis of the electro-optic coefficient with drying temperature in PZT thin filmslink 이창호; Lee, Chang-Ho; et al, 한국과학기술원, 1998 |
1972 | Ti-6Zr-6Nb-6Sn 합금의 고온 변형 거동에 관한 연구 = Study on high temperature deformation behavior of Ti-6Zr-6Nb-6Sn alloylink 오민석; O, Min-Seok; et al, 한국과학기술원, 1998 |
1973 | $(CdC1_2+CdS)$ 분위기를 이용한 CdS 막의 열처리 효과에 관한 연구 = A study on the effect of heat treatment of CdS films in $(CdC1_2+CdS)$ atmospherelink 안진형; Ahn, Jin-Hyung; et al, 한국과학기술원, 1998 |
1974 | Cycle-CVD법을 이용한 tantalum oxide 원자층 단위 증착 및 특성에 관한 연구 = A study on atomic layer deposition and film characteristics of tantalum oxide using cycle-CVDlink 송현정; Song, Hyun-Jung; et al, 한국과학기술원, 1998 |
1975 | Hot filament 방법에 의한 다이아몬드와 흑연의 식각 양상 = Ethching behavior of diamond and graphite in hot filament CVDlink 서창의; Seo, Chang-Eui; et al, 한국과학기술원, 1998 |
1976 | 오스테나이트계 스테인리스강의 열역학적 평형 및 확산응고경로에 관한 고찰 = Thermodynamic equilibrium and diffusional solidification path in austenitic stainless steellink 배준수; Bae, Jun-Soo; et al, 한국과학기술원, 1998 |
1977 | In-situ radio-frequency 세정에 의한 $TiSi_2$ 연구 = A study of $TiSi_2$ formation by in-situ radio-frequency cleaninglink 배종욱; Bae, Jong-Uk; et al, 한국과학기술원, 1998 |
1978 | (A) study on the effect of bicarbonate ion addition on the pitting corrosion of 316L stainless steel in aqueous $(Cl^-)$ ion-containing solutions = 염화 이온$(Cl^-)$ 함유 수용액에서 316L 스테인레스 강의 공식특성에 미치는 바이카카보네이트 이온$(HCO_3^-)$의 영향에 대한 연구link Park, Jin-Ju; 박진주; et al, 한국과학기술원, 1998 |
1979 | 금속간화합물 TiAl의 고온산화거동 및 기계적성질에 미치는 Yttrium 첨가 $L1_2 (Al,Cr)_3Ti$ 코팅의 효과 = Effects of Y-doped $L1_2 (Al,Cr)_3Ti$ coatings on high-temperature oxidation behavior and mechanical properties of TiAl intermetallic compoundslink 박진민; Park, Zin-Min; et al, 한국과학기술원, 1998 |
1980 | DC magnetron sputtering법을 이용한 Ir 하부전극의 형성 및 특성평가와 $(Ba,Sr)TiO_3$ 박막의 특성 평가 = Preparation and characterization of iridium bottom electrode by DC magnetron sputtering and characterization of $(Ba,Sr)TiO_3$ thin filmlink 박정호; Park, Jeong-Ho; et al, 한국과학기술원, 1998 |