1001 | 비가수 솔-젤법에 의한 저굴절률 메타크릴-실리케이트 하이브리머 재료의 제조 및 특성 = Synthesis and characterization of low refractive index methacryl-silicate HYBRIMER by non-hydrolytic sol-gel processlink 남금희; Nam, Keum-Hee; et al, 한국과학기술원, 2005 |
1002 | 리튬이 삽입된 Ti 유화물과 산화물의 전자 상태 계산 = Theoretical study of lithium intercalation in titanium sulfides and titanium oxideslink 김희진; Kim, Hee-Jin; et al, 한국과학기술원, 2005 |
1003 | DC 마그네트론 스퍼터링 방법으로 증착한 $Ge_2Sb_2Te_5$ 박막의 결정화 거동 및 전기적 특성 평가 = The estimation of the crystalline behavior and electrical property of nominal-composition $Ge_2Sb_2Te_5$ thin films prepared by dc-magnetron sputteringlink 김현정; Kim, Hyun-Jung; et al, 한국과학기술원, 2005 |
1004 | Mn과 Cr이 A356합금의 미세구조와 기계적 성질에 미치는 영향에 대한 연구 = The effects of Mn and Cr on the microstructures and mechanical properties of A356 alloylink 김현유; Kim, Hyun-You; et al, 한국과학기술원, 2005 |
1005 | SiAlON 세라믹의 조성변화가 마이크로파 유전특성에 미치는 영향 = Effect of composition of SiAlON ceramics on microwave dielectric propertieslink 김하늘; Kim, Ha-Neul; et al, 한국과학기술원, 2005 |
1006 | UV 파장에 따른 Ge 첨가 하이브리머의 광민감성 변화 = Change in photosensitivity of ge-doped HYBRIMER depending on UV wavelengthlink 김진기; Kim, Jin-Ki; et al, 한국과학기술원, 2005 |
1007 | 실리카 나노입자 분산 HYBRIMER 의 제조 및 평가 = Fabrication and characterization of silica nano particle dispersed HYBRIMERlink 김정환; Kim, Jeong-Hwan; et al, 한국과학기술원, 2005 |
1008 | $(1-x)Pb(Yb_{1/2}Nb_{1/2})O_3-xPbTiO_3$ 고용계에서 MPB의 열역학적 모델링과 상전이 거동에 대한 분석 = Thermodynamic modelling and phase transition behavior analysis of MPB in $(1-x)Pb(Yb_{1/2}Nb_{1/2})O_3-xPbTiO_3$ solid solutionlink 김정현; Kim, Jung-Hyun; et al, 한국과학기술원, 2005 |
1009 | UBM용 Ni 박막 형성 및 특성에 관한 연구 = Fabrication and characterization of the Ni films for the Applications to UBMlink 김응도; Kim, Eung-Do; et al, 한국과학기술원, 2005 |
1010 | Cu 기판을 이용한 YBCO 초전도체 제조에서의 CuO 생성 제어 = CuO formation control in Cu-free synthesis of screen-printed YBCO superconductor on Cu plateslink 김영하; Kim, Young-Ha; et al, 한국과학기술원, 2005 |
1011 | 공정 80Au-20Sn 솔더 합금과 Under Bump Metallurgy(UBM)의 계면 현상 및 계면 생성물의 성장거동에 대한 연구 = Studies on interfacial reaction and microstructural evolution of joint interface between eutectic 80Au-20Sn solder alloy and under bump metallurgylink 김성수; Kim, Sung-Soo; et al, 한국과학기술원, 2005 |
1012 | RF magnetron sputtering 법을 이용한 Ag 가 첨가된 $Ge_2Sb_2Te_5$ 박막의 형성 및 특성평가 = Preparation and characterization of Ag added $Ge_2Sb_2Te_5$ thin film by RF magnetron sputteringlink 김동훈; Kim, Dong-hun; et al, 한국과학기술원, 2005 |
1013 | Mechanical properties and deformation mechanism of nanoscale Ag/Ni multilayers = Ag/Ni 나노다층박막의 기계적 물성 및 변형기구link 강봉철; Kang, Bong-Cheol; et al, 한국과학기술원, 2005 |
1014 | Fabrication and field emission properties of carbon nanotube implanted metal aanocomposite = 탄소나노튜브/금속 나노복합재료의 제조 및 전계방출 특성link Arshad, Salman Noshear; 알샤드, 살만 노쉐얼; et al, 한국과학기술원, 2005 |
1015 | Si 및 C이 첨가된 TiAl-Nb 합금의 열적안정성 및 기계적성질 = Thermal stability and mechanical properties of TiAl-Nb alloys containing Si and Clink 김정환; Kim, Jung-Hwan; et al, 한국과학기술원, 2004 |
1016 | 전자 패키징용 Au 본딩와이어의 재결정 현상과 기계적 특성 = Recrystallization behavior and mechanical properties of gold bonding wire for electronic package applicationslink 송지영; Song, Ji-Young; et al, 한국과학기술원, 2004 |
1017 | Sn-(0.7Cu)-x 솔더 조인트의 크리프 특성 (x = Bi, Sb, Zn, 그리고 In)link 김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2004 |
1018 | 티타늄의 수소 흡수와 구리 전착에 미치는 양극 산화의 영향 = Effects of anodic oxidation on the hydrogen absorption into Ti and its influence on electrodeposition of Culink 정준호; Jung, Jun-Ho; et al, 한국과학기술원, 2004 |
1019 | $BaTiO_3$ 계에서 전위가 단결정 성장에 미치는 영향 = Effect of dislocation on single crystal growth in $BaTiO_3$link 이민곤; Lee, Min-Gon; et al, 한국과학기술원, 2004 |
1020 | 전도성 페로브스카이트 $CaRuO_3$ 박막의 제조와 특성 분석 = Fabrication and characterization of conductive Perovskite $CaRuO_3$ thin filmslink 백한종; Paik, Han-Jong; et al, 한국과학기술원, 2004 |