170 | K 배상민; 석현정; 남택진; 배충식 |
171 | KARE KOREA AID for RESPIRATORY EPIDEMIC 배상민; 석현정; 남택진; 배충식 |
172 | Konfokales Echtzeitmikroskop mit Dispersionsoptik Gweon, Dae-Gab; Kang, Dong Kyun |
173 | Kugelgelenk zum Zusammenkuppeln von drei oder mehr Verbindungsgliedern an einem Punkt Kwon, Dong-Soo; Song, Se Kyong; Kim, Wan Soo |
174 | Laptop-size high-order harmonic generation apparatus using near field enhancement Kim, Seung-Woo; Jin, Jong-Han; Kim, Seung-Chul; Park, In-Yong |
175 | LIQUID TIGHT SEALING OF HEAT-INSULATING WALLS OF A LIQUEFIED NATURAL GAS CARRIER Lee, Dai Gil; Park, Sang Wook; Kim, Byung Chul; Kim, Seong Su, 2012-11-27 |
176 | LOHC 탈수소화 반응기 용 촉매구조체 배중면; 이재명; 한광우; 이상훈; 김태홍 |
177 | Manipulator with distributed actuation mechanism Kim, Kyung-Soo; Shin, YoungJune |
178 | Manufacturing method of anode for solid oxide fuel cell Bae, Joongmyeon; Baek, Seung-Wook |
179 | Measurement system of three-dimensional shape of transparent 김수현, 2005-06-23 |
180 | Membraneless micro fuel cell Sung, Hyung Jin; Yoon, Sang-Youl; Dewan Hasan Ahmed; Park, Hong-Beom, 2011-12-21 |
181 | Membraneless micro fuel cell Sung, Hyung Jin; Yoon, Sang Youl; Ahmed Dewan Hasan; Park, Hong Beom |
182 | Metal jacket for a cementless artificial joint stem and artificial joint having the jacket 윤용산, 2002-12-24 |
183 | METAL-SUPPORTED SOLID OXIDE FUEL CELL AND MANUFACTURING METHOD THEREOF Bae, Joongmyeon; Baek, Seung-Wook; Lee, Changbo; Bae, Gyujong; Jeong, Jaehwa; Kim, Yu-Mi, 2012-10-16 |
184 | Method and apparatus for biometric authentication based on vibration signal Park, Yong-Hwa; Yoo, Hyewon |
185 | Method and apparatus for determining phase sensitivity of an accelerometer based on an analysis of the harmonic components of the interference signal Lee, Yong Bong; Jung, Sung Soo; Kim, Seung-Woo, 2014-07-08 |
186 | Method and apparatus for manufacturing metal separator for fuel cell 양동열; 김세훈; 류승민; 양유창; 진상문; 조남영, 2012-08-14 |
187 | Method and apparatus for real-time estimation of full parameters of permanent magnet synchronous motor Kim, Kyung-Soo; Choi, Kyunghwan; Kim, Seok Kyoon |
188 | Method and device for controlling MRI noise Lee, Gun-woo; Lee, Nokhaeng; Ko, Sang-chul; Park, Young-Jin |
189 | METHOD AND DEVICE FOR REPRODUCING THREE-DIMENSIONAL SOUND 박영진; 조현; 김선민, 2019-07-16 |
190 | Method and device used for manufacturing microchannel surface plate using wave shaped mould Lee, Dai Gil; Kim, Po-Chin; Lee, Hak Gu |
191 | Method and system for controlling power of fuel cell vehicle 박영진; 한지훈; 유성필; 이규일; 최서호; 권상욱, 2016-01-19 |
192 | Method for coating thin film in rolling manner and apparatus for coating thin film by using the same Kim, Taek-Soo; Kang, Sumin |
193 | Method for fabricating a spindle or roller employing a composite material Lee, Dai Gil; Kim, Hyun-Surk; Kim, Young-Goo; Choi, Jin-Kyung; Cheon, Seong-Sik; Cho, Durk-Hyun |
194 | Method for generating a stereographic image Han, Soonhung; Yoo, Boyoung Hyun |
195 | Method for Generating an Idea Cementing Trajectory and an Actual Cementing Operation Trajectory 권동수, 2007-06-12 |
196 | Method for generating stereographic image using Z-buffer Han, Soonhung; Yoo, Byoung Hyun |
197 | Method for generation of a ideal cementing trajectoryand a cementing operation trajectory Kwon, Dong-Soo; Song, Sekyung; Ko, Sungyoung; Huh, Hoon; Sung, Nakwon; Kim, Yongjin |
198 | Method for manufacturing a three-dimensional model by variable deposition and apparatus used therein 양동열; 신보성; 정준호, 2003-01-07 |
199 | Method for manufacturing composite separator for fuel cell and composite separator manufactured by the same 이대길; 유하나; 김병철; 김부기; 임준우; 서정도; 안병기; et al, 2014-08-12 |
200 | METHOD FOR MANUFACTURING NANOSTRUCTURE AND NANOSTRUCTURE MANUFACTURED BY THE SAME Ko Seung Hwan; Park Inkyu |
201 | Method for measuring a thickness profile and a refractive index using white-light scanning interferometry and recording medium therefor 김승우; 김기홍, 2003-04-08 |
202 | Method for measuring and suppressing repetition rate phase noise of femtosecond laser using optical fiber delay line Kim, Jungwon; Jung, Kwang Yun, 2018-12-18 |
203 | Method for optimally determining sensor positions for acoustic pyrometry Ih, Jeong-Guon; Park, Chul Min |
204 | METHOD FOR PERFORMING OCT IMAGING WHILE AVOIDING SYSTOLE, AND DEVICES FOR PERFORMING SAME 오왕열; 박현상; 김대식; 장선주; 조한샘 |
205 | Method for producing hybrid driveshaft 이대길, 2002-01-08 |
206 | Method For Separating And Washing Of Microparticles Via A Stratified Coflow Of Non-Newtonian And Newtonian Fluids 성형진; 하병항, 2018-05-18 |
207 | Method for separating and washing of microparticles via a stratified coflow of non-Newtonian and Newtonian fluids Sung, Hyung Jin; Ha, Byung-Hang |
208 | Method of constructing surface element layers of hexahedral mesh for finite element analysis and method of constructing hexahedral mesh using the same 양동열, 2003-06-03 |
209 | Method of encoding and decoding haptic information, and apparatus for processing haptic information 권동수; 김승찬; 경기욱; 박준석, 2013-07-10 |
210 | Method of manufacturing non-sintered liquid metal ink Kim, Hyoungsoo; Park, Kwangseok; Pyeon, Jeongsu; Jun, Hyejoon |
211 | Method of measuring shear friction factor through backward extrusion process 임용택; 천재승; 김수영; 이근안; 강성훈, 2002-07-16 |
212 | Method of visualizing sound fields of individual sound sources using acoustic holography Kim, Yang-Hann; Nam, Kyoung Uk |
213 | Microgyroscope with vibratory structure having a multitude of grooves Cho, Young-ho; Park, Kyu-yeon; Lee, Chong-won; Song, Ci-moo, 1998-05-19 |
214 | MODULE FOR DETECTING A VEHICLE CRASH AND AN AIRBAG DEPLOYING SYSTEM INCLUDING THE SAME 허훈; 조상순, 2012-11-07 |
215 | Module for detecting a vehicle crash and an airbag deploying system including the same 허훈, 2012-01-24 |
216 | Module for detecting a vehicle crash and an airbag deploying sytem including the same Huh, Hoon; Cho, Sang Soon |
217 | Module for detecting a vehicle crash and an airbag deploying sytem including the same Huh, Hoon; Cho, Sang Soon |
218 | Mold for manufacturing a food packaging material having uniform coating of oil Lee, Seung-Seob; Jo, Kyoung Sik; Park, Min Young; Lee, Sang Eon; Lee, Seung Seob, 2018-10-23 |
219 | MOORING SYSTEM FOR A VESSEL Lee, PhillSeung; Han, Soonhung; Chung, Hyun; Kim, Yong Yook; Choi, Kook Jin; Kim,Sang-Il; Cho,Young-Hee; et al, 2013-08-06 |
220 | MOORING SYSTEM FOR A VESSEL AND FLATING STRUCTURE, MOBILE HARBOR AND QUAY USING IT 이필승; 한순흥; 정현; 김용욱; 최국진; 김상일; 조영희; et al, 2014-12-10 |
221 | MOORING SYSTEM FOR A VESSEL AND FLATING STRUCTURE, MOBILE HARBOR AND QUAY USING IT 이필승; 한순흥; 정현; 김용욱; 최국진; 김상일; 조영희; et al, 2014-12-10 |
222 | Motor control system and method for compensating disturbance 김경수; 김용훈 |
223 | Mouse Interface System for Providing Kinesthetic andTactile Feedback KWON, DONG SOO; KIM, MUN SANG; SON, SEUNG WOO; Kyung, Ki-Uk, 2011-11-29 |
224 | Multi-cantilever MEMS sensor, manufacturing method thereof, sound source localization apparatus using the multi-cantilever MEMS sensor, sound source localization method using the sound source localization apparatus Park, Young-Jin; Park, Youn-Sik; Kim, Jin-Young; Jo, Hyun; Lee, Seung-Seob; Kim, Yong Chul |
225 | Multi-photon microscopy and imaging method, lowering repetition rate to use time-gated detection Yoo, Hongki; Kim, Wooseop; Kang, Juehyung; Kang, ungyo |
226 | Natural gas liquefaction system 장대준; 폴베르간, 2017-11-28 |
227 | Natural Gas Liquefaction System with Turbine Expander and Liquefaction Method Thereof Jeong, Sangkwon; Hwang, Gyu Wan; Baek, Seung Whan |
228 | NC가공에 있어서 트라이아크보간방법 양민양; 이택민 |
229 | Near-infrared condensing heating unit, near-infrared condensing heater using the same, and method for forming panel using the same 양동열; 이은호; 황준선; 이창환; 양우호, 2017-04-25 |