1 | 9 전역 자가 위치 추정방법의 추후 결과 김병국; 김성진, 한국자동제어학술회의, pp.169 - 172, 2009-09 |
2 | A study on a mechanism of oscillation in a micro pulsating heat pipe 윤애정; 김성진, 2017 춘계 학술대회, 대한기계학회, KSME, 2017-05-26 |
3 | (A) study on the numerical optimization of the thermal performance of pulsating heat pipes = 진동형 히트파이프의 수치적 열성능 최적화에 관한 연구link Noh, Hyung Yun; Kim, Sung Jin; et al, 한국과학기술원, 2020 |
4 | Analysis of fluid flow and heat transfer in an internally finned tube using a porous medium approach = 다공성 매질 접근법을 이용한 내부 휜을 가지는 관내 열 및 유체 유동 해석link Yoo, Jae-Wook; 유재욱; et al, 한국과학기술원, 2004 |
5 | Analytic study on flow and heat transfer characteristics in channels with axial variations in geometry = 축 방향을 따라 형상이 변하는 관 내의 유동 및 열전달 특성에 관한 해석적 연구link Yu, Dahm; Kim, Sung Jin; et al, 한국과학기술원, 2019 |
6 | Apparatus and method for operating analog beam in a beam division multiple access system 이용훈; 김민현; 김성진; 박정호; 강현정, 2016-09-20 |
7 | Busy period analysis of general input queues with vacations = 일반 도착과정을 가지는 휴가형 대기행렬모형의 바쁜기간 분석link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2008 |
8 | Compact Camera Module 생산 공정 자동화를 위한 Stage 내의 유동 및 열 해석 김태영; 김성진, 한국정밀공학회지, v.25, no.6, pp.26 - 32, 2008-06 |
9 | Compact modeling and optimization of the pin-fin heat sink with variable fin density cooled by natural convection 이영진; 김성진, 2021 대한기계학회 춘계학술대회, (사)대한기계학회, 2021-05-26 |
10 | Comparison of PCM solidification characteristics between triplex tubes with circular and longitudinal fins = 원형 휜과 종 방향 휜이 있는 삼중관에서 상변화 물질 고형화 특성 비교link Changhwan Kim; Sung Jin Kim; et al, 한국과학기술원, 2019 |
11 | Comparison of thermal characteristics between the plate-fin and pin-fin heat sinks in natural convection = 자연대류 조건 하에서의 Plate-fin Heat Sink 와 Pin-fin Heat Sink 의 열적 특성 비교link Joo, Young-Hwan; 주영환; et al, 한국과학기술원, 2014 |
12 | Comparison of thermal performance and flow characteristics between closed-loop and closed-end pulsating heat pipes = 폐루프형 진동형 히트 파이프와 폐쇄형 진동형 히트 파이프의 열성능과 유동 특성 비교link Jun, Soo Hwan; 전수환; et al, 한국과학기술원, 2015 |
13 | Confined 마이크로 스케일 노즐을 통한 충돌제트의 열전달 특성에 대한 실험적 연구 = Experimental study on thermal characteristics of a microscale impinging jet from a confined nozzlelink 윤영직; Youn, Young-Jik; et al, 한국과학기술원, 2008 |
14 | Control of morphology and grain size for efficient perovskite light-emitting diodes = 모폴로지와 결정 크기 제어를 통한 페로브스카이트 발광 다이오드 효율 향상에 관한 연구link Kim, Sung Jin; Kim, Sang Ouk; et al, 한국과학기술원, 2019 |
15 | Development of a centrifugal heat sink = 원심력을 이용한 히트싱크의 개발link Kim, Ju-Wan; 김주완; et al, 한국과학기술원, 2009 |
16 | Development of a piezoelectric heat sink = 압전소자를 이용한 히트싱크의 개발link Park, Hee-Seung; 박희승; et al, 한국과학기술원, 2010 |
17 | Dynamic liquid-film model for numerical simulation of flow and heat transfer in pulsating heat pipes = 진동형 히트파이프 내 유동 및 열전달의 수치해석을 위한 동적 액막 모델link Bae, Joohan; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
18 | Effect of artificial cavities on the thermal performance of pulsating heat pipes = 인공의 캐비티가 진동형 히트파이프의 열성능에 미치는 영향에 관한 연구link Kim, Wookyoung; Kim, Sung Jin; et al, 한국과학기술원, 2017 |
19 | Effects of Circulating Flow on the Thermal Performance of a Pulsating Heat Pipe 김성진; 김우경, 2018년도 대한기계학회 추계 학술대회, 대한기계학회, 2018-12 |
20 | Effects of cross-section geometry on the thermal performance of a micro pulsating heat pipe = 채널 단면형상이 마이크로 진동형 히트파이프의 열성능에 미치는 영향link Park, Sung-Wan; 박성완; et al, 한국과학기술원, 2014 |
21 | Efficient hardware architecture for mode decision in H.264/MPEG-4 AVC encoder = H.264/MPEG-4 AVC 부호화기에서의 모드 결정을 위한 효율적인 하드웨어 구조link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2009 |
22 | Embedded image processor design for capacitive-type fingerprint sensors = 정전용량방식 지문감지 센서에 집적하기 위한 영상처리장치의 설계link Kim, Seong-Jin; 김성진; et al, 한국과학기술원, 2003 |
23 | Energy-efficient power and feedback bit allocation method in wireless coordinated communication systems = 무선 협력 통신 시스템에서 전력 효율을 고려한 전력 및 피드백 비트 할당에 대한 연구link Kim, Seongjin; 김성진; et al, 한국과학기술원, 2015 |
24 | Experimental and numerical analysis of heat transfer phenomena in a sensor tube of a mass flow controller = 질량 유량계 센서관에서의 열전달 현상에 대한 수치적 해석 및 실험적 연구link Jang, Seok-Pil; 장석필; et al, 한국과학기술원, 2000 |
25 | Experimental and numerical study on heat transfer enhancement using a microchannel heat sink subject to an impinging jet = 충돌제트를 가지는 마이크로 채널을 이용한 열전달 향상에 관한 실험 및 계산적 연구link Jang, Seok-Pil; 장석필; et al, 한국과학기술원, 2003 |
26 | Experimental and theoretical study on electrokinetic pumping in micro and nano channels = 미소 채널에서의 Electrokinetic pumping 에 관한 실험 및 계산적 연구link Min, Jung-Yim; 민정임; et al, 한국과학기술원, 2005 |
27 | Experimental and theoretical study on the operational characteristics of micro pulsating heat pipes: In the perspective of a stopover phenomenon 전수환; 김성진, 2018 춘계 학술대회, 대한기계학회, 대한기계학회, 2018-04 |
28 | Experimental investigation of heat transfer in pulsating heat pipes operating in circulation mode = 순환모드로 작동하는 진동형 히트파이프의 열전달 현상에 관한 실험적 연구link Noh, Hyung Yun; 노형윤; et al, 한국과학기술원, 2015 |
29 | Experimental investigation on working fluid selection in a pulsating heat pipe = 진동형 히트 파이프의 작동 유체 선정에 관한 실험적 연구link Kim, Juno; Kim, Sung Jin; et al, 한국과학기술원, 2020 |
30 | Experimental study on a micro flow sensor = 미소 유량 센서에 관한 실험적 연구link Kim, Tae-Hoon; 김태훈; Kim, Sung-Jin; Lee, Sang-Yong; et al, 한국과학기술원, 2004 |
31 | Experimental study on heat transfer enhancement using a flow-induced self-oscillating microfin array = 유동에 의해 자가진동하는 미소휜 배열을 이용한 열전달 향상에 관한 연구link Go, Jeung-Sang; 고정상; et al, 한국과학기술원, 2001 |
32 | Experimental study on the effect of the condenser section length on the thermal performance of PHPs = 응축부의 길이가 진동형 히트 파이프의 열성능에 미치는 영향에 관한 실험적 연구link Kim, Juno; 김주노; et al, 한국과학기술원, 2016 |
33 | Experimental study on the fabrication and thermal performance evaluation of a polymer-based flexible pulsating heat pipe = 폴리머 기반 연성 진동형 히트파이프의 제작과 열성능 평가에 관한 실험적 연구link Lim, Jonghyun; Kim, Sung Jin; et al, 한국과학기술원, 2017 |
34 | Experimental study on the heat transfer characteristics of a micro scale impinging jet = 미세 충돌 제트의 열전달 특성에 관한 실험적 연구link Choo, Kyo-Sung; 추교성; et al, 한국과학기술원, 2007 |
35 | Experimental study on the operational characteristics of pulsating heat pipes in a horizontal orientation = 진동형 히트 파이프의 수평 작동 특성에 관한 실험적 연구link Jun, Soohwan; Kim, Sung Jin; et al, 한국과학기술원, 2019 |
36 | Fabrication and experimental study of a polymer-based pulsating heat pipe with metallic packaging = 금속 패키징이 적용된 폴리머 기반 진동형 히트파이프의 제작 및 실험적 연구link Jung, Chuljae; Kim, Sung Jin; et al, 한국과학기술원, 2019 |
37 | Feasibility Study on Robust Self-powered and Maintenance-free Sensor System for Autonomous Train Control System 김솔; 김성진; 이지훈; 이동진; 유종원, 2022 한국전자파학회 동계종합학술대회, 한국전자파학회, 2022-02-11 |
38 | Flexible and thin thermal superconductors 김성진, 한국냉동공학학술대회, 한국에이치백산업협회, 2013-03-13 |
39 | Forced convection heat transfer in the microchannel heat sink for electronic equipment cooling = 전자 제품 냉각용 마이크로채널 히트싱크 내의 강제대류 열전달link Kim, Duck-Jong; 김덕종; et al, 한국과학기술원, 1999 |
40 | Heat transfer and flow characteristics of air-assisted impinging water jets = Air-water 혼합 충돌제트의 유동과 열전달특성에 관한 연구link Trainer, Daniel; Trainer, Daniel; et al, 한국과학기술원, 2013 |
41 | HIGH-FREQUENCY SIGNAL PREDISTORTION DEVICE AND NONLINEAR DISTORTION CORRECTING DEVICE FOR POWER AMPLIFIER 이용훈; 이상일; 김민현; 설영욱; 정의림; 홍순일; 김성진; et al, 2018-03-20 |
42 | Intradermal vaccination via microneedles = 마이크로니들을 이용한 피내 접종 연구link Kim, Seong Jin; 김성진; et al, 한국과학기술원, 2016 |
43 | Investigation of power generation from concentration gradient by reverse electrodialysis in ion-selective nanostructures = 이온 선택성을 지닌 나노 구조물을 이용한 역전기투석방식의 농도 차 발전에 관한 연구link Kim, Ju-Wan; 김주완; et al, 한국과학기술원, 2013 |
44 | Investigation on transient characteristics of current leads for superconducting magnet = 초전도 자석에 사용되는 전류 도입선의 과도 특성에 관한 연구link In, Se-Hwan; 인세환; Kim, Sung-Jin; Jeong, Sang-Kwon; et al, 한국과학기술원, 2002 |
45 | L 자형 유동 조건에서 방사형 플레이트 휜 히트싱크의 열성능 최적화에 관한 연구 = Thermal optimization of radial plate-fin heat sinks under L-shaped flowlink 이길호; Lee, Gil Ho; et al, 한국과학기술원, 2016 |
46 | (La, Sr)MnO3 을 이용한 가변 방사율 소재에 관한 연구 한선우; 최봉수; 송태호; 김성진; 이봉재, 대한기계학회논문집 B, v.37, no.6, pp.583 - 590, 2013-06 |
47 | Label-free CMOS DNA sensor with on-chip noise reduction scheme for real-time dna quantification = 잡음 제거 회로가 집적된 단일 칩 실시간 유전물질 정량 측정 센서link Kim, Seong-Jin; 김성진; et al, 한국과학기술원, 2008 |
48 | Localization and mapping for indoor mobile robots with 2-D Isotropic Ultrasonic Receivers = 실내 환경에서 이차원 등방 초음파 수신기들이 있는 이동 로봇의 위치 추정 및 지도 작성link Kim, Seong-Jin; 김성진; et al, 한국과학기술원, 2011 |
49 | L자형 유동 하의 방사형 플레이트 휜 히트 싱크의 열저항 예측 김성진; 이길호, 2016 춘계 학술대회, 대한기계학회, KSME, 2016-04-20 |
50 | METHOD AND APPARATUS FOR PERFORMING COMMUNICATION IN MULTI-STAGE BEAM FORMING SYSTEM 이용훈; 김성진; 김민현; 황의태; 박정호; 설지윤, 2016-05-31 |
51 | Mussel-inspired mineralization of calcium carbonate and bone hydroxyapatite = 홍합 접착 모델을 모방한 탄산칼슘과 하이드록시아파타이트의 무기화 작용link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2011 |
52 | Mussel-inspired mineralization of calcium carbonate and bone hydroxyapatite = 홍합 접착 모델을 모방한 탄산칼슘과 하이드록시아파타이트의 무기화 작용link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2011 |
53 | Numerical investigation of the effect of nozzle geometry on the heat transfer rate of a confined turbulent impinging jet = 노즐 형상이 난류 국한충돌제트의 열전달률에 끼치는 영향에 대한 수치적 연구link Lee, Kil Young; Kim, Sung Jin; et al, 한국과학기술원, 2017 |
54 | Observation of local heat transfer during pool boiling of a highly wetting fluid = 젖음성이 높은 유체를 이용한 풀비등에서의 국소 열전달 관찰link Jung, Jae-Hoon; 정재훈; et al, 한국과학기술원, 2014 |
55 | On the boundary conditions at the interface between a porous layer and a fluid layer = 다공성 층과 유체 층 사이의 경계면에서의 경계 조건에 대한 연구link Min, Jung-Yim; 민정임; et al, 한국과학기술원, 2001 |
56 | One-dimensional thermal-hydraulic modeling of manifold microchannel heat sinks = 매니폴드 마이크로채널 히트싱크의 열수력 성능 예측을 위한 1차원 모델링link Lee, Hansol; 이한솔; et al, 한국과학기술원, 2024 |
57 | Optimal thermal design of pin-fin heat sinks with variable fin density in natural convection = 자연대류 조건에서 휜의 조밀도가 변하는 핀-휜 히트싱크의 열적 최적화link Lee, Young Jin; Kim, Sung Jin; et al, 한국과학기술원, 2020 |
58 | Optimum channel spacing of heat sources or sinks in a finite volume 정재훈; 김성진, 대한기계학회 열공학부분 춘계학술대회, 대한기계학회, 2012-05-24 |
59 | Piezoelectrically driven single- and dual-axis rotational micromirrors for large angular motion = 회전각 증대를 위한 압전 구동형 회전 미소거울의 설계,제작 및 시험link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2002 |
60 | Plate pulsating heat spreader with artificial cavities 김성진; Kim, Woo Kyoung |