Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1 to 20 of 3882

1
1-um 이터븀 광섬유 레이저의 타이밍 잡음 특성 최적화 = Timing jitter optimization of 1-um Yb-fiber laserlink

김효지; Kim, Hyo-Ji; et al, 한국과학기술원, 2013

2
1/3 옥타브 웨이브렛 변환을 이용한 과도상태 변형형상의 가시화 및 평판의 진동/소음 저감에의 응용 = Visualization of transient deflection shapes using 1/3 octave wavelet transform and its application to vibration and noise reduction of a platelink

백상흠; Baik, Sang-Hum; et al, 한국과학기술원, 1997

3
100m 수준의 대기 중 광 펄스 열 전송 초과 타이밍 잡음 분석과 타이밍 안정화 = Characterization of excess timing noise and timing stabilization for 100m scale atmospheric optical pulse train transferlink

강진호; Kang, Jin Ho; et al, 한국과학기술원, 2015

4
155mm 포탄 탄도수정신관용 MEMS 안전장전장치 = MEMS safety and arming device for course correction fuze of 155mm munitionlink

이춘재; Lee, Chun-Jae; et al, 한국과학기술원, 2014

5
1D 나노소재 네트워크의 압저항 효과 해석을 위한 시뮬레이션 모델 연구 = (A) study on the simulation model for the analysis of piezoelectric resistance in 1D nanomaterial networkslink

여진욱; 유승화; et al, 한국과학기술원, 2021

6
1족 로봇의 도약을 위한 공압구동기의 압력 및 위치 제어 = Controlling pressure and position of pneumatic actuator for jumping of one-legged robotlink

정재환; 김경수; et al, 한국과학기술원, 2018

7
1차 고차원 모델 표현과 계층적 크리깅을 이용한 고차원 신뢰성 해석을 위한 적응형 크리깅 방법 = Adaptive kriging method for high dimensional reliability analysis using first-order high dimensional model representation and hierarchical kriginglink

박영서; 이익진; et al, 한국과학기술원, 2022

8
1축 운동의자를 이용한 가상현실 게임 시뮬레이터에서 그래픽과 운동의 통합 = Tight integration of graphics and motion in a VR game simulator with a 1-DoF motion-chairlink

이종환; Lee, Jong-Hwan; et al, 한국과학기술원, 2001

9
2 K 헬륨 줄-톰슨 냉동기의 효율 개선 방안에 대한 연구 = Research of efficiency improvement for 2 K Helium JT refrigeratorlink

박창기; 정상권; et al, 한국과학기술원, 2017

10
2-D 전산유체 유동 해석용 통합 프로그램의 개발 = Development of total package for computational analysis of two-dimentional fluid flowslink

서홍원; Seo, Hong-Won; et al, 한국과학기술원, 1995

11
2-단유압 릴리이프 밸브의 특성해석에 관한 연구 = A study on the characteristic analysis of a two-stage hydraulic relief valvelink

윤재호; Yun, Jae-Ho; et al, 한국과학기술원, 1980

12
2-유체 분사기를 포트분사에 적용한 SI 엔진의 성능에 관한 실험적 연구 = An experimental study on port installed 2-phase injector equipped SI engine performancelink

강진석; Kang, Jin-Suk; et al, 한국과학기술원, 1997

13
2D braille display module using eccentric rotating latch structured voice coil actuator = 편심된 회전 래치 구조의 보이스 코일 액추에이터를 이용한 2차원 점자 디스플레이 모듈link

Kim, Joonyeong; Kwon, Dong-Soo; et al, 한국과학기술원, 2018

14
2D 레이저 스캔을 이용한 로봇의 산악주행 장애물 판단에 대한 연구 = Obstacle classification for mobile robot traversability using 2D laser scanninglink

김민희; Kim, Min-Hee; et al, 한국과학기술원, 2011

15
2½-차원 물체상 공혈 위치 인식을 위한 영상처리 방법연구 = Image processing for hole position recognition on 2½-dimensional objects for assembly robotlink

최용원; Choi, Yong-Won; et al, 한국과학기술원, 1985

16
2개의 김벌을 가지는 대칭 동조자이로의 설계인자 변화에 따른 편류오차 해석 = Drift error analysis of two gimbal type symmetric dynamically tuned gyroscope(DTG) with design parameter variationlink

이관섭; Lee, Kwan-Sup; et al, 한국과학기술원, 1995

17
2계 난류모델에 있어서 변계수 추정 : 계속적인 연구 = Evaluation of variable coefficients in the second order turbulence models : further extensionlink

고재찬; Ko, Jae-Chan; et al, 한국과학기술원, 1982

18
2관절 평면 로보트에 대한 좌표 역변환의 실시간 해법에 관한 연구 = A study on the new approach for solving the inverse kinematics of the two-link planar robot in real timelink

박서욱; Park, Seo-Wook; et al, 한국과학기술원, 1988

19
2단 4방향 전기 공압 유량 제어 벨브의 설계와 동력학적 해석 = Design and dynamic analysis of a two-stage four-way electro-pneumatic flow control valvelink

이재경; Lee, Jae-Kyung; et al, 한국과학기술원, 1982

20
2단 압력조절 밸브에 대한 정력학적 동력학적 분석 = Static and dynamic analysis of a two-stage relief valvelink

신영철; Shin, Yung-Chul; et al, 한국과학기술원, 1978

rss_1.0 rss_2.0 atom_1.0