Browse by Subject JOINTS
Showing results 1 to 60 of 79
| A portable telerehabilitation system for remote evaluations of impaired elbows in neurological disorders Park, Hyung-Soon; Peng, Qiyu; Zhang, Li-Qun, IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING, v.16, no.3, pp.245 - 254, 2008-06 |
| A proper generalized decomposition-based harmonic balance method with arc-length continuation for nonlinear frequency response analysis Lee, Gil -Yong; Park, Yong-Hwa, COMPUTERS & STRUCTURES, v.275, 2023-01 |
A reference-free and non-contact method for detecting and imaging damage in adhesive-bonded structures using air-coupled ultrasonic transducers Sunarsa, Timotius Yonathan; Aryan, Pouria; Jeon, Ikgeun; Park, Byeongjin; Liu, Peipei; Sohn, Hoon, MATERIALS, v.10, no.12, 2017-12 |
| A Study on the Optimization of Anisotropic Conductive Films for Sn-3Ag-0.5Cu-Based Flex-on-Board Application at a 250 degrees C Bonding Temperature Zhang, Shuye; Yang, Ming; Wu, Yang; Du, Jikun; Lin, Tiesong; He, Peng; Huang, Mingliang; et al, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.8, no.3, pp.383 - 391, 2018-03 |
| Abnormal grain growth of Ni3Sn4 at Sn-33Ag/Ni interface Kim, JH; Jeong, SW; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.45, no.3, pp.710 - 713, 2004-03 |
| Accuracy of 3D Cartilage Models Generated From MR Images Is Dependent on Cartilage Thickness: Laser Scanner Based Validation of In Vivo Cartilage Koo, Seungbum; Giori, Nicholas J.; Gold, Garry E.; Dyrby, Chris O.; Andriacchi, Thomas P., JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.131, no.12, 2009-12 |
| Adhesion Characteristics of Carbon Black Embedded Glass/Epoxy Composite Park, Sang Wook; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.24, no.4, pp.755 - 773, 2010 |
| Adhesion characteristics of carbon/epoxy composites treated with low- and atmospheric pressure plasmas Kim, JK; Kim, HS; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.17, no.13, pp.1751 - 1771, 2003 |
| Adhesion characteristics of fiber-exposed glass composites Lee, Dongyoung; Oh, Yuyoung; Nam, Soohyun; Choe, Jaeheon; Lee, Dai Gil, COMPOSITE STRUCTURES, v.165, pp.9 - 14, 2017-04 |
| Adhesion characteristics of plasma surface treated carbon/epoxy composite Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.17, no.7, pp.1017 - 1037, 2003 |
| Adhesion characteristics of plasma-surface-treated carbon fiber-epoxy composite with respect to release films used during demolding Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.18, no.4, pp.473 - 494, 2004 |
| Analysis of a short interfacial crack from the corner of a rectangular inclusion Pahn, LO; Earmme, Youn Young, INTERNATIONAL JOURNAL OF FRACTURE, v.106, no.4, pp.341 - 356, 2000-12 |
| APPLICATION OF ADHESIVE JOINING TECHNOLOGY FOR MANUFACTURING OF THE COMPOSITE FLEXSPLINE FOR A HARMONIC DRIVE Jeong, KS; Lee, Dai Gil; Kwak, YK, JOURNAL OF ADHESION, v.48, no.1-4, pp.195 - 195, 1995 |
| Avoidance of fabricational thermal residual stresses in co-cure bonded metal-composite hybrid structures Kim, Hak Sung; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.20, no.9, pp.959 - 979, 2006 |
| Chip warpage model for reliability prediction of delamination failures Yang, Se Young; Kwon, Woon-Seong; Lee, Soon-Bok, MICROELECTRONICS RELIABILITY, v.52, no.4, pp.718 - 724, 2012-04 |
| Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems Jang, SY; Paik, Kyung-Wook, IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, v.24, no.4, pp.269 - 274, 2001-10 |
| Composite wrist blocks for double arm type robots for handling large LCD glass panels Lee, CS; Lee, Dai Gil; Oh, JH; Kim, HS, COMPOSITE STRUCTURES, v.57, no.1-4, pp.345 - 355, 2002-07 |
| Creep deformation of lead-free Sn-3.5Ag-Bi solders Shin, SW; Yu, Jin, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, v.42, no.3, pp.1368 - 1374, 2003-03 |
| Deformation mechanism and its effect on electrical conductivity of ACF flip chip package under thermal cycling condition: An experimental study Kwon, WS; Ham, SJ; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.46, no.2-4, pp.589 - 599, 2006 |
| Design and characterization of a photo-sensor based force measurement unit (FMU) Gu, Gwang Min; Shin, Yong Kyun; Son, Jina; Kim, Jung, SENSORS AND ACTUATORS A-PHYSICAL, v.182, pp.49 - 56, 2012-08 |
| Development of a low-cost multifunctional wireless impedance sensor node Min, Ji-Young; Park, Seung-Hee; Yun, Chung-Bang; Song, Byung-Hun, SMART STRUCTURES AND SYSTEMS, v.6, no.5-6, pp.689 - 709, 2010-07 |
| Development of shock-absorbing insert for honeycomb sandwich panel Park, Hyun-Su; Hwang, Dae-Hyun; Han, Jae-Hung; Yang, Jinkyu, AEROSPACE SCIENCE AND TECHNOLOGY, v.104, 2020-09 |
| DEVELOPMENT OF THE ANTHROPOMORPHIC ROBOT WITH CARBON-FIBER EPOXY COMPOSITE-MATERIALS Lee, Dai Gil; JEONG, KS; KIM, KS; Kwak, Yoon Keun, COMPOSITE STRUCTURES, v.25, no.1-4, pp.313 - 324, 1993 |
| Effect of Aluminum Concentration on the Interfacial Reactions of Sn-3.0Ag-xAl Solders with Copper and ENIG Metallizations Xia, YH; Jee, YK; Yu, Jin; Lee, TY, JOURNAL OF ELECTRONIC MATERIALS, v.37, no.12, pp.1858 - 1862, 2008-12 |
| Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging Jeong, SW; Kim, JH; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.33, no.12, pp.1530 - 1544, 2004-12 |
| Effect of Cu content on the mechanical reliability of Ni/Sn-3.5Ag system Kim, JY; Sohn, YC; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.3, pp.770 - 776, 2007-03 |
| Effect of nonconducting filler additions on ACA properties and the reliability of ACA flip-chip on organic substrates Yim, MJ; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, v.24, no.1, pp.24 - 32, 2001-03 |
| Effect of Surface Roughness on the Adhesive Strength of the Heat-Resistant Adhesive RTV88 Cho, Tae Min; Choo, Yeon Seok; Lee, Min Jung; Oh, Hyeon Cheol; Lee, Byung Chai; Park, Tae Hak; Shin, Young Sug, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.23, no.15, pp.1875 - 1882, 2009 |
| Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad Jee, YK; Ko, YH; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.7, pp.1879 - 1887, 2007-07 |
| Effects of Be and Co addition on the growth of Sn whiskers and the properties of Sn-based Pb-free solders Chang, Jaewon; Seo, Sun-Kyoung; Cho, Moon Gi; Lee, Dong Nyung; Kang, Kyoo-Sik; Lee, Hyuck Mo, JOURNAL OF MATERIALS RESEARCH, v.27, no.14, pp.1877 - 1886, 2012-07 |
| Effects of Co addition in eutectic Sn-3.5Ag solder on shear strength and microstructural development Lee, Jung-Sub; Chu, Kun-Mo; Patzelt, Rainer; Manessis, Dionysios; Ostmann, Andreas; Jeon, DukYoung, MICROELECTRONIC ENGINEERING, v.85, no.7, pp.1577 - 1583, 2008-07 |
| Effects of Co Addition on Bulk Properties of Sn-3.5Ag Solder and Interfacial Reactions with Ni-P UBM Kim, Dong Hoon; Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.1, pp.39 - 45, 2009-01 |
| Effects of microstructure and residual stress on fatigue crack growth of stainless steel narrow gap welds Jang, Changheui; Cho, Pyung-Yeon; Kim, Minu; Oh, Seung-Jin; Yang, Jun-Seog, MATERIALS & DESIGN, v.31, no.4, pp.1862 - 1870, 2010-04 |
| Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging Cho, Moon Gi; Kang, Sung K.; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.36, no.11, pp.1501 - 1509, 2007-11 |
| Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering Kim, J. Y.; Yu, Jin, APPLIED PHYSICS LETTERS, v.92, no.9, 2008-03 |
| Effects of Solder Ball Geometry on Lap Shear Creep Rate Kim, Sung-Bum; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.39, no.3, pp.326 - 332, 2010-03 |
| Effects of under bump metallization and nickel alloying element on the undercooling behavior of Sn-based, Pb-free solders Cho, Moon Gi; Kang, Sung K.; Seo, Sun-Kyoung; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF MATERIALS RESEARCH, v.24, no.2, pp.534 - 543, 2009-02 |
| Evaluation of CaO-Al2O3 adhesive bonding properties for beta ''-Al2O3 solid electrolyte sealing for alkali metal thermal electric converter Kim, Seyoung; Joo, Jong Hoon; Kim, Sun-Dong; Woo, Sang-Kuk, CERAMICS INTERNATIONAL, v.39, no.8, pp.9223 - 9227, 2013-12 |
| Evaluation of mechanical interlock effect on adhesion strength of polymer-metal interfaces using micro-patterned surface topography Kim, Won-Seock; Yun, Il-Han; Lee, Jungju; Jung, HeeTae, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, v.30, no.6, pp.408 - 417, 2010-09 |
| Failure characterization of laser welds under combined loading conditions Ha, J.; Huh, Hoon, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.69, pp.40 - 58, 2013-04 |
| Fe addition to Sn-3.5Ag solder for the suppression of Kirkendall void formation Kim, Sung-Hwan; Yu, Jin, SCRIPTA MATERIALIA, v.69, no.3, pp.254 - 257, 2013-08 |
| Flame and silane treatments for improving the adhesive bonding characteristics of aramid/epoxy composites Kim, Jin-Gyu; Choi, Il-Beom; Lee, Dai-Gil; Seo, Il-Sung, COMPOSITE STRUCTURES, v.93, no.11, pp.2696 - 2705, 2011-10 |
| Flip-chip bonding of MEMS scanner for laser display using electroplated AuSn solder bump Chu, KM; Choi, WK; Ko, YC; Lee, JH; Park, HyoHoon; Jeon, DukYoung, IEEE TRANSACTIONS ON ADVANCED PACKAGING, v.30, no.1, pp.27 - 33, 2007-02 |
| Formation of intermetallic compounds in the Ni bearing lead free composite solders Lee, JW; Lee, ZH; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.46, no.11, pp.2344 - 2350, 2005-11 |
| Growth inhibition of interfacial intermetallic compounds by pre-coating oriented Cu6Sn5 grains on Cu substrates Yang, Ming; Ko, Yong Ho; Bang, Junghwan; Kim, Taek-Soo; Lee, Chang-Woo; Zhang, Shuye; Li, Mingyu, JOURNAL OF ALLOYS AND COMPOUNDS, v.701, pp.533 - 541, 2017-04 |
| Improvement of the adhesive peel strength of the secondary barrier with level difference for LNG containment system Yoon, Soon-Ho; Kim, Ki-Hyun; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.95, pp.528 - 538, 2013-01 |
| Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions Song, Jung Han; Huh, Hoon, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015 |
| Interfacial bond behavior of FRP fabrics bonded to fiber-reinforced geopolymer mortar Khalida, Hammad Raza; Ha, S. K.; Park, S. M.; Kim, G. M.; Lee, Haeng-Ki, COMPOSITE STRUCTURES, v.134, pp.353 - 368, 2015-12 |
| Interfacial reaction between 42Sn-58Bi solder and electroless Ni-P/immersion Au under bump metallurgy during aging Cho, MG; Paik, Kyung-Wook; Lee, HyuckMo; Booh, SW; Kim, TG, JOURNAL OF ELECTRONIC MATERIALS, v.35, no.1, pp.35 - 40, 2006-01 |
| Interfacial reaction between Sn-1Bi-5In-9Zn solder and Cu substrate Yoon, SW; Choi, WK; Lee, HyuckMo, SCRIPTA MATERIALIA, v.40, no.3, pp.327 - 332, 1999 |
| Intermetallic compound spalling characteristics of Sn-3.5Ag solder over ternary electroless Ni under-bump metallurgy Jang, Dong-Min; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.26, no.24, pp.3032 - 3037, 2011-12 |
| Ladybird beetle-inspired compliant origami Baek, Sang-Min; Yim, Sojung; Chae, Soo-Hwan; Lee, Dae-Young; Cho, Kyu-Jin, SCIENCE ROBOTICS, v.5, no.41, 2020-04 |
| Low-Temperature Bonding of PZT (PbZrTiO3) and Flexible Printed Circuits Using Sn52In Solder Anisotropic Conductive Films for Flexible Ultrasonic Transducers Park, Jae-Hyeong; Park, Jong Cheol; Shin, SangMyung; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.9, no.11, pp.2152 - 2159, 2019-11 |
| Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modes Lim, TS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.56, no.2, pp.211 - 221, 2002-05 |
| Non-conductive film with Zn-nanoparticles (Zn-NCF) for 40 mu m pitch Cu-pillar/Sn-Ag bump interconnection Shin, Ji Won; Kim, Il; Choi, Yong-Won; Kim, Youngsoon; Kang, Un Byung; Jee, Young Kun; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.55, no.2, pp.432 - 441, 2015-02 |
| Noncontact laser ultrasonic inspection of weld defect in lithium-ion battery cap Choi, Seungjun; Liu, Peipei; Yi, Kiyoon; Sampath, Santhakumar; Sohn, Hoon, JOURNAL OF ENERGY STORAGE, v.73, 2023-12 |
| Numerical analysis of the damage behavior of an aluminum/CFRP hybrid beam under three point bending Shin, Dong Kil; Kim, Hee Chul; Lee, Jungju, COMPOSITES PART B-ENGINEERING, v.56, pp.397 - 407, 2014-01 |
| On the computation of the near-tip stress intensities for three-dimensional wedges via two-state M-integral Lee, Y; Im, Seyoung, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, v.51, no.5, pp.825 - 850, 2003-05 |
| Optimization and reliability evaluation of COG bonding process Jeong, Young Hun; Jung, Seung-Won; Jin, Songwan; Kim, Kyung-Soo; Yun, Won-Soo, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.30, no.3, pp.1305 - 1313, 2016-03 |
| Peel strength improvement of foam core sandwich beams by epoxy resin impregnation on the foam surface Lee, CS; Lim, TS; Kwon, JW; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.17, no.5, pp.687 - 701, 2003 |
Discover
Type
Open Access
Date issued
- 30,976 2020 - 2024
- 100,006 2010 - 2019
- 75,681 2000 - 2009
- 44,727 1990 - 1999
- 14,360 1980 - 1989
- 62 1964 - 1969