1 | 6절점 HCT6 요소를 이용한 탄-완전소성체의 평형유한요소 해석법 = Equilibrium finite element analysis of elasto-perfectly plastic bodies using six node HCT6 elementlink 문병식; Moon, Byung-Sik; et al, 한국과학기술원, 1998 |
2 | (A) study on thickness optimization of inflatable circular membrane for large optical system = 대구경 광학계의 팽창용 원형 박막 두께 최적화에 관한 연구link Soh, Min-Gwan; 소민관; et al, 한국과학기술원, 2003 |
3 | HDD 구동기 팔의 위상 최적화 = Topology optimization of HDD actuator armlink 장수영; Chang, Su-Young; et al, 한국과학기술원, 1999 |
4 | Particle-in-cell 방법을 이용한 입상재료 유동의 탄소성 모델 해석 = Particle-in-cell analysis of the flow of granular material with elasto-plastic modellink 연정흠; Yeon, Jeoung-Heum; et al, 한국과학기술원, 1998 |
5 | PCB내의 온도 분포를 고려한 칩의 최적배치에 관한 연구 = A study of layout design of chips on PCB considering temperature distributionlink 조지현; Cho, Ji-Hyon; et al, 한국과학기술원, 1998 |
6 | SMC 압축 성형 공정에서의 비등방성 열유동 모델링 및 유한 요소 해석 연구 = Modeling and finite element analysis of anisotropic flow in SMC compression moldinglink 이응식; Lee, Eung-Shik; et al, 한국과학기술원, 1994 |
7 | SMC 압축 성형 공정에서의 열변형에 관한 유한 요소 해석 = Finite element analysis of thermally-induced deformation in SMC compression moldinglink 이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 1996 |
8 | Taylor-galerkin 법을 이용한 동적 해석의 평가 및 그 개선에 관한 연구 = Study on the improvement of taylor-galerkin method for the analysis of structural dynamicslink 한상구; Han, Sang-Goo; et al, 한국과학기술원, 1992 |
9 | TFT-LCD 용 유리패널의 최적 지지 위치 선정에 관한 연구 = Study on the optimal supporting positions of TFT-LCD glass panellink 정병창; Jung, Byung-Chang; 곽병만; 윤성기; et al, 한국과학기술원, 2004 |
10 | 개선된 수준구조를 이용한 유한요소 강성행렬의 밴드폭 최소화 방법 연구 = A new algorithm for the minimization of the bandwidth of the finite element stiffness matrix using improved level structurelink 김민성; Kim, Min-Sung; et al, 한국과학기술원, 1994 |
11 | 계층적 B-스플라인을 이용한 스플라인 유한요소법의 국부 세분화에 관한 연구 = A study on the local refinement in spline finite element method using hierarchical B-splinelink 하주환; Hah, Zoo-Hwan; et al, 한국과학기술원, 2010 |
12 | 고체 입자를 이용한 열교환기에서의 유동 및 열전달의 유한 요소 해석 = Finite element analysis of flow and heat transfer in solid particle moving beds of heat exchangerlink 이완술; Lee, Wan-Sul; et al, 한국과학기술원, 1997 |
13 | 고출력 레이저 시스템 주반사경의 위상최적설계 = Topology optimization of the primary mirror of a high-power laser systemlink 김지연; Kim, Ji-Yeon; et al, 한국과학기술원, 2005 |
14 | 구조물의 토폴로지 최적화를 위한 재료 분배 문제에 관한 연구 = A study on the material distribution problem for the topology optimization of structureslink 박상훈; Park, Sang-Hoon; et al, 한국과학기술원, 1995 |
15 | 국부 세분화를 고려한 T-스플라인 유한요소해석에 관한 연구 = A study on T-spline finite element analysis with local refinementlink 김기승; Kim, Ki-Seung; et al, 한국과학기술원, 2007 |
16 | 단섬유 강화 사출성형 복합재료로 만든 차량용 범퍼빔의 충돌해석 = The impact analysis of bumper beam made of short-fiber-reinforced injection-molded (SFRIM) compositelink 곽창수; Kwak, Ch'ang-Soo; et al, 한국과학기술원, 1998 |
17 | 단섬유복합재료의 거동에 대한 확률유한요소해석 = Stochastic finite element analysis of the behavior of short fiber composite materialslink 강명석; Kang, Myung-Seok; et al, 한국과학기술원, 1993 |
18 | 동적문제의 유한요소해석을 위한 시간영역의 계층적 적응 알고리즘 연구 = A new hierarchical adaptive refinement scheme in time for the finite element structural dynamicslink 조진우; Cho, Jin-Woo; et al, 한국과학기술원, 1994 |
19 | 레벨셋 기반 위상최적화를 이용한 토션빔 최적설계 = Optimal design for torsion beam using level set based topology optimizationlink 이병규; Lee, Byung-Kyu; et al, 한국과학기술원, 2008 |
20 | 로켓의 액체연료 탱크내에서 연료슬로슁 해석 및 최적 배플설계에 관한 연구 = A study on the analysis of fuel sloshing in liquid propellant tank and optimum design of ring baffleslink 유준태; Yoo, Joon-Tae; et al, 한국과학기술원, 1999 |
21 | 무요소법에 의한 선형탄성문제와 강소성문제 해석에 관한 연구 = Studies on the meshfree analysis of linear elastic problems and rigid-plastic problemslink 한정수; Han, Jung-Soo; et al, 한국과학기술원, 2001 |
22 | 물질좌표계를 이용한 고 유연도를 갖는 구조물 부재의 비선형 과도해석 = Non-linear transient finite element analysis of highly flexible structures using convected frameslink 이환; Lee, Hwan; et al, 한국과학기술원, 1994 |
23 | 미소 유체 진동자의 최적설계 = Optimum design of a micro-fluidic oscillatorlink 노유정; Noh, Yoo-Jeong; et al, 한국과학기술원, 2003 |
24 | 변형거울의 영향함수 및 설계인자 분석에 관한 연구 = A study on influence functions and design factors of a deformable mirrorlink 임찬경; Im, Chan-Kyung; et al, 한국과학기술원, 2009 |
25 | 비등방성 재료의 열탄소성 해석 연구 = Finite element thermo-elasto-plastic analysis of anisotropic materialslink 조동협; Cho, Dong-Hyeob; et al, 한국과학기술원, 1993 |
26 | 비선형 탄성 재료의 변형 에너지 함수를 통한 재료 특성화 방법에 관한 연구 = A study on the characterization of gum vulcanizates by strain energy function of hyperelastic materiallink 박현철; Park, Hyun-Cheol; et al, 한국과학기술원, 1992 |
27 | 샥-하트만 센서를 이용한 파면측정의 정확도 향상에 관한 연구 = A study on the improvement of wavefront sensing accuracy for shack-hartmann sensorslink 노경완; Roh, Kyung-Wan; et al, 한국과학기술원, 2006 |
28 | 샥-하트만 파면 센서의 측정범위 확장에 관한 연구 = A study on the dynamic range expansion of Shack-Hartmann wavefront sensorslink 김민석; Kim, Min-Seok; et al, 한국과학기술원, 2007 |
29 | 손상을 고려한 고체 추진제의 비선형 점탄성 구성방정식에 관한 연구 = A study on the nonlinear viscoelastic constitutive equation of solid propellant considering damagelink 윤경수; Yun, Kyeong-Soo; et al, 한국과학기술원, 2014 |
30 | 스플라인 유한요소법을 이용한 3차원 형상최적설계에 대한 연구 = A study on the 3D shape optimization using isogeometric analysislink 허준영; Hur, Jun-Young; et al, 한국과학기술원, 2012 |
31 | 스플라인 유한요소법을 이용한 제어점의 위치 및 가중치를 설계변수로 하는 2차원 형상최적설계 연구 = A study on the 2D isogeometric shape optimization considering both control point positions and weights as design variableslink 송여울; Song, Yeo-Ul; et al, 한국과학기술원, 2013 |
32 | 신뢰도 제한조건을 가지는 반딧불이 알고리즘의 효율 개선에 관한 연구 = A study on the improvement of firefly algorithm with reliability constraintslink 천봉주; 윤성기; et al, 한국과학기술원, 2017 |
33 | 신뢰도 해석 방법에 대한 비교 연구와 확률 제한 조건에의 적용 = Comparative study of reliability analysis methods and application to probabilistic constraintslink 지홍규; Ji, Hong-Kyu; 곽병만; 윤성기; et al, 한국과학기술원, 2004 |
34 | 실리콘의 이방성 식각 특성을 이용한 정전 구동형 초소형 거울의 개발 = Development of electrostatically-driven vertical micro mirrors using anisotropic silicon etchinglink 서경선; Seo, Kyoung-Sun; 윤성기; 조영호; et al, 한국과학기술원, 1996 |
35 | 실험계획법을 이용한 복합재 경통 적층각의 최적 설계에 관한 연구 = A study on the optimization of ply angles for composite tube using design of experimentslink 박병욱; Park, Byong-Ug; et al, 한국과학기술원, 2009 |
36 | 액체추진로켓의 포고현상 해석과 제어에 관한 연구 = A study on the analysis of pogo and its suppressionlink 장홍석; Chang, Hong-Suk; et al, 한국과학기술원, 2002 |
37 | 열 대류 방식 가속도 센서의 성능향상에 관한 연구 = A study on the performance improvement of a micromachined convective accelerometerlink 오준석; Oh, Jun-Seok; et al, 한국과학기술원, 2006 |
38 | 우주파편과 허니콤 샌드위치 패널의 초고속 충돌 시 허니콤 코어의 형상 제원에 따른 채널링 효과에 관한 연구 = A study on the honeycomb core size effect on the channeling in hypervelocity impact between orbital debris and a honeycomb sandwich panellink 강필성; Kang, Pil-Seong; et al, 한국과학기술원, 2011 |
39 | 유한 요소법과 경계 요소법을 결합한 이차원 탄성 응력 해석에 관한 연구 = Study on the coupling of finite element method and boundary element method for two dimensional stress analysis in elastostaticslink 조용현; Cho, Yong-Hyeon; et al, 한국과학기술원, 1992 |
40 | 이중강성을 갖는 자동차 부싱의 형상 최적설계에 관한 연구 = (A) study on the shape optimization of dual stiffness vehicle bushingslink 마재권; 윤성기; et al, 한국과학기술원, 2017 |
41 | 인공위성 카메라 대구경 반사경 지지부 설계에 관한 전문가 시스템 개발 = Expert system for flexure mount design of large aperture mirrors in satellite cameralink 정혜인; Chung, Hae-In; et al, 한국과학기술원, 2008 |
42 | 인공위성 카메라 주반사경의 위상 최적화 = Topology optimization of the primary mirror of a multi-spectral cameralink 박강수; Park, Kang-Soo; et al, 한국과학기술원, 2001 |
43 | 임계좌굴하중을 고려한 원통형 용기 내부 벽면 보강격자의 위상최적설계 = Topology optimization of inner-wall stiffener for critical buckling loads of cylindrical containerslink 서유덕; Seo, Yu-Deok; et al, 한국과학기술원, 2004 |
44 | 임피더를 고려한 강관의 3차원 고주파 유도용접 해석 = Three dimensional analysis of high frequency induction welding of steelpipes with impederlink 김현중; Kim, Hyun-Jung; et al, 한국과학기술원, 2005 |
45 | 적응광학 시스템의 파면 측정 알고리즘 개발 및 전산모사를 이용한 성능 검증 = The development of new centroid finding algorithm for a SHWFS and performance verification using AO simulationlink 유재은; Yoo, Jae-Eun; et al, 한국과학기술원, 2008 |
46 | 적응광학계 변형거울의 구동기 최적 배열에 관한 연구 = A study on the optimal actuator array of a deformable mirror for adaptive opticslink 엄태경; Uhm, Tae-Kyoung; et al, 한국과학기술원, 2002 |
47 | 차량 조향을 위한 운전자 모델 연구 = A study on driver model for vehicle steeringlink 조영건; Cho, Young-Gun; et al, 한국과학기술원, 1995 |
48 | 최소자승유한요소법을 이용한 유체-구조 연계해석에 관한 연구 = A study on the fluid-structure interaction using LSFEMlink 이성호; Lee, Sung-Ho; et al, 한국과학기술원, 2000 |
49 | 캐드 프로그래밍 인터페이스를 이용한 타이어 형상 최적 설계 = Optimal design of tire contours using CAD programming interfacelink 성영화; Sung, Young-Hwa; 곽병만; 윤성기; et al, 한국과학기술원, 2004 |
50 | 평판 압연공정 유한요소해석의 분산 병렬처리에 관한 연구 = Finite element analysis of strip rolling process using distributive parallel algorithmlink 권기찬; Gwon, Kie-Chan; et al, 한국과학기술원, 1997 |
51 | 혼합 복합 유한요소법을 이용한 와전류문제의 전자기장해석 = Electromagnetic field analysis of eddy current problem using mixed hybrid finite element methodlink 김봉규; Kim, Bong-Kyu; et al, 한국과학기술원, 1995 |
52 | 효율적 정전기장 계산을 통한 MEMS구조물 해석에 대한 연구 = A study on the effective computational algorithm for electrostatic field for the analysis of MEMS structurelink 안재열; Ahn, Jae-Yul; et al, 한국과학기술원, 2002 |