Browse "ME-Theses_Master(석사논문)" by Issue Date 

Jump to a point in the index:

Showing results 61 to 80 of 3882

61
Three dimensional slow viscous flow due to the motion of a sphere moving perpendicularly to the axis of a circular cylinder = 원관축에 수직으로 움직이는 구에 의한 3차원의 느린 점성류link

Im, Se-Young; 임세영; et al, 한국과학기술원, 1978

62
이온 질화에 관한 연구 = A study on ion nitridinglink

서진석; Seo, Jin-Seok; et al, 한국과학기술원, 1978

63
(A) theoretical study on room acoustics = 실내 음향에 대한 이론적 연구link

Kim, Jeung-Tae; 김정태; et al, 한국과학기술원, 1978

64
2단 압력조절 밸브에 대한 정력학적 동력학적 분석 = Static and dynamic analysis of a two-stage relief valvelink

신영철; Shin, Yung-Chul; et al, 한국과학기술원, 1978

65
유한요소법에 의한 재료비선형 구조물의 정적, 동적 해석 = Analysis of static and dynamic response of material nonlinear structures by finite element methodlink

최연선; Choi, Yeon-Sun; et al, 한국과학기술원, 1978

66
Dynamic analysis of slider crank mechanism by finite element method = 유한요소법을 이용한 Slider crank mechanism 의 동적해석link

Ryou, Sung-Ryul; 류성렬; et al, 한국과학기술원, 1978

67
복합 금속 소재 굽힘에 관한 해석 = Analysis of laminated metal strip bendinglink

배원병; Bae, Won-Byong; et al, 한국과학기술원, 1978

68
고강도 합금강 AISI 4140의 피로 균열 성장 거동에 관한 연구 = Fatigue crack growth behavior of AISI 4140 steellink

박근배; Park, Keun-Bae; et al, 한국과학기술원, 1978

69
유압 비례 복합 밸브의 릴리프 특성에 관한 연구 = Pressure relief characteristics of a hydraulic proportional compound valvelink

이윤정; Lee, Yoon-Jung; et al, 한국과학기술원, 1978

70
기하 계획법을 이용한 최적 절삭 조건의 선정에 관한 연구 = On the selection of optimum machining conditions through geometric programming techniquelink

이봉희; Lee, Bong-Hee; et al, 한국과학기술원, 1979

71
간단한 수학적 모델에 의한 크레이터 마모의 해석 = Analysis of crater wear with simple mathematical modellink

기창두; Kee, Chang-Doo; et al, 한국과학기술원, 1979

72
수치제어에서의 Microprocessor 를 이용한 milling machine 의 3차원 해석과 프로그램 = Application of microprocessor and progrmming in numerical controllink

신영철; Shin, Young-Chul; et al, 한국과학기술원, 1979

73
Gyromill 풍차의 효율해석과 모델 연구 = Analysis of the performance of gyromill-rotor and model studylink

김희식; Kim, Hee-Sik; et al, 한국과학기술원, 1979

74
비선형 계획법을 사용한 배치안 모델의 연구 = An analytical approach to facility layout by using nonlinear programming techniquelink

팽정국; Paeng, Jeong-Kook; et al, 한국과학기술원, 1979

75
둔부 인공관절의 금속줄기부에 대한 최적설계모델연구 = A study of the optimal design model for the metal stem in total hip replacementlink

이재원; Lee, Jae-Won; et al, 한국과학기술원, 1979

76
工場施設配置에 관한 硏究 = Study on facilities layout with a case study using CRAFTlink

노형민; Rho, Hyoung-Min; et al, 한국과학기술원, 1979

77
이온 질화 피처리물의 온도 특성 = Temperature characterstics of ion-nitrided workpiecelink

유성연; Yoo, Seong-Yeon; et al, 한국과학기술원, 1979

78
선반 공구에 있어서 칩 유동방향의 예측 = Prediction of chip flow direction for a single-point lathe toollink

이병훈; Lee, Byung-Hoon; et al, 한국과학기술원, 1979

79
수직축 풍력 발전기의 특성 해석 = Performance analysis of a vertical axis wind turbinelink

김광호; Kim, Kwang-Ho; et al, 한국과학기술원, 1979

80
상태변수를 이용한, 불규칙 노면상을 달리는 특수차량의 동적해석 및 최적화에 대한 연구 = A study on dynamic characteristics and optimization of a special weapon vehicle moving on random road profile, using the state variable techniquelink

김재옥; Kim, Jae-Ok; et al, 한국과학기술원, 1979

rss_1.0 rss_2.0 atom_1.0