Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 2721 to 2740 of 3969

2721
엔진 블럭의 가속도 신호에 의한 밸브의 충격신호 회복 = Valve impact signal identification using engine block acceleration measurementlink

이혁; Lee, Hyuk; et al, 한국과학기술원, 1991

2722
엔진 블럭의 진동 신호를 이용한 밸브 간극 진단 = Diagnosis of valve lash using engine block vibration signallink

석정호; Seok, Jeong-Ho; et al, 한국과학기술원, 1992

2723
엔진 진동 제어를 위한 전자석 구동기 설계 및 전류 신호를 이용한 제어 = Design of the current feedback electromagnetic actuator for engine vibration controllink

이보하; Lee, Bo-Ha; et al, 한국과학기술원, 2003

2724
엔진 흡기계 공기 여과기의 음향 특성에 관한 연구 = A study on the acoustical characteristics of the air filter in engine intake systemslink

강장훈; Kang, Jang-Hoon; et al, 한국과학기술원, 2006

2725
엔진 흡기계 소음원의 음향 변수 측정에 관한 연구 = A study on the measurement of acoustic parameters of the intake system of an internal combustion enginelink

조은수; Jo, Eun-Soo; et al, 한국과학기술원, 2005

2726
엔진냉각수, 윤활유 및 흡입공기온도의 자동조절 장치 개발과 각종 온도변화에 따른 엔진성능 측정실험에 관한 연구 = Fabrication of automatic engine temperature controls for coolant, lubricantand intake air, and experimental study on temperature effects on engine performancelink

조석구; Cho, Suk-Koo; et al, 한국과학기술원, 1987

2727
엔진마운트의 등가강성 모형화에 관한 연구 = A study on equivalent stiffness modeling of engine mountlink

정정교; Jeoung, Jeoung-Kyo; et al, 한국과학기술원, 1998

2728
엔진음 능동소음제어와 액티브사운드디자인의 통합 알고리즘 개발 = Integrated algorithm development with engine active noise control and active sound designlink

이학준; 박영진; et al, 한국과학기술원, 2019

2729
엘리베이터 도어 기구의 동역학적 시뮬레이션에 관한 연구 = A study on dynamic simulation of elevator door machinelink

김지웅; Kim, Chi-Ung; et al, 한국과학기술원, 1998

2730
엠보스를 이용한 동특성 변경 : 신경망과 모드 및 스트레인 에너지를 이용한 방법의 비교 연구 = Structural dynamics modification with embossing : a comparison study between neural network and modal dynamic strain energylink

김정욱; Kim, Chong-Uck; 박윤식; 박영진; et al, 한국과학기술원, 2004

2731
여러개의 액채분무간의 유동간섭현상에 관한 실험적 연구 = Experimental study on the flow interaction of multiple liquid sprayslink

정태식; Cheong, Tae-Sig; et al, 한국과학기술원, 1985

2732
여러장의 거리영상 정합에 의한 3차원 형상복원 = Reconstruction of 3-D shape by registration of multiple range imageslink

김영문; Kim, Young-Mun; et al, 한국과학기술원, 1996

2733
여유 자유도 로봇의 시간 최소 경로 설계 = Design of time optimal path of redundant manipulatorlink

이재원; Lee, Jae-Won; et al, 한국과학기술원, 1997

2734
여유 자유도를 가진 복강경 수술 로봇을 위한 조종기의 설계 = Design of a master system for laparoscopic surgery robot with redundant degree of freedomlink

김기영; Kim, Ki-Young; 윤용산; 이정주; et al, 한국과학기술원, 2005

2735
여유구동 폐루프형 로봇의 최적설계에 대한 연구 = Study on the optimal design of closed-loop typee robot with redundant actuationlink

이상헌; Lee, Sang-Heon; et al, 한국과학기술원, 1994

2736
여유자유도 로봇 매니퓰레이터의 위치/충돌/힘 제어에 관한 연구 = A study on position/impact/force control of redundant robot manipulatorslink

박기철; Park, Ki-Cheol; et al, 한국과학기술원, 1993

2737
여유자유도 로봇에 대한 J-Minor 성능지수의 제한궤적 특성 = Characteristic of constraint locus of J-Minor measure for kinematically redundant robotslink

이수진; Lee, Su-Jin; et al, 한국과학기술원, 1994

2738
역주파수응답행렬을 이용한 내부 공간의 구조 경계면상의 진동 및 음향원 규명 = Identification of vibro-acoustic sources on the boundary of enclosed spaces using the inverse frequency response matrixlink

전인열; Jeon, In-Youl; et al, 한국과학기술원, 1999

2739
역확산화염에서 부상 상태의 진동현상에 관한 연구 = The periodic motion of lifted flames in inverse coflow jetslink

원장혁; Won, Jang-Hyeok; et al, 한국과학기술원, 2007

2740
역확산화염에서 산소부화가 매연 영역 구조 및 초기 입자의 성숙도에 미치는 영향에 관한 연구 = Oxygen enrichment on soot zone structure and maturity of incipient particles in inverse diffusion flameslink

정용진; Jung, Yong-Jin; et al, 한국과학기술원, 2008

rss_1.0 rss_2.0 atom_1.0