Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3221 to 3240 of 3903

3221
전달함수 모델링을 통한 다채널 스피커 시스템의 현장 보정 방법 = In-situ calibration of a multichannel loudspeaker system by modeling transfer functionslink

이정민; Lee, Jung-Min; et al, 한국과학기술원, 2011

3222
전동식 구동기를 이용한 능동 감쇠기의 설계 및 응용 = Design and application of active damper using electrodynamic actuatorlink

김언영; Kim, Un-Young; et al, 한국과학기술원, 2001

3223
전동식 구동기를 이용한 능동 엔진마운트의 설계 및 동특성 해석 = Design and dynamic analysis of active engine mount using electro-dynamic actuatorlink

김효석; Kim, Hyo-Suk; et al, 한국과학기술원, 1997

3224
전동식 조향장치의 모델링과 제어기설계에 관한 연구 = A study on modeling and controller design for the motor driven power steering systemlink

고태윤; Ko, Tae-Yoon; 권인소; 홍성원; et al, 한국과학기술원, 1995

3225
전동식 직접 구동형 능동 엔진 마운트의 설계 = Design of active control engine mount using direct drive electrodynamic actuatorlink

박현기; Park, Hyun-Ki; et al, 한국과학기술원, 2007

3226
전동식 직접 구동형 능동 엔진 마운트의 적응제어 = Adaptive control of direct drive electro-dynamic type active engine mountlink

조한규; Cho, Han-Gyu; et al, 한국과학기술원, 2008

3227
전동식가진기의 설계, 제작 및 성능평가 = Design, manufacture and performance test of an electrodynamic exciterlink

이학철; Lee, Hak-Cheol; et al, 한국과학기술원, 1991

3228
전동형 진동식 압축기 토출밸브의 동적해석 = Dynamic analysis of a discharge valve for electrodynamic oscillating compressorlink

김형진; Kim, Hyung-Jin; et al, 한국과학기술원, 2000

3229
전류 측정을 통한 영구 자석형 동기 모터 타입 직구동 모터의 공극 추정기 = Air gap estimator based on measuring current of permanent magnetic synchronous direct drive motorlink

기태석; Ki, Tae-Seok; et al, 한국과학기술원, 2013

3230
전류신호를 이용한 전자기 베어링계의 제어 = Displacement sensorless magnetic bearing control by current measurementlink

권계시; Kwon, Kye-Si; et al, 한국과학기술원, 1994

3231
전륜구동차의 엔진마운트 최적화에 관한 연구 = A study of engine mount optimization of a front wheel drive carlink

이유진; Lee, You-Jin; et al, 한국과학기술원, 1987

3232
전반사형 외인성 페브리-페롯 간섭형 광섬유 센서를 이용한 압력센서 개발 = Developement of total reflective extrinsic fabry-perot fiber optic pressure sensorlink

허진석; Heo, Jin-Seok; et al, 한국과학기술원, 2002

3233
전산기에 의한 공작기계의 수치제어에 관한 연구 = A study on the computer numerical control of machine toollink

허주; Hoh, Joo; et al, 한국과학기술원, 1976

3234
전산유체역학을 활용한 마찰교반용접 툴 형상 비교에 대한 연구 = A study on the comparison of FSW tool shapes based on CFD analysislink

김수덕; Kim, Su Deok; et al, 한국과학기술원, 2016

3235
전임상 연구를 위한 다목적 OCTA 시스템 개발 = Development of multi-purpose OCTA system for pre-clinical studieslink

정선홍; 오왕열; et al, 한국과학기술원, 2021

3236
전자 박판 부품의 가공성 평가에 대한 연구 = Estimation of formability for sheet metal forming of electronic partslink

이병찬; Lee, Byoung-Chan; et al, 한국과학기술원, 1995

3237
전자 샤시 시스템에 대한 고장 진단 = Fault diagnosis for electric chassis systemslink

류성필; Ryu, Seong-Pil; et al, 한국과학기술원, 2002

3238
전자 패키징용 경사진 전도성 범프에 관한 연구 = A study on inclined conductive bump for electronic packaginglink

박아영; Park, Ah-Young; et al, 한국과학기술원, 2011

3239
전자기 베어링 지지 스핀들 계에서의 공구 축어긋남 보상 = Feedforward compensation of tool axis misalignment in active magnetic bearing-spindle systemlink

윤여권; Yoon, Yeo-Kwon; et al, 한국과학기술원, 1996

3240
전자기력을 이용한 3축 초정밀 구동기의 설계, 해석 및 제어에 관한 연구 = A study on the design, analysis and control of three axis actuator using electro-magnetic forcelink

이기하; Lee, Ki-Ha; et al, 한국과학기술원, 1996

rss_1.0 rss_2.0 atom_1.0