1 | An embeddable wireless strain sensor based on inductive coupling = 전자기 유도 기반의 삽입 적용이 가능한 무선 변형률 센서link Wong, Zi Jing; 황자경; et al, 한국과학기술원, 2008 |
2 | Carbon/Carbon brake disk의 3차원 파손 해석 = 3 Dimensional failure analysis of carbon/carbon brake diskslink 김경희; Kim, Kyung-Heui; et al, 한국과학기술원, 1995 |
3 | Effect of polybenzimidazole (PBI) film coating on hypervelocity impact resistance for space applications = 우주환경적용을 위한 폴리벤즈이미다졸(PBI) 필름이 초고속 내충격에 미치는 영향에 관한 연구link Sathish Kumar, Sarath Kumar; Kim, Chun-Gon; et al, 한국과학기술원, 2016 |
4 | Effects of reduced graphene oxide on the durability of nanocomposites in low earth orbit space environment = 환원된 산화 그래핀이 첨가된 저궤도 우주환경용 나노복합재료의 내구성에 대한 연구link Jurado Manriquez, Edwin Antonio; Kim, Chun-Gon; et al, 한국과학기술원, 2016 |
5 | Experimental and numerical studies on composite tubes for the energy absorber of Korean TTX = 복합재 튜브를 이용한 한국형 TTX의 에너지 흡수장치에 대한 실험 및 수치해석 연구link Nguyen, Cao Son; Nguyen, Cao Son; Kim, Chun-Gon; 김천곤; et al, 한국과학기술원, 2010 |
6 | Experimental stress analysis for the elastic bending of the pretwisted rotor blades = 비틀림이 없는 회전날개의 휨에 대한 실험적 응력해석link Kim, Chun-Gon; 김천곤; et al, 한국과학기술원, 1982 |
7 | FBG 센서를 이용한 복합재 접합 구조물의 번형률 기반 손상 모니터링에 관한 연구 = Strain-based damage monitoring of a composite-bonded structure using fiber bragg grating sensorslink 권희중; Kwon, Heejung; et al, 한국과학기술원, 2016 |
8 | High velocity impact energy absorption characteristics of shear thickening fluid impregnated kevlar fabric = 전단농화유체 함침된 케블라 섬유의 초고속 충격 에너지 흡수 특성에 대한 연구link Park, Yu-Rim; 박유림; et al, 한국과학기술원, 2013 |
9 | Hollow-cylindrical composites structural battery = 중공 실린더 형상 복합재료 구조 전지link Pyo, Jaechan; Kim, Chun-Gon; et al, 한국과학기술원, 2020 |
10 | Improvement of ballistic impact resistance using flattened roll design and $SiO_2$ shear thickening fluid impregnated fabric = Flattened roll design과 $SiO_2$ 전단농화유체 함침 직물을 적용한 방탄성능 향상 연구link Kim, Il-Jin; 김일진; et al, 한국과학기술원, 2010 |
11 | MWNT 첨가 유리섬유 강화 복합재료 이용한 RAS의 유해환경하 성능 연구 = Study on RAS using MWNT added glass fiber reinforced composite under harsh environmentslink 김진규; Kim, Jin-Kyu; et al, 한국과학기술원, 2013 |
12 | MWNT가 첨가된 유리섬유 직물 복합재료의 기계적 물성에 관한 연구 = A study on the mechanical properties of MWNT-added glass/epoxy fabric compositeslink 김명섭; Kim, Myung-Sub; et al, 한국과학기술원, 2005 |
13 | RAS와 PEC 불연속면에 의한 RCS 감소 = RCS reduction at a discontinuity between RAS and PEClink 장우혁; 김천곤; et al, 한국과학기술원, 2020 |
14 | Shadow moire기법을 이용한 층간분리가 존재하는 복합재 평판의 좌굴거동 연구 = An experimental study on delamination buckling using shadow moire methodlink 안진수; Ahn, Jin-Soo; et al, 한국과학기술원, 1997 |
15 | Space durable polymer-matrix for low earth orbit environment = 저궤도 우주환경에 적합한 고분자 기지재료link Son, Gil-Sang; 손길상; et al, 한국과학기술원, 2012 |
16 | 가속도 센서를 위한 감쇠 시스템 개발 및 측정범위 확장에 대한 연구 = Development of damping system and dynamic range extension for accelerometerlink 김진혁; Kim, Jin-Hyuk; et al, 한국과학기술원, 2012 |
17 | 가속도계 적용을 위한 반사형 격자판-광섬유 센서 시스템의 특성 = Characteristics of a novel reflective grated panel-optical fiber sensor system for accelerometerslink 이연관; Lee, Yeon-Gwan; et al, 한국과학기술원, 2009 |
18 | 광섬유 브래그 격자 센서를 이용한 복합재 샌드위치 구조의 굽힘 물성치 저하 예측 = Estimation of flexural properties degradation in composite sandwich structures using fiber bragg grating sensorslink 장병욱; Jang, Byeong-Wook; et al, 한국과학기술원, 2008 |
19 | 광섬유 센서를 이용한 액체 혼합물의 굴절률 측정 = Measurement of refractive index in liquid mixture using fiber optic sensorslink 최성희; Choi, Seong-Hee; et al, 한국과학기술원, 2007 |
20 | 광섬유 센서를 이용한 우주환경하에서 복합재료 적층시편의 노화에 따른 열팽창계수변화 측정 = Measurement of CTE change in composite laminate with aging under space environment using fiber optic sensorslink 강상국; Kang, Sang-Guk; et al, 한국과학기술원, 2002 |
21 | 광탄성 기법을 이용한 터빈로터 퍼트리 부의 응력해석 = Stress analysis of fir-tree root in turbine rotor using photoelastic techniquelink 신광복; Shin, Kwang-Bok; et al, 한국과학기술원, 1995 |
22 | 극저온 환경에서 탄소섬유강화 복합재료의 인장 물성에 관한 연구 = A study on tensile properties of carbon fiber reinforced composites under cryogenic environmentlink 김명곤; Kim, Myung-Gon; et al, 한국과학기술원, 2004 |
23 | 극저온에서 탄소섬유강화 복합재료의 미소균열에 대한 저항성 향상에 관한 연구 = A study on the improvement of microcrack resistance of carbon fiber reinforced composites at cryogenic temperaturelink 홍중식; Hong, Joong-Sik; et al, 한국과학기술원, 2006 |
24 | 기계 학습과 주성분 분석을 이용한 데이터 불균형 하의 비행 중 하중 감시 및 손상 검출 시스템 = In-flight load monitoring and damage detection system using machine learning and principal component analysis under data imbalancelink 신창교; 김천곤; et al, 한국과학기술원, 2022 |
25 | 나노 실리카 분산계가 함침된 고강도 섬유의 마찰효과가 방탄특성에 미치는 영향 = Friction effect on the ballistic impact behavior of nano silica colloid impregnated high strength fabriclink 이성현; Lee, Song-Hyon; et al, 한국과학기술원, 2008 |
26 | 다방향으로 입체 보강된 복합재의 열물성치 예측 = Prediction of thermal properties of spatially reinforced compositeslink 이상의; Lee, Sang-Eui; et al, 한국과학기술원, 2001 |
27 | 두꺼운 복합재 평판의 기공에 의한 기계적 물성 저하와 비파괴적 평가 = Degradation of mechanical properties due to void in thick composite laminates and its nondestructive evaluationlink 권규남; Kwon, Kyu-Nam; et al, 한국과학기술원, 2002 |
28 | 레이더 반사면적 감소 기술이 적용된 구조체 안테나의 설계 및 제작 = Design and fabrication of structural antenna with radar cross section reduction technologylink 장홍규; Jang, Hong-Kyu; et al, 한국과학기술원, 2008 |
29 | 마이크로 유전자 알고리즘을 이용한 보강 적층된 복합재 구조물의 최적설계 = Optimal design of composite laminated stiffened structures using micro genetic algorithmlink 이무근; Yi, Moo-Keun; et al, 한국과학기술원, 2006 |
30 | 반도체 섬유 전자파 흡수 구조의 RCS 감소 효과 = RCS reduction effect of semiconductive fiber radar absorbing structurelink 최재훈; Choi, Jae Hun; et al, 한국과학기술원, 2016 |
31 | 복합재 구조에 삽입된 광섬유 센서의 개선된 ingress/egress 기법 개발 = Improved ingress/egress methods for optical fibers embedded in the composite structureslink 박상오; Park, Sang-Oh; et al, 한국과학기술원, 2005 |
32 | 복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003 |
33 | 사출 성형에 의해 제작된 다중벽 탄소 나노튜브/PMMA 복합재의 기계적 물성에 관한 연구 = A study on mechanical properties of MWNT/PMMA composites fabricated by injection molding processlink 이원준; Lee, Won-Jun; et al, 한국과학기술원, 2004 |
34 | 상용 항공기 좌석 경량화를 위한 소재 대체 설계 기술 연구 = (A) study on material substitution design method for weight reduction of commercial aircraft passenger seatlink 이상훈; 김천곤; et al, 한국과학기술원, 2017 |
35 | 샌드위치구조를 이용한 충격손상방지 구조물 = Impact damage protection in composite structure using sandwich structure conceptlink 김성준; Kim, Sung-Joon; et al, 한국과학기술원, 1994 |
36 | 신경회로망을 이용한 복합재 보의 손상 검출 = Damage detection in composite beams using neural networkslink 성대운; Sung, Dae-Un; et al, 한국과학기술원, 1996 |
37 | 신경회로망을 이용한 복합재 적층판의 충격위치 검출 = Detection of impact location for composite plates using neural networkslink 오정훈; Oh, Jung-Hoon; et al, 한국과학기술원, 1998 |
38 | 압전재료를 이용한 복합재 구조물의 진동 및 충격거동해석 = Vibration and impact analysis of composite structures using piezoelectric materialslink 김정석; Kim, Jung-Seok; et al, 한국과학기술원, 1994 |
39 | 열-진공 챔버를 이용한 우주환경하에서의 복합재료의 물성 저하 연구 = Degradation in material properties of composites under space environment using thermal-vacuum chamberlink 조석범; Cho, Seok-Beom; et al, 한국과학기술원, 2000 |
40 | 우주용 하이브리드 샌드위치 쉴딩 시스템의 초고속 충돌 해석 = Hypervelocity impact analysis of hybrid sandwich shielding system for space uselink 손유나; Son, Yu-Na; et al, 한국과학기술원, 2011 |
41 | 우주용 하이브리드 샌드위치 쉴딩 시스템의 초고속 충돌 해석 = Hypervelocity impact analysis of hybrid sandwich shielding system for space uselink 손유나; Son, Yu-Na; et al, 한국과학기술원, 2011 |
42 | 유전율 제어 가능한 단탄소 섬유층이 포함된 다층형 하이브리드 전자파흡수구조 = Multi-slab hybrid radar absorbing structure containing short carbon fiber layer with controllable permittivitylink 진도현; 김천곤; et al, 한국과학기술원, 2021 |
43 | 유해환경요소를 고려한 일체형 복합재 연료탱크의 해석 = Analysis of the integral fuel tank considering harmful environmental factorslink 문진범; Moon, Jin-Bum; et al, 한국과학기술원, 2007 |
44 | 저궤도 우주환경하 탄소섬유강화수지의 충격 특성 및 Whipple Shield 적용 가능성에 대한 연구 = Impact characteristic and application possibility of carbon fiber reinforced plastic for whipple shield under the LEO environmentlink 임건; Lim, Gun; et al, 한국과학기술원, 2011 |
45 | 저궤도 우주환경하 탄소섬유강화수지의 충격 특성 및 Whipple Shield 적용 가능성에 대한 연구 = Impact characteristic and application possibility of carbon fiber reinforced plastic for whipple shield under the LEO environmentlink 임건; Lim, Gun; et al, 한국과학기술원, 2011 |
46 | 전단변형이론에 따른 복합재 적층구조물의 층간분리좌굴과 성장해석 = Analysis of delamination buckling and growth of composite laminated structures based on shear deformation theorylink 경우민; Kyoung, Woo-Min; et al, 한국과학기술원, 1993 |
47 | 접착 길이와 하중 형태가 표면 부착된 광섬유 브래그 격자 센서의 변형률 전달률에 미치는 영향에 관한 연구 = Effect of the bonding length and load type on the strain transfer rate of the surface bonded fiber bragg grating sensorlink 권현석; 김천곤; et al, 한국과학기술원, 2017 |
48 | 접촉문제를 고려한 탄소/탄소 브레이크 디스크의 3차원 파손해석 및 설계 = 3 dimensional failure analysis and design of carbon/carbon brake disk considering contact problemlink 오세희; O, Se-Hee; et al, 한국과학기술원, 2000 |
49 | 초고분자량 폴리에틸렌을 이용한 지구 저궤도 우주 구조물의 우주 방사선 및 초고속 충돌 쉴딩에 관한 연구 = Ultra-high-molecular-weight polyethylene as cosmic radiation and hypervelocity impact shielding material for low earth orbit space structureslink 차지훈; 김천곤; et al, 한국과학기술원, 2019 |
50 | 초음파 탐상법을 이용한 두꺼운 직조 S2-글라스/폴리에스터 복합재의 결함 검출 및 강도 저하에 관한 연구 = Damage detection of thick S2-glass/polyester woven laminates using ultrasonic test and mechanical property degradationlink 강희엽; Kang, Hee-Youb; et al, 한국과학기술원, 2001 |
51 | 층상형 구조전지를 위한 겔 고분자 전해질 기반 일체형 전극 구조 = Integrated electrode structure using gel polymer electrolyte for laminated structural batterylink 노정언; Noh, Jung-Eon; et al, 한국과학기술원, 2023 |
52 | 탄소/탄소 브레이크 디스크의 기계적 특성에 관한 연구 = Mechanical characteristics of carbon/carbon composite for aircraft brake disklink 유재석; Yoo, Jae-Seok; et al, 한국과학기술원, 1997 |
53 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
54 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
55 | 탄소나노튜브를 첨가한 나노 복합재료의 기계적/물리적 특성 변화 연구 = Mechanical and physical properties changes of nanocomposites due to addition of carbon nanotubeslink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2003 |
56 | 탄소섬유 및 고체전해질을 이용한 구조전지의 전기적 특성과 활용가능성 = Electrical characteristics and applicability of structure-batteries using carbon fabric and solid electrolytelink 박미영; Park, Mi-Young; et al, 한국과학기술원, 2012 |
57 | 하중지지형 분리막이 적용된 구조전지 셀 조립 및 평가에 대한 연구 = Assembly and performance evaluation of the structural battery cell using a load-bearing separatorlink 박현욱; 김천곤; et al, 한국과학기술원, 2017 |
58 | 항공기용 브레이크 시스템의 과도기 열탄성 해석 = Transient thermoelastic analysis of an aircraft brake systemlink 김진봉; Kim, Jin-Bong; et al, 한국과학기술원, 1996 |