Browse "AE-Theses_Master(석사논문)" by Type Thesis(Master)

Showing results 641 to 660 of 980

641
비정렬 격자를 사용한 로터-동체 상호간섭효과 해석 = Rotor-fuselage interactional aerodynamic analysis using unstructured mesheslink

이종국; Lee, Jong-Kook; et al, 한국과학기술원, 1999

642
비정렬 격자를 이용한 Euler Code의 병렬처리 기법 = Parallel processing for an Euler Code using unstructured gridlink

김성호; Kim, Sung-Ho; et al, 한국과학기술원, 1994

643
비정렬 동적 격자를 이용한 상대운동이 있는 물체 주위의 2차원 비정상 유동해석 = Two-dimensional unsteady flows around bodies with relative motion using unstructured mesheslink

백경욱; Baek, Kyoung-Wook; et al, 한국과학기술원, 1997

644
비정렬 적응 격자를 이용한 블레이드-와류 간섭에 따른 공탄성 변형 예측 = Prediction of aeroelastic deformation under close BVI using unstructured adaptive mesheslink

조규원; Jo, Kyu-Won; et al, 한국과학기술원, 2002

645
비정렬 적응격자를 이용한 압축성 유동의 최적가중함수 유한요소해석과 고해상도 기법에 관한 연구 = Adaptive upwind finite element method using exponential weighting functions with unstructured mesh and high resolution techniqueslink

성춘호; Sung, Chun-Ho; et al, 한국과학기술원, 1996

646
비정렬 중첩 격자기법을 이용한 풍력터빈 블레이드의 공력 해석에 관한 수치적 연구 = Numerical simulation of the aerodynamic analysis of wind turbine rotor blades using an unstructured overset mesh techniquelink

김다혜; Kim, Da-Hye; et al, 한국과학기술원, 2010

647
비정렬 중첩 격자기법을 이용한 헬리콥터 요소간 공력간섭에 대한 수치적 연구 = Numerical simulation of the interaction effect of helicopter components using an unstructured overset mesh techniquelink

하현석; Ha, Hyun-Seok; et al, 한국과학기술원, 2009

648
비정렬 중첩 격자기법을 통한 동축반전 로터의 간섭현상에 관한 수치적 연구 = Numerical simulation of interaction effects on a coaxial rotor using an unstructured overset mesh methodlink

이종혁; Lee, Jong-Hyuk; et al, 한국과학기술원, 2009

649
비정렬 중첩격자계를 이용한 서로 겹쳐진 물체들 간의 상대운동 해석기법에 관한 연구 = An unstructured chimera technique for overlapped bodies in relative motionlink

안상준; An, Sang-Jun; et al, 한국과학기술원, 2006

650
비정렬 혼합격자계 유동 해석을 위한 고차-고해상도 수치기법 개발 = Development of high-order and high-resolution scheme on unstructured mixed mesh flow solverlink

박상현; 권오준; et al, 한국과학기술원, 2018

651
비정렬 혼합격자계 유동 해석자를 이용한 끝단 형상에 따른 로터 공력특성에 관한 수치적 연구 = Numerical study of rotor aerodynamic performances with various tip shapes an unstructured mixed mesh flow solverlink

황제영; Hwang, Je Yeong; et al, 한국과학기술원, 2015

652
비정렬격자를 사용한 2차원 유동의 직접모사법 개발 = DSMC technique of 2-D flows on unstructured triangular mesheslink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 1998

653
비정상 압축성 램프 유동의 2차원 Navier-Stokes 계산 = Navier-Stokes computational of a two dimensional unsteady compression ramp flowlink

박정응; Park, Jung-Eung; et al, 한국과학기술원, 1999

654
비정상 유동 해석을 위한 병렬화된 비정렬 중첩 격자기법 개발 = Development of an unstructured parallel overset mesh technique for unsteady flow simulationslink

정문승; Jung, Mun-Seung; et al, 한국과학기술원, 2004

655
비평형 상태 해석을 위한 효율적인 직접 모사법 개발 = Development of an efficient DSMC technique considering nonequilibrium effectlink

김재강; Kim, Jae-Gang; et al, 한국과학기술원, 2005

656
비행체 배기플룸의 적외선 복사 해석에 대한 수치적 연구 = Numerical prediction of infrared radiation of flight vehicle exhaust plumelink

조성민; Jo, Sung Min; et al, 한국과학기술원, 2016

657
비행체 비선형 제어를 위한 비선형 상태변수 관측기 설계에 관한 연구 = Nonlinear state-observer design techniques for nonlinear flight controllink

이훈구; Lee, Hun-Gu; et al, 한국과학기술원, 1994

658
비행후 데이타 해석을 통한 항공기 공력계수의 식별 = Identification of aerodynamic coefficients based on post-flight data analysislink

류창경; Ryoo, Chang-Kyung; et al, 한국과학기술원, 1990

659
사다리꼴 단면 항력 계수 측정 = Drag measurements of cylinders having trapezoidal cross-sectionlink

고범용; Koh, Bum-Yong; et al, 한국과학기술원, 1998

660
사출 성형에 의해 제작된 다중벽 탄소 나노튜브/PMMA 복합재의 기계적 물성에 관한 연구 = A study on mechanical properties of MWNT/PMMA composites fabricated by injection molding processlink

이원준; Lee, Won-Jun; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0