1621 | 저주파수 흡음을 위한 헬름홀쯔 공명기 배열형 패널의 설계 방법론 = Design method of helmholtz resonator array panels for low-frequency sound absorptionlink 김상렬; Kim, Sang-Ryul; et al, 한국과학기술원, 2006 |
1622 | 저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink 차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002 |
1623 | 적층고무 면진베어링을 이용한 원자로구조물의 지진응답 감소방법에 관한 연구 = Study on laminated rubber bearing to reduce a nuclear reactor structure's seismic responseslink 유봉; Yoo, Bong; et al, 한국과학기술원, 2002 |
1624 | 적층로터 및 고감쇠 베어링의 해석과 펄스발전기의 설계 및 성능 특성에 관한 연구 = Analysis of laminated rotor and high damped bearing and study on design and performance characteristics of pulsed generatorlink 김영춘; Kim, Yeong-Chun; et al, 한국과학기술원, 2004 |
1625 | 전개성능을 고려한 태양전지판 전개장치용 테잎스프링 힌지 설계 연구 = A study on the tape spring hinge design for deployment device of satellite solar array considering deployment performanceslink 김경원; Kim, Kyung Won; et al, 한국과학기술원, 2015 |
1626 | 전기도금공정을 이용하여 제작된 전해질 기울기 센서 = Electrolytic tilt sensor fabricated by using electroplating processlink 이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 2009 |
1627 | 전기도금된 나노 결정립 니켈 박막의 인장 및 피로 거동 평가 = Evaluation of tensile and fatigue behavior of electrodeposited nanocrystalline nickel filmslink 백동천; Baek, Dong-Cheon; et al, 한국과학기술원, 2009 |
1628 | 전기력이 응집체의 형상과 성장특성에 미치는 영향에 대한 연구 = The effect of electric force on morphology and growth of aggregatelink 박형호; Park, Hyung-Ho; et al, 한국과학기술원, 2002 |
1629 | 전기수력학적 힘을 이용한 단분산 액적의 생성에 관한 연구 = Generation of monodisperse droplets by using electrohydrodynamic forcelink 김명찬; Kim, Myoung-Chan; et al, 한국과학기술원, 2003 |
1630 | 전기자동차용 변속기를 위한 새로운 방식의 클러치 기구에 대한 연구 = (A) study on the new clutch mechanism for the electric vehicle transmissionlink 박승욱; 최세범; Choi, Sei Bum; 김경웅; et al, 한국과학기술원, 2019 |
1631 | 전기장을 이용한 카본나노튜브 정렬 및 부착에 관한 연구 = A study on alignment and attachment of carbon nanotube using dlectric fieldlink 이형우; Lee, Hyung-Woo; et al, 한국과학기술원, 2005 |
1632 | 전기장인가조립법에 의한 탄소나노튜브 카트리지 개발 = Development of carbon nanotube cartridges using electric-field-assisted assembly methodlink 최재성; Choi, Jai-Seong; et al, 한국과학기술원, 2008 |
1633 | 전기적 분무 열분해를 이용한 나노 구조 물질 제조 = Synthesis of nanostructured materials using electrospray pyrolysislink 오현철; Oh, Hyun-Cheol; et al, 한국과학기술원, 2008 |
1634 | 전기적으로 대전된 액적의 충돌 후 거동에 관한 실험적 연구 = An experimental study on post-impingement behavior of an electrically charged dropletlink 류성욱; Ryu, Sung-Uk; et al, 한국과학기술원, 2008 |
1635 | 전단층 유동의 안정 및 준안정 해석 = Spectra and pseudospectra of shear flowslink 최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 2003 |
1636 | 전도 균열을 갖는 강유전체 세라믹의 파괴 인성에 관한 연구 = A study on a fracture toughness for conducting crack in ferroelectric ceramicslink 범현균; Beom, Hyen-Kyun; et al, 한국과학기술원, 2003 |
1637 | 전동형 진동식 압축기의 동적 해석 = Analysis of dynamics of electrodynamic oscillating compressorlink 최규상; Choe, Gyu-Sang; et al, 한국과학기술원, 2000 |
1638 | 전류 환경 아래에서 유연 전극 박막의 전기-기계적 특성 연구 = Electro-mechanical characteristics of flexible conductive film on polymer substrate under electric currentlink 장동원; Jang, Dong-Won; et al, 한국과학기술원, 2017 |
1639 | 전문가 시스템을 이용한 자동조립순서 추론에 관한 연구 = An expert system approach to the automatic generation of robotic assembly sequenceslink 조덕영; Cho, Duck-Young; et al, 한국과학기술원, 1992 |
1640 | 전문가시스템 구축을 통한 피로수명 평가법의 통합과 그 응용 = Development of unified method for fatigue life evaluation through construction of expert system and its applicationlink 전우수; Jeon, Woo-Soo; et al, 한국과학기술원, 2001 |
1641 | 전산유체역학과 유한요소기법의 연동체제를 이용한 아크 용접공정의 열적-금속학적-기계적 거동에 대한 연구 = A thermal-metallurgical-mechanical study of arc welding processes by computational fluid dynamics and finite element method frameworklink 천현필; Cheon, Jason Hyeon Pil; et al, 한국과학기술원, 2017 |
1642 | 전산유체역학을 활용한 파이프 조관용접 및 원주방향 용접의 용융풀 거동에 대한 연구 = A study on molten pool flow behavior in pipe seam welding and girth welding processes by computational fluid dynamicslink 조대원; Cho, Dae-Won; et al, 한국과학기술원, 2014 |
1643 | 전압구동시 압전구동기의 위치결정 정도에 대한 비선형모델링에 관한 연구 = Nonlinear modeling for positioning uncertainty of piezoelectric actuators driven by voltage inputlink 정승배; Jung, Seung-Bae; et al, 한국과학기술원, 1993 |
1644 | 전역 및 광대역 실내 소음 제어를 위한 흡음재 배치 방법론 = Absorptive material arrangement method for global interior noise control in wide frequency rangelink 조성호; Cho, Sung-Ho; et al, 한국과학기술원, 2005 |
1645 | 전자 패키지에서 다층 구조의 기계적인 신뢰성에 관한 연구 = A study on mechanical reliability of multi- layered structure in electronic packageslink 김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 2002 |
1646 | 전자 패키징을 위한 종방향 초음파 접합 공정에 관한 연구 = A study on longitudinal ultrasonic bonding process for electronic packaginglink 김정호; Kim, Jung-Ho; et al, 한국과학기술원, 2004 |
1647 | 전자기유량계의 특성 평가를 위한 자기장과 유동장의 실험 및 수치해석 = An experimental and numerical analysis of electromagnetic and flow fields for characterization of an electromagnetic flowmeterlink 임기원; Lim, Ki-Won; et al, 한국과학기술원, 1998 |
1648 | 전자기적 아크 요동을 이용한 자동용접에 관한 연구 = A study on the automatic welding by using electromagnetic arc oscillationlink 강윤희; Kang, Youn-Hee; et al, 한국과학기술원, 2002 |
1649 | 전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980 |
1650 | 전자패키지 Ball grid array 소더 조인트의 기계적 피로 특성에 관한 연구 = A study on mechanical fatigue behaviors of ball grid array solder joints for electronic packaginglink 박태상; Park, Tae-Sang; et al, 한국과학기술원, 2004 |
1651 | 전정안구반사를 모방한 영상 흔들림 억제에 대한 연구 = Study of constraining image shaking by the vestibulo-ocular reflexlink 고두열; Koh, Doo-Yeol; et al, 한국과학기술원, 2013 |
1652 | 전조 압연 공정에서의 회전 압축 해석 = Analysis of rotational compression in the transverse rolling processlink 나경환; Na, Kyoung-Hoan; et al, 한국과학기술원, 1989 |
1653 | 전해 동박막 재료의 변동하중에서의 피로특성에 관한 기초 연구 = A preliminary study on fatigue property of electrodeposited copper thin films under variable loadinglink 이도영; Lee, Do-Young; et al, 한국과학기술원, 2011 |
1654 | 전해 동박막 재료의 피로수명과 소성변형 거동 = Fatigue life and plastic deformation behavior of electrodeposited copper thin filmslink 황보윤; Hwang Bo, Yun; et al, 한국과학기술원, 2009 |
1655 | 전해 프로세스에 의한 미세 전극 제작 및 기초 패턴의 미세 방전 성형에 대한 연구 = Electrochemical fabrication of micro electrodes and machining of miniaturized basic patternslink 임형준; Lim, Hyung-Jun; et al, 한국과학기술원, 2003 |
1656 | 전해 프로세스에 의한 초미세 전극의 제작 및 응용 = Fabrication of ultrathin electrode by electrochemical process and its applicationslink 임영모; Lim, Young-Mo; et al, 한국과학기술원, 1999 |
1657 | 절대거리 측정을 위한 펨토초 레이저 광 빗 기반의 광주파수 발생기 = Optical frequency generator for absolute distance measurements based on the optical frequency comb of a femtosecond pulse laserlink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2008 |
1658 | 절대거리 측정을 위한 펨토초 레이저를 이용한 분산 간섭계에 관한 연구 = Spectrally-resolved interferometry using a femtosecond pulse laser for absolute distance measurementslink 주기남; Joo, Ki-Nam; et al, 한국과학기술원, 2007 |
1659 | 절삭 작업에서의 채터 진동에 관한 연구 = A study on the chatter vibration in metal cuttinglink 김정석; Kim, Jeong-Suk; 송지호; 이병호; et al, 한국과학기술원, 1991 |
1660 | 절점최소자승요소법의 개발 및 초탄성 구조물의 형상설계민감도해석에의 적용 = Development of node-based least-square element method and its application to shape design sensitivity analysis of hyperelastic structureslink 최용기; Choi, Yong-Gie; et al, 한국과학기술원, 2004 |
1661 | 절차적 CAD 모델의 생성을 위한 설계특징형상의 순서결정 방법 = A method for sequencing of the design features to create a procedural CAD modellink 김익준; Kim, Ik-June; et al, 한국과학기술원, 2014 |
1662 | 점 기반 명칭법을 이용한 파라메트릭 CAD 데이터의 교환 = A point-based naming method for the exchange of parametric CAD Modelslink 송일환; Song, Il-Hwan; et al, 한국과학기술원, 2011 |
1663 | 점탄성 재료의 복소탄성계수 추출 = Estimation of complex modulus for viscoelastic materialslink 안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1994 |
1664 | 점탄성요소 지지경계조건을 갖는 보/평판 구조물의 진동해석 = Vibration analysis of beam and plate structures with viscoelastic boundary supportslink 강기호; Kang, Kee-Ho; et al, 한국과학기술원, 1996 |
1665 | 점탄성재료의 복소영계수 및 유한요소법에의 응용을 위한 포아송비 추출방법 = A method to determine complex young's modulus and poisson's ratio of viscoelastic materials for FEM applicationslink 심송; Sim, Song; et al, 한국과학기술원, 1991 |
1666 | 점탄성층의 수직 및 전단 변형율을 고려한 샌드위치 평판의 진동해석 = Effects of normal and shear strains in viscoelastic core material on modal properties of sandwich plateslink 이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1996 |
1667 | 점회절 구면파의 층밀림 간섭계를 이용한 절대위치 측정 = Absolute position measurement by lateral shearing interferometry of point-diffracted spherical waveslink 주지영; Chu, Ji-Young; et al, 한국과학기술원, 2006 |
1668 | 접착 조인트의 정적 및 피로강도 향상을 위한 최적화 설계에 관한 연구 = Optimal design of the adhesively bonded joints for improving the static and fatigue strengthslink 이수정; Lee, Su-Jeong; et al, 한국과학기술원, 1996 |
1669 | 접합된 탄성 반무한평면에 면외 하중이 작용하는 경사진 가장자리균열의 해석 = Analysis of inclined edge crack in bonded elastic half plane under out-of-plane loadinglink 황은하; Hwang, Eun-Ha; et al, 한국과학기술원, 1992 |
1670 | 정규 격자계를 이용한 2차원 날개단면 주위의 비압축성 난류유동의 수치해석 = Numerical analysis of incompressible turbulent flows over a two-dimensional airfoil using a regular grid systemlink 김기섭; Kim, Ki-Sup; et al, 한국과학기술원, 1995 |
1671 | 정밀 가공 표면의 광학적 비접촉식 인프로세스 표면 평가 = In-process topographical evaluation of precision surfaces by non-contact optical methodslink 임동열; Yim, Dong-Yeol; et al, 한국과학기술원, 1990 |
1672 | 정밀 광 삼각법 변위 센서의 오차 최소화를 위한 구조 설계 및 신호 처리 알고리즘 = System design and signal processing algorithm for error minimization of optical triangulation displacement sensorslink 김경찬; Kim, Kyung-Chan; et al, 한국과학기술원, 2001 |
1673 | 정밀 변위 간섭계의 비선형 오차 보상과 정렬 오차에 둔감한 분해능 향상 방법 = Nonlinear error compensation and alignment error insensitive method for resolution enhancement of precise displacement measuring interferometerlink 안정호; Ahn, Jeogn-Ho; et al, 한국과학기술원, 2010 |
1674 | 정밀 엔드밀링을 위한 공구처짐 보정시스템에 관한 연구 = A study on tool deflection compensation system for precision end millinglink 최종근; Choi, Jong-Geun; et al, 한국과학기술원, 1997 |
1675 | 정밀 캠의 설계 및 가공을 위한 CAD/CAM에 관한 연구 = CAD/CAM for precision cam design and manufacturinglink 손태영; Shon, Tae-Young; et al, 한국과학기술원, 1997 |
1676 | 정적 대변형 하에서 미소 동적 하중을 받는 고무재료의 점탄성 구성방정식에 관한 연구 = A study on the viscoelastic constitutive behavior of rubber under small-amplitude vibration superimposed on large static deflectionlink 김봉규; Kim, Bong-Kyu; et al, 한국과학기술원, 2002 |
1677 | 정전구동 미소 광개폐 소자의 평판 디스플레이 응용에 관한 연구 = Electrostatically driven micro-shutter for flat panel display applicationslink 이용일; Lee, Yong-Il; et al, 한국과학기술원, 1999 |
1678 | 정지 GTA 용접 공정에서 스테인레스 강의 용접 풀 거동에 관한 연구 = A study on the weld pool behavior of stainless steel in stationary GTA welding operationlink 김원훈; Kim, Won-Hoon; et al, 한국과학기술원, 1998 |
1679 | 정형외과 수술로봇의 제어기법 개발 = Development of control method for orthopaedic surgery robotlink 신호철; Shin, Ho-Chul; et al, 한국과학기술원, 2005 |
1680 | 제작오차에 둔감한 수평진동형 마이크로 자이로스코프의 설계 및 해석 = Design and analysis of laterally vibrating microgyroscope insensitive to fabrication errorslink 홍윤식; Hong, Yoon-Shik; et al, 한국과학기술원, 2000 |