39 | Observation of local heat transfer during pool boiling of a highly wetting fluid = 젖음성이 높은 유체를 이용한 풀비등에서의 국소 열전달 관찰link Jung, Jae-Hoon; 정재훈; et al, 한국과학기술원, 2014 |
40 | On the boundary conditions at the interface between a porous layer and a fluid layer = 다공성 층과 유체 층 사이의 경계면에서의 경계 조건에 대한 연구link Min, Jung-Yim; 민정임; et al, 한국과학기술원, 2001 |
41 | Optimal thermal design of pin-fin heat sinks with variable fin density in natural convection = 자연대류 조건에서 휜의 조밀도가 변하는 핀-휜 히트싱크의 열적 최적화link Lee, Young Jin; Kim, Sung Jin; et al, 한국과학기술원, 2020 |
42 | Optimum channel spacing of heat sources or sinks in a finite volume 정재훈; 김성진, 대한기계학회 열공학부분 춘계학술대회, 대한기계학회, 2012-05-24 |
43 | Piezoelectrically driven single- and dual-axis rotational micromirrors for large angular motion = 회전각 증대를 위한 압전 구동형 회전 미소거울의 설계,제작 및 시험link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2002 |
44 | Plate pulsating heat spreader with artificial cavities 김성진; Kim, Woo Kyoung |
45 | Plate-fin heat sink 와 pin-fin heat sink 의 유동 및 열적 특성 비교 = Comparison of fluid flow and thermal characteristics between the plate-fin and pin-fin heat sinkslink 오환희; Oh, Hwan-Hee; et al, 한국과학기술원, 2005 |
46 | Radiation fins and Installation structure of radiation fins and Heat sink with a blowing system inserted between fins 김성진; 김동권; 김태영 |
47 | Reconstruction of the Vibro-acoustic Field on the Shell of the Refrigerator Compressor by Using the Acoustic Holography Based on the BEM 이정권; 강승천; 김성진; 강경석, 한국소음진동공학회 학술대회, pp.133 - 136, 한국소음진동공학회, 1998 |
48 | Scanning flow-impedance microscopy: a non-contact type imaging technique based on hydrodynamics = 유체역학 현상을 이용한 비접촉식 3차원 형상 측정 현미경link Kim, Tae-Young; 김태영; et al, 한국과학기술원, 2010 |
49 | Study on a critical heat flux model for pool boiling based on two different mechanisms: rewetting limit and capillary limit = 서로 다른 두 개의 기작에 기반한 풀비등 임계열유속 모델에 관한 연구: 젖음 한계와 모세관력 한계link Kim, Minchang; Kim, Sung Jin; et al, 한국과학기술원, 2022 |
50 | Study on a thermal network-based model for predicting the thermal resistance of pulsating heat pipeslink Kim, Wookyoung; Kim, Sung Jin; et al, 2021 |
51 | Study on effects of micro-post arrays on the operating limit of pulsating heat pipes = 마이크로-기둥 배열이 진동형 히트파이프의 작동 한계에 미치는 영향에 관한 연구link Lee, Young Jong; Kim, Sung Jin; et al, 한국과학기술원, 2021 |
52 | Study on filtration for extremely compressible cakes = 초압축성 케이크의 여과에 관한 연구link Kim, Sung Il; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
53 | Study on flow and pressure sensors using electrokinetic energy conversion phenomena in microchannels and nanochannels = 마이크로 채널 및 나노 채널 내의 동전기적 에너지 변환 현상을 이용한 유량 센서 및 압력 센서에 관한 연구link Kim, Dong-Kwon; 김동권; et al, 한국과학기술원, 2007 |
54 | Study on flow sensors : a micro-thermal flow sensor and a flow sensor using dielectric barrier discharge = 미소 열식 유량 센서 및 유전체 방전을 이용한 유량 센서에 관한 연구link Kim, Tae-Hoon; 김태훈; et al, 한국과학기술원, 2009 |
55 | Study on fluid flow and thermal characteristics in a nanoscale channel using MD simulation = 분자 동역학 시뮬레이션을 이용한 나노 스케일 채널 내에서의 유체 유동 및 열적 특성에 관한 연구link Choi, Yong-Seok; 최용석; Kim, Sung-Jin; Lee, Sang-Yong; et al, 한국과학기술원, 2004 |
56 | Study on heat transfer mechanisms of a pulsating heat pipe = 진동형 히트파이프의 열전달 기작에 관한 연구link Jo, Jaeyeong; Kim, Sung Jin; et al, 한국과학기술원, 2019 |
57 | Study on the channel layout of pulsating heat pipe with orientation-independent performance under a localized heating condition = 국소 발열 조건에서 방향에 무관한 열성능을 가지는 진동형 히트파이프의 채널 구조에 관한 연구link Cho, Jeongwon; Kim, Sung Jin; et al, 한국과학기술원, 2023 |
58 | Study on the effect of channel layout of flat-plate micro pulsating heat pipes under a local heating conditionlink Lim, jonghyun; Kim, Sung Jin; et al, 2021 |
59 | Study on the effects of oscillation characteristics on heat transfer mechanisms in pulsating heat pipes = 진동형 히트파이프에서 진동 특성이 열전달 기작에 미치는 영향에 관한 연구link Jung, Chuljae; Kim, Sung Jin; et al, 한국과학기술원, 2023 |
60 | Study on the effects of the countercurrent flow interaction on the thermal performance of grooved wick heat pipes = 기체-액체 대향류의 상호작용이 그루브 윅 히트파이프의 열성능에 미치는 영향에 대한 연구link Seo, Joung-Ki; 서정기; et al, 한국과학기술원, 2005 |
61 | Study on the frost formation, heat and mass transfer on the cryogenic surface during cooling and filling process = 냉각 및 충전 과정 중 극저온 표면에서 서리 성장과 열 및 물질 전달에 대한 연구link Choi, Sangho; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
62 | Study on the heat transfer characteristics of single-phase and two-phase impinging jets = 단상유동 및 이상유동 충돌제트의 열전달 특성에 관한 연구link Choo, Kyo-Sung; 추교성; et al, 한국과학기술원, 2011 |
63 | Study on the heat transfer mechanism in nucleate pool boiling of water by measuring local heat flux and temperature = 국소 열유속 및 온도 측정을 통한 물 풀 핵비등에서의 열전달 메커니즘 연구link Kim, Min Chang; Kim, Sung Jin; et al, 한국과학기술원, 2017 |
64 | Study on the heat transfer phenomena for flow and temperature sensors = 유량 및 온도 센서 내의 열전달 현상에 관한 연구link Han, Il-Young; 한일영; et al, 한국과학기술원, 2005 |
65 | Study on the operation limit of micro pulsating heat pipes = 마이크로 진동형 히트파이프의 작동 한계에 관한 연구link Lee, Jungseok; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
66 | Study on the power optimization of transcritical and subcritical rankine power cycles for a low-grade heat source = 저온열원 이용 초월임계 및 아임계 랭킨 동력 사이클의 출력 최적화에 관한 연구link Baik, Young-Jin; 백영진; et al, 한국과학기술원, 2011 |
67 | Study on the thermal performance of bio-inspired wicks for heat pipe = 생체모사 윅을 이용한 히트파이프의 열성능에 관한 연구link Byon, Chan; 변찬; et al, 한국과학기술원, 2012 |
68 | Study on the thermal performance of micro pulsating heat spreader = 마이크로 진동형 히트 스프레더의 열성능에 관한 연구link Youn, Young-Jik; 윤영직; et al, 한국과학기술원, 2012 |
69 | Study on the thermal performance of pulsating heat pipe with dual-diameter channels = 이중 직경 관을 이용한 진동형 히트파이프의 열성능에 관한 연구link Kwon, Gi-Hwan; 권기환; et al, 한국과학기술원, 2014 |
70 | Study on the topology optimization of heat sinks in natural convection with various shapes of physical domain = 다양한 형상의 설계 영역에서의 자연대류 히트 싱크의 위상 최적화에 관한 연구link Joo, Younghwan; 주영환; et al, 한국과학기술원, 2017 |
71 | Study on the transient characteristics of the sensor tube of a thermal mass flow meter = 열식 질량 유량계 센서관의 과도 특성에 관한 연구link Kim, Dong-Kwon; 김동권; et al, 한국과학기술원, 2003 |
72 | Study on thermo-hydrodynamic characteristics of micro pulsating heat pipes in a vertical orientation = 수직으로 위치한 마이크로 진동형 히트파이프의 열-유체역학적 특성에 관한 연구link Yoon, Aejung; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
73 | Study on topology optimization of heat sinks with axially uniform cross-sections in forced convectionlink Lee, Gilho; Kim, Sung Jin; et al, 2021 |
74 | (The) effect of inclination on impinging jets at small nozzle-to-plate spacing = 낮은 노즐-평판간 거리 영역에서 경사각이 충돌제트에 미치는 영향에 대한 실험적 연구link Kang, Tae-Yeob; 강태엽; et al, 한국과학기술원, 2011 |
75 | Theoretical and experimental study on electrokinetic energy conversion efficiency in micro- and nanochannels = 미소 채널 내의 동전기적 에너지 변환 효율에 대한 계산 및 실험적 연구link Choi, Yong-Seok; 최용석; et al, 한국과학기술원, 2009 |
76 | Thermal analysis of an internally finned tube using a porous medium approach = 다공성 매질 접근법을 이용한 내부 휜-관의 열적 해석link Shim, Kyu-In; 심규인; et al, 한국과학기술원, 2002 |
77 | Thermal optimization of circular tubes and heat pipes with axial internal fins = 내부 휜을 가지는 원 관 및 히트 파이프의 열성능 최적화link Do Kyu-Hyung; 도규형; et al, 한국과학기술원, 2007 |
78 | 가요성 유체 압력을 이용한 기계적 에너지 발생장치 김성진; 김동권, 2008-08-14 |
79 | 고발열체 냉각용 미세구조물 내의 열 및 유체 이동 현상 해석을 위한 다공성 매질 접근법 = Analysis of heat and fluid flow in microstructures for high power dissipation using a porous medium approachlink 김덕종; Kim, Duck-Jong; et al, 한국과학기술원, 2003 |
80 | 곡면 삼각 그루브를 가지는 마이크로 히트파이프의 수학적 모델링 및 열성능 최적화 = Modeling and thermal optimization of a micro heat pipe with curved triangular grooveslink 도규형; Do, Kyu-Hyung; et al, 한국과학기술원, 2002 |
81 | 구형 열원을 갖는 Rijke 관에 관한 수치해석적 연구 = The numerical analysis of the rijke tube with spherical heat sourceslink 김성진; Kim, Sung-Jin; et al, 한국과학기술원, 1985 |
82 | 국소 발열 조건에서 진동형 히트파이프의 채널 배치 최적화에 관한 연구 임종현; 김성진, 2019 대한기계학회 추계 학술대회, KSME, 2019-11-15 |
83 | 국소 열유속 및 온도 측정을 통한 물 풀 핵비등에서의 열전달 메커니즘 연구 김민창; 김성진, 2017 추계 학술대회, 대한기계학회, KSME, 2017-11-02 |
84 | 국소 열유속 및 온도 측정을 통한 물 풀비등에서의 임계열유속 메커니즘 연구 김성진; 김민창, 2018년도 대한기계학회 추계 학술대회, 대한기계학회, 2018-12 |
85 | 국소 열전달 관측을 통한 과냉각 풀비등의 임계 열유속 현상에 대한 정량적 분석 = Quantitative analysis of the critical heat flux in subcooled pool boiling through the observation of local heat transferlink 이혜승; Lee, Hyeseung; et al, 한국과학기술원, 2016 |
86 | 굴곡 형상을 갖는 관 내의 유동과 열전달 특성에 관한 해석적 연구 유담; 김성진, 대한기계학회 2014년도 추계학술대회, 대한기계학회, 2014-11-12 |
87 | 굴곡 형상을 갖는 관 내의 유동과 열전달 특성에 관한 해석적 연구 유담; 김성진, 대한기계학회 추계학술대회, 대한기계학회, 2014-11-12 |
88 | 금속 분말을 이용한 이중 공극구조 히트파이프 윅의 최적설계 방법 김성진; 변찬, 2013-03-28 |
89 | 금속 분말을 이용한 히트파이프 윅 및 이의 제조방법 김성진; 변찬, 2012-08-20 |
90 | 금속층상에 증착된 가변 방사율 소재 박막 및 이의 제조방법 이봉재; 한선우; 최봉수; 송태호; 김성진, 2014-08-07 |
91 | 기체 대향류가 존재하는 미소 액체 개수로 유동의 압력강하 특성에 관한 이론 및 실험적 연구 김성진; 남명용; 서정기, 대한기계학회논문집 B, v.29, no.6, pp.747 - 754, 2005-06 |
92 | 나노 구조물을 이용한 농도 차 발전시스템에 관한 연구 김주완; 김동권; 김성진, 대한설비공학회 4개지회 학술발표대회, 대한설비공학회, 2012-05-04 |
93 | 나선형 휜-관 내 유체의 압력 강하에 대한 해석적 연구 유담; 김성진, 대한기계학회 열공학부문 2018년도 춘계학술대회, 대한기계학회, 2018-04-26 |
94 | 나선형 휜-관 내 유체의 압력 강하에 대한 해석적 연구 김성진; 유담, 2018 대한기계학회 춘계 학술대회, 대한기계학회, 2018-04 |
95 | 다공성 매질과 비투과성 벽면 사이의 경계면에 대한 열적 경계조건 김덕종; 김성진, 대한기계학회논문집 B, v.24, no.12, pp.1635 - 1643, 2000-12 |
96 | 다공성 매질에서 Local Thermal Equilibrium에 관한 연구 장석필; 김성진, 대한기계학회논문집 B, v.26, no.8, pp.1172 - 1182, 2002-08 |
97 | 다양한 각도에서 적용가능한 평판 진동형 히트파이프 및 제작방법 김성진; 권기환, 2015-09-10 |
98 | 다양한 단열부 길이에 대해 충진율이 수평 진동형 히트파이프의 최대 입열량에 미치는 영향 = Effects of filling ratio on maximum heat input of pulsating heat pipes in a horizontal orientation with varying adiabatic lengthlink 허성범; 김성진; et al, 한국과학기술원, 2018 |