Showing results 1 to 36 of 36
A Study on the Optimization of Anisotropic Conductive Films for Sn-3Ag-0.5Cu-Based Flex-on-Board Application at a 250 degrees C Bonding Temperature Zhang, Shuye; Yang, Ming; Wu, Yang; Du, Jikun; Lin, Tiesong; He, Peng; Huang, Mingliang; et al, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.8, no.3, pp.383 - 391, 2018-03 |
Abnormal grain growth of Ni3Sn4 at Sn-33Ag/Ni interface Kim, JH; Jeong, SW; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.45, no.3, pp.710 - 713, 2004-03 |
Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems Jang, SY; Paik, Kyung-Wook, IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, v.24, no.4, pp.269 - 274, 2001-10 |
Creep deformation of lead-free Sn-3.5Ag-Bi solders Shin, SW; Yu, Jin, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, v.42, no.3, pp.1368 - 1374, 2003-03 |
Deformation mechanism and its effect on electrical conductivity of ACF flip chip package under thermal cycling condition: An experimental study Kwon, WS; Ham, SJ; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.46, no.2-4, pp.589 - 599, 2006 |
Effect of Aluminum Concentration on the Interfacial Reactions of Sn-3.0Ag-xAl Solders with Copper and ENIG Metallizations Xia, YH; Jee, YK; Yu, Jin; Lee, TY, JOURNAL OF ELECTRONIC MATERIALS, v.37, no.12, pp.1858 - 1862, 2008-12 |
Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging Jeong, SW; Kim, JH; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.33, no.12, pp.1530 - 1544, 2004-12 |
Effect of Cu content on the mechanical reliability of Ni/Sn-3.5Ag system Kim, JY; Sohn, YC; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.3, pp.770 - 776, 2007-03 |
Effect of nonconducting filler additions on ACA properties and the reliability of ACA flip-chip on organic substrates Yim, MJ; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, v.24, no.1, pp.24 - 32, 2001-03 |
Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad Jee, YK; Ko, YH; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.7, pp.1879 - 1887, 2007-07 |
Effects of Be and Co addition on the growth of Sn whiskers and the properties of Sn-based Pb-free solders Chang, Jaewon; Seo, Sun-Kyoung; Cho, Moon Gi; Lee, Dong Nyung; Kang, Kyoo-Sik; Lee, Hyuck Mo, JOURNAL OF MATERIALS RESEARCH, v.27, no.14, pp.1877 - 1886, 2012-07 |
Effects of Co addition in eutectic Sn-3.5Ag solder on shear strength and microstructural development Lee, Jung-Sub; Chu, Kun-Mo; Patzelt, Rainer; Manessis, Dionysios; Ostmann, Andreas; Jeon, DukYoung, MICROELECTRONIC ENGINEERING, v.85, no.7, pp.1577 - 1583, 2008-07 |
Effects of Co Addition on Bulk Properties of Sn-3.5Ag Solder and Interfacial Reactions with Ni-P UBM Kim, Dong Hoon; Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.1, pp.39 - 45, 2009-01 |
Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging Cho, Moon Gi; Kang, Sung K.; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.36, no.11, pp.1501 - 1509, 2007-11 |
Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering Kim, J. Y.; Yu, Jin, APPLIED PHYSICS LETTERS, v.92, no.9, 2008-03 |
Effects of Solder Ball Geometry on Lap Shear Creep Rate Kim, Sung-Bum; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.39, no.3, pp.326 - 332, 2010-03 |
Effects of under bump metallization and nickel alloying element on the undercooling behavior of Sn-based, Pb-free solders Cho, Moon Gi; Kang, Sung K.; Seo, Sun-Kyoung; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF MATERIALS RESEARCH, v.24, no.2, pp.534 - 543, 2009-02 |
Fe addition to Sn-3.5Ag solder for the suppression of Kirkendall void formation Kim, Sung-Hwan; Yu, Jin, SCRIPTA MATERIALIA, v.69, no.3, pp.254 - 257, 2013-08 |
Flip-chip bonding of MEMS scanner for laser display using electroplated AuSn solder bump Chu, KM; Choi, WK; Ko, YC; Lee, JH; Park, HyoHoon; Jeon, DukYoung, IEEE TRANSACTIONS ON ADVANCED PACKAGING, v.30, no.1, pp.27 - 33, 2007-02 |
Formation of intermetallic compounds in the Ni bearing lead free composite solders Lee, JW; Lee, ZH; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.46, no.11, pp.2344 - 2350, 2005-11 |
Interfacial reaction between 42Sn-58Bi solder and electroless Ni-P/immersion Au under bump metallurgy during aging Cho, MG; Paik, Kyung-Wook; Lee, HyuckMo; Booh, SW; Kim, TG, JOURNAL OF ELECTRONIC MATERIALS, v.35, no.1, pp.35 - 40, 2006-01 |
Interfacial reaction between Sn-1Bi-5In-9Zn solder and Cu substrate Yoon, SW; Choi, WK; Lee, HyuckMo, SCRIPTA MATERIALIA, v.40, no.3, pp.327 - 332, 1999 |
Intermetallic compound spalling characteristics of Sn-3.5Ag solder over ternary electroless Ni under-bump metallurgy Jang, Dong-Min; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.26, no.24, pp.3032 - 3037, 2011-12 |
Low-Temperature Bonding of PZT (PbZrTiO3) and Flexible Printed Circuits Using Sn52In Solder Anisotropic Conductive Films for Flexible Ultrasonic Transducers Park, Jae-Hyeong; Park, Jong Cheol; Shin, SangMyung; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.9, no.11, pp.2152 - 2159, 2019-11 |
Non-conductive film with Zn-nanoparticles (Zn-NCF) for 40 mu m pitch Cu-pillar/Sn-Ag bump interconnection Shin, Ji Won; Kim, Il; Choi, Yong-Won; Kim, Youngsoon; Kang, Un Byung; Jee, Young Kun; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.55, no.2, pp.432 - 441, 2015-02 |
Prediction of primary intermetallic compound formation during interfacial reaction between Sn-based solder and Ni substrate Choi, WK; Lee, HyuckMo, SCRIPTA MATERIALIA, v.46, no.11, pp.777 - 781, 2002-06 |
PREDICTION OF RESIDUAL STRESS-INDUCED CRACKING BY FINITE-ELEMENT ANALYSIS KWEON, SY; Choi, Si-Kyung, SCRIPTA METALLURGICA ET MATERIALIA, v.32, no.3, pp.359 - 364, 1995-02 |
Rupture time analyses of the Sn-3.5Ag solder alloys containing Cu or Bi Yu, Jin; Joo, DK; Shin, SW, ACTA MATERIALIA, v.50, no.17, pp.4315 - 4324, 2002-10 |
Shear strength of Sn-3.5Ag solder bumps formed on Ni/Au and organic solderability preservative surface-finished bond pads after multiple reflow steps Lee, JS; Chu, KM; Jeon, DukYoung, JOURNAL OF MATERIALS RESEARCH, v.20, no.11, pp.3088 - 3093, 2005-11 |
Spalling of intermetallic compounds during the reaction between lead-free solders and electroless Ni-P metallization Sohn, YC; Yu, Jin; Kang, SK; Shih, DY; Lee, TY, JOURNAL OF MATERIALS RESEARCH, v.19, no.8, pp.2428 - 2436, 2004-08 |
Study on the effects of copper oxide growth on the peel strength of copper/polyimide Lee, Hyuek Jae; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.37, no.8, pp.1102 - 1110, 2008-08 |
The doped Pd on the crystal calculation and intermetallic property of low-temperature soldered ENEPIG substrates Zhang, Shuye; Wang, Shaoan; Zhang, Shang; Chen, Xiangyu; Zeng, Chen; Paik, Kyung-Wook; He, Peng, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.7094 - 7099, 2023-11 |
Thermodynamic issues of lead-free soldering in electronic packaging Jeong, SW; Kim, JH; Lee, Hyuck-Mo, MATERIALS SCIENCE FORUM, v.426-4, pp.4081 - 4086, 2003 |
Undercooling, Microstructures and Hardness of Sn-Rich Pb-Free Solders on Cu-xZn Alloy Under Bump Metallurgies Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.50, no.9, pp.2291 - 2296, 2009-09 |
Wettability and interfacial reactions of Sn-based Pb-free solders with Cu-xZn alloy under bump metallurgies Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, JOURNAL OF ALLOYS AND COMPOUNDS, v.474, no.1-2, pp.510 - 516, 2009-04 |
Wetting Properties and Interfacial Reactions of Mechanically Alloyed Cu5Zn8-Bearing Pb-Free Solders on a Copper Substrate Jung, In-Yu; Cho, Moon-Gi; Lee, Hyuck-Mo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.11, pp.2301 - 2307, 2009-11 |
Discover