Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Author Im, Ho-Bin

Showing results 37 to 68 of 68

37
냉간 가공량이 방향성 규소강판의 2차 재결정에 미치는 영향 = The role of cold work on the secondary recrystallization of silicon steellink

한장섭; Hahn, Jang-Sop; et al, 한국과학기술원, 1981

38
방향성 규소강판에서 Forsterite coating 한 후의 자기적 성질의 변화 = The change in magnetic properties after forsterite coating in grain-oriented silicon steellink

성기숙; Sung, Gi-Suk; et al, 한국과학기술원, 1985

39
방향성 규소강판에서 냉간압연이 2차 재결정과 자기적 성질에 미치는 영향 = Effect of cold rolling on secondary recrystallization and magnetic properties in grain-oriented silicon steellink

박성욱; Park, Sung-Woock; et al, 한국과학기술원, 1984

40
방향성 규소강판에서 열간압연 예비소둔온도 및 균질화 열처리 온도가 자기적 성질에 미치는 영향 = Effects of soaking and normalizing temperatures on magnetic properties in grain-oriented silicon steellink

이종학; Lee, Jong-Hak; et al, 한국과학기술원, 1984

41
분말 야금 제법에 의한 규소강의 자기적 성질에 관한 연구 = Magnetic properties of silicon steel by powder metallurgy methodlink

이형규; Lee, Hyung-Gyoo; et al, 한국과학기술원, 1980

42
소결 CdS 막의 제조와 전기적 성질 = Preparation and electrical properties of sintered Cds layerslink

양홍근; Yang, Hong-Geun; et al, 한국과학기술원, 1985

43
소결조건이 $Y{1-x}Bi_xBa_2Cu_3O_{7-y}$ 와 $Bi_{1-y}Pb_ySr_1Ca_1Cu_{1.8}O_x$ 계의 초전도 특성에 미치는 영향 = Effects of sintering conditions on superconducting properties of $Y{1-x}Bi_xBa_2Cu_3O_{7-y}$ and $Bi_{1-y}Pb_ySr_1Ca_1Cu_{1.8}O_x$ systemslink

박성; Park, Sung; et al, 한국과학기술원, 1990

44
소결체 $Cd_{1-x}Zn_xS$ 박막의 광학적 특성 및 소결체 $Cd_{1-x}Zn_xS$/CdTe 태양전지의 특성 = Optical properties of sintered $Cd_{1-x}Zn_xS$ films and photovoltaic properties of sintered $Cd_{1-x}Zn_xS$/CdTe solar cellslink

박규찬; Park, Kyu-Charn; et al, 한국과학기술원, 1988

45
소결체 $Cd_{1-x}Zn_xS/CdTe$ 태양전지의 광전압 특성 = Photovoltaic properties of sintered $Cd_{1-x}Zn_xS/CdTe$ solar cellslink

김형수; Kim, Hyeong-Soo; et al, 한국과학기술원, 1992

46
소결체 $GdBa_2Cu_3O_x$ 와 후막형 Y-Bi-Ba-Cu-O 계 초전도체의 제조 조건이 미세구조 및 전기적 특성에 미치는 영향 = Effects of preparation conditions of sintered $GdBa_2Cu_3O_x$ and thick film Y-Bi-Ba-Cu-O system on the microstructure and electrical propertieslink

김시열; Kim, Shi-Yul; et al, 한국과학기술원, 1989

47
소결체 CdS/CdTe 태양전지에서 전극 제작 조건이 전지의 특성에 미치는 영향 = Effects of preparation conditions of contact electrodes on the photovoltaic properties of sintered CdS/CdTe solar cellslink

김철수; Kim, Chul-Soo; et al, 한국과학기술원, 1990

48
소결체 CdS/CdTe 태양전지의 분광반응도 = Spectral response of sintered CdS/CdTe solar cellslink

김선재; Kim, Sun-Jae; et al, 한국과학기술원, 1988

49
소결체 CdS/CdTe 태양전지의 특성에 대한 제조조건과CdS 미세구조의 영향 = Effect of preparation conditions and CdS microstructure on the photovoltaic properties of sintered CdS/CdTe solar cellslink

이재신; Lee, Jae-Shin; et al, 한국과학기술원, 1986

50
스크린-프린티드 CdS/CuxS 태양전지의 제작 및 전기적 성질에 관한 연구 = A study on the preparation and electrical properties of the screen-printed CdS/CuxS solar cellslink

박규찬; Park, Kyu-Charn; et al, 한국과학기술원, 1985

51
스퍼터 증착한 CoCrTa/Cr 박막의 미세구조 및 전기적, 자기적 특성 = Microstructure and electromagnetic properties of sputtered CoCrTa/Cr thin filmslink

이종학; Lee, Jong-Hak; et al, 한국과학기술원, 1994

52
스퍼터 증착한 CoCrTa/Cr박막의 증착조건 및 후 열처리조건에 따른 자기적 특성 = Effects of deposition and post heat treatment conditions on magnetic properties of sputtered CoCrTa/Cr thin filmslink

권세한; Kwon, Se-Han; et al, 한국과학기술원, 1994

53
열산화 조건과 열처리 조건이 Silicon 위에 형성한 tantalum oxide 의 성질에 미치는 영향 = Effects of oxidation and annealing conditions on the properties of tantalum oxide films on silicon substrateslink

박성욱; Park, Sung-Wook; et al, 한국과학기술원, 1992

54
열처리한 소결체 CdS 박막의 전자적 특성 및 CdTe층의 제조 조건이 CdS/CdTe 태양전지의 특성에 미치는 영향 = Electronic properties of heat-treated CdS films and effects of fabrication conditions CdTe layer on the photovoltaic properties of sintered CdS/CdTe solar cellslink

문주태; Moon, Joo-Tae; et al, 한국과학기술원, 1989

55
자장중 열처리가 Fe-B-Si 비정질 권철심의 자기적 성질에 미치는 영향 = Effects of magnetic annealing on the magnetic properties of amorphous Fe-B-Si wound coreslink

송재성; Song, Jae-Sung; 임호빈; 윤문수; et al, 한국과학기술원, 1991

56
전기강판중 규소함량별 탈탄율 변화 = Variation of decarburization degree in electrical steelslink

박진원; Park, Jin-Won; et al, 한국과학기술원, 1984

57
전착법 및 진공증착으로 제작한 CdS박막의 전기 및 광학적 특성에 관한 연구 = Electrical and optical properties of CdS thin films prepared by electrodeposition and vacuum evaporationlink

김시열; Kim, Shi-Yul; et al, 한국과학기술원, 1993

58
전착법으로 제조한 CdS 박막의 전기 및 광학적 성질에 관한 연구 = Electrical and optical properties of CdS films prepared by electrodepositionlink

권오균; Kwon, O-Kyun; et al, 한국과학기술원, 1991

59
철-인 및 철-규소-인 합금들의 자기적 성질에 관한 연구 = The magnetic properties of Fe-P and Fe-Si-P alloyslink

양홍근; Yang, Hong-Keun; et al, 한국과학기술원, 1981

60
첨가물이 Lithium ferrite 의 소결현상과 B-H loop 성질에 미치는 영향 = The effects of addatives on the sintering behavior and B-H loop properties of lithium ferritelink

김현태; Kim, Hyun-Tae; et al, 한국과학기술원, 1981

61
첨가물이 Ni-Zn ferrite 의 자기적성질과 미세조직에 미치는 영향 = The effects of additives on magnetic properties and microstructure of Ni-Zn ferriteslink

이은구; Lee, Eun-Gu; et al, 한국과학기술원, 1981

62
초저온용 Fe-30Mn-5Al-0.3C-0.1Nb 합금강의 저온인장성질에 미치는 Al 조성의 영향 및 용접성에 관한 연구 = A study on effect of aluminum content on low temperature tensile properties and weldability of cryogenic Fe-30Mn-5Al-0.3C-0.1Nb steellink

이은우; Lee, Eun-Woo; 임호빈; 김영길; et al, 한국과학기술원, 1986

63
탄소가 3% 규소 강판의 2차 재결정에 미치는 영향 = Effects of carbon on the secondary recrystallization in 3 % silicon steellink

송재성; Song, Jae-Sung; 임호빈; 김영걸; et al, 한국과학기술원, 1982

64
플라즈마 화학 증착법으로 제조된 P-doped μc-Si:H 박막의 특성 = Properties of phosphorus-doped μc-Si:H thin films by PECVDlink

이정노; Lee, Jeong-No; et al, 한국과학기술원, 1993

65
플라즈마 화학증착법을 이용한 수소화된 비정질 및 미세결정질 실리콘 박막의 제조 = Deposition of a-Si:H and μc-Si:H thin films by PECVD methodlink

정병후; Jung, Byung-Hoo; et al, 한국과학기술원, 1992

66
하소 및 소결조건이 Mn-Zn-Fe ferrites 의 투자율 및 손실에 미치는 영향 = Effects of calcination and sintering conditions on the permeability and loss of Mn-Zn-Fe ferriteslink

백문철; Paek, Mun-Cheol; 임호빈; 변수일; et al, 한국과학기술원, 1982

67
황함량에 따른 3% 규소철의 제 2 차 재결정에 관한 연구 = The study on the secondary recrystallization in 3% Si-Iron with various sulfur contentslink

박영기; Park, Young-Ki; et al, 한국과학기술원, 1980

68
후막형 $(Bi_{0.7}, Pb_{0.3})Sr_1Ca_1Cu_{1.8}O_x$ 초전도체의 제조 및 소결조건이 초전도성에 미치는 영향 = Effect of sintering conditions on the properties of screen printed $(Bi_{0.7}, Pb_{0.3})Sr_1Ca_1Cu_{1.8}O_x$ superconducting thick filmslink

김혜동; Kim, Hye-Dong; et al, 한국과학기술원, 1991

rss_1.0 rss_2.0 atom_1.0