1 | 2차원 기포상승 시뮬레이션을 위한 이동최소자승법 기반 SPH 모델의 개발 박형준; 이필승, 한국시뮬레이션학회 춘계학술대회, 한국시뮬레이션학회, 2017-04-26 |
2 | 3D extension of the particle-attached element interpolation in Smoothed Particle Hydrodynamics = 입자 부착 요소 보간을 이용한 SPH 밀도 보정의 3차원 확장link Kim, Ji In; Lee, Phill-Seung; et al, 한국과학기술원, 2020 |
3 | 3절점 삼각형 변형률 완화 유한요소에서의 체적 잠김 개선 정훈태; 이필승, 2023 한국전산구조공학회 학술심포지엄, 한국전산구조공학회, 2023-11-17 |
4 | 8절점 솔리드-쉘 유한요소의 개발 성재현; 이필승, 2023 한국전산구조공학회 학술심포지엄, 한국전산구조공학회, 2023-11-17 |
5 | A New Construction Method for Ships and its Feasibility. Zhang, Bilin; Kim, San; 부승환; Cho, SeongPil; 이필승, 2013년도 정기총회 및 추계학술대회 (The Annual Autumn Conference The Society of Naval Architects of Korea, 2013) , pp.743 - 747, 사단법인 대한조선학회(The Society of Naval Architects of Korea), 2013-11-08 |
6 | (A) nodal density based topology optimization with continuous boundary = 연속적인 경계를 가지는 절점밀도 기반 위상 최적화link Lee, Jinhwan; Lee, Phill-Seung; et al, 한국과학기술원, 2021 |
7 | (A) novel bio-machine interface for the behavior modulation of living organism = 생물 행동 조절을 위한 새로운 바이오-기계 인터페이스 개발link Kim, Dae-gun; Lee, Phill-Seung; et al, 한국과학기술원, 2017 |
8 | (A) practical method for evaluating stability of local structures using strain energy variation = 변형에너지 변분을 이용한 국부 구조의 실용적인 안정성 평가 방법link Oh, Min-Han; Lee, Phill-Seung; et al, 한국과학기술원, 2020 |
9 | AMLS 기법으로 계산된 고유치의 오차추정 부승환; 이강헌; 김진균; 이필승, 한국전산구조공학회, 한국전산구조공학회, 2015-04-08 |
10 | BEM-FEM coupling을 통한 수중폭발 버블과 구조물의 상호작용 해석 최형규; 이필승, 2020년도 한국해양과학기술협의회 공동학술대회, 한국해양과학기술협의회, 2020-07-23 |
11 | Case study on damage of coastal structures from Tsunami 이필승, 2013년도 한국방재학회 학술발표대회 논문집, (사)한국방재학회, 2013-02-21 |
12 | Crack detection using machine learning algorithm = 기계학습 알고리즘을 활용한 크랙 진단link Shin, Sojin; Lee, Phill-Seung; et al, 한국과학기술원, 2019 |
13 | Deep learned 2D quadrilateral finite elementslink Jung, Jaeho; Lee, Phill-Seung; et al, 2021 |
14 | Density correction in smoothed particle hydrodynamics and SPH-FEM coupling method for FSI analysislink Seo, Hyun-Duk; Lee, Phill-Seung; et al, 2021 |
15 | Development of a pure bending equipment for measuring the bending behavior of thin films = 박막의 굽힘 거동 측정을 위한 순수 굽힘 장비 개발link Bae, Junhan; Lee, Phill-Seung; et al, 한국과학기술원, 2023 |
16 | Development of advanced metal transfer model for the enhancement of gas metal arc welding process stability = 가스 메탈 아크 용접 공정의 안정성 향상을 위한 진보된 금속 이행 모델의 개발link Kang, Min-Seok; Lee, Phill-Seung; 이필승; Chung, Hyun; et al, 한국과학기술원, 2018 |
17 | Development of continuum mechanics based beam elements for linear and nonlinear analyses of multi-layered composite beam and helically stranded cable structures = 다중 적층빔 및 케이블의 선형 및 비선형 해석을 위한 연속체역학 기반 빔 유한요소의 개발link Kim, Hyo-Jin; Lee, Phill-Seung; et al, 한국과학기술원, 2020 |
18 | Development of efficient numerical methods for the phase field model = 페이즈 필드 모델을 위한 효율적인 수치적 방법 개발link Kim, Gihwan; Lee, Phill-Seung; et al, 한국과학기술원, 2023 |
19 | Development of the layered shell finite element with interlayer slip = 층간 슬립을 고려한 적층 쉘 유한요소 개발link Lee, Juneho; Lee, Phill-Seung; et al, 한국과학기술원, 2021 |
20 | Development of the partition of unity based solid finite elements free from the linear dependence problem = PU 기반 솔리드 유한요소의 개발link Kim, San; Lee, Phill-Seung; et al, 한국과학기술원, 2019 |
21 | Direct imposition of the wall boundary condition in smoothed particle hydrodynamicslink Park, Hyung–Jun; Lee, Phill-Seung; et al, 2021 |
22 | Extended Saint-Venant torsion theory and its application to topology optimization of beams under torsion = 확장된 Saint-Venant 비틀림 이론 및 이를 이용한 비틀림을 받는 빔의 위상 최적화link Lee, Dong-Hwa; Lee, Phill-Seung; et al, 한국과학기술원, 2022 |
23 | FEM의 발전, 성공과 비전 이필승, 전산구조공학, v.33, no.2, pp.1225 - 1569, 2020-06 |
24 | Finite element analysis of 3D printed structures using homogenization and model reduction method = 균질화 기법과 모델 축소 기법을 이용한 3D 프린팅 구조물 유한요소해석link Yoon, DaeHyun; Lee, Phill-Seung; et al, 한국과학기술원, 2022 |
25 | Hydro-elastoplastic analysis of floating plate structures = 부유식 평판 구조물에 대한 유탄소성 해석link Yoon, Joo-Seong; 윤주성; et al, 한국과학기술원, 2017 |
26 | Hydroelastic analysis of floating structures subjected to underwater explosive bubbles = 수중 폭발을 고려한 부유식 구조물의 유탄성 해석link Choi, Hyunggyu; Lee, Phill-Seung; et al, 한국과학기술원, 2019 |
27 | Impact response analysis of a floating plate considering hydro-elastoplasticity 윤주성; 이필승, 대한기계학회 CAE 및 응용역학부문 2016년도 춘계학술대회, 대한기계학회, 2016-04-07 |
28 | Improvement of 2D-MITC4 solid and MITC4+ shell finite elements = 2D-MITC4 솔리드 및 MITC4+ 쉘 유한요소의 개선link Choi, Hyung-Gyu; Lee, Phill-Seung; et al, 한국과학기술원, 2023 |
29 | Improvement of a 3-node triangular shell finite element using strain smoothing technique = 변형률 평활화 기법을 이용한 3절점 삼각형 쉘 유한요소의 개선link Lee, Chaemin; Lee, Phill-Seung; et al, 한국과학기술원, 2017 |
30 | Improving the Dual Craig-Bampton Method Using Higher-order Residual Flexibilities 김정호; 이필승, 대한기계학회 CAE 및 응용역학부문 2016년도 춘계학술대회, 대한기계학회, 2016-04-07 |
31 | Improving the model reduction method based on multilevel substructuring for structural dynamic analysis = 구조 동역학 해석을 위한 다중 레벨 부구조화법 기반 모델축소기법의 개선link Hyun, Cheolgyu; Lee, Phill-Seung; et al, 한국과학기술원, 2018 |
32 | Load balancing for parallel multilevel substructuring and coarse mesh projection for nonlinear model reduction = 병렬 다중 레벨 부구조법의 부하 분산 및 비선형 모델 축소를 위한 성긴 격자 투영link Hyun, Cheolgyu; Lee, Phill-Seung; et al, 한국과학기술원, 2022 |
33 | LS-DYNA를 이용한 원자력발전소의 로드블록에 대한 차량 충돌 시뮬레이션 이승규; 김동욱; 이필승, 한국전산구조공학회논문집, v.36, no.2, pp.113 - 120, 2023-04 |
34 | Modeling of contact between beams with arbitrary cross-sections = 임의 단면을 가진 빔 간의 접촉 거동 모델링link Jung, Hoon Tae; Lee, Phill Seung; et al, 한국과학기술원, 2017 |
35 | Modeling of helically stranded cables using multiple beam finite elements and its application to cable design = 다중 보 유한요소를 이용한 케이블의 모델링 방법 및 이를 이용한 케이블 설계link Kim, Sung Yun; 김성윤; et al, 한국과학기술원, 2017 |
36 | MOORING SYSTEM FOR A VESSEL AND FLATING STRUCTURE, MOBILE HARBOR AND QUAY USING IT 이필승; 한순흥; 정현; 김용욱; 최국진; 김상일; 조영희; et al, 2014-12-10 |
37 | MOORING SYSTEM FOR A VESSEL AND FLATING STRUCTURE, MOBILE HARBOR AND QUAY USING IT 이필승; 한순흥; 정현; 김용욱; 최국진; 김상일; 조영희; et al, 2014-12-10 |
38 | Numerical methods for hydro -static and -dynamic analysis of 3D elastic floating structures = 3차원 탄성 부유체의 정적/동적 해석을 위한 수치해석 기법 개발link Lee, Kang-Heon; 이강헌; et al, 한국과학기술원, 2016 |
39 | Numerical simulation of underwater explosion using smoothed particle hydrodynamics = 입자법을 이용한 수중폭발 수치해석 시뮬레이션link Park, Hyung Jun; Lee, Phill-Seung; et al, 한국과학기술원, 2017 |
40 | On the model reduction methods for dynamic analysis of large finite element models = 대형 유한요소모델의 동적 해석을 위한 모델축소기법에 관한 연구link Boo, Seung Hwan; 부승환; et al, 한국과학기술원, 2016 |
41 | On the model reduction methods with free-interface substructuring for dynamic analysis = 동적 해석을 위한 자유단 경계 기반의 부구조를 갖는 모델 축소 기법link Kim, Jeong-Ho; Lee, Phill-Seung; et al, 한국과학기술원, 2018 |
42 | PU 기반 유한요소법을 이용한 평면 응력 문제의 고유치 해석 김산; 이필승, 대한기계학회 CAE 및 응용역학부문 2017년도 춘계학술대회, 대한기계학회, 2017-05-25 |
43 | Remote guidance system for turtle and carp by controlling voluntary instinctive behavior = 자발적 본능행동 제어를 통한 거북과 잉어 원격 유도 시스템 개발link Kim, Cheol-Hu; 김철후; et al, 한국과학기술원, 2016 |
44 | Research trends of structural damage assessment against Tsunami 김진영; 김용욱; 이필승, 2013년도 한국해양과학기술협의회 공동학술대회, 한국해양과학기술협의회, 2013-05-23 |
45 | Simple solution to the linear dependence problems of partition of unity-based FEM 김산; 이필승, 대한기계학회 CAE 및 응용역학부문 2016년도 춘계학술대회, 대한기계학회, 2016-04-07 |
46 | Simulation of explosive gas bubbles under zero gravity using Boundary Element Method 박형준; 이필승, 2017 함정기술·무기체계 세미나, 대한민국해군, 2017-10-26 |
47 | SPH 기법을 이용한 2차원 댐 붕괴 문제의 압력 추정에 관한 연구 서현덕; 이필승, 한국시뮬레이션학회 춘계학술대회, 한국시뮬레이션학회, 2017-04-26 |
48 | SPH를 이용한 정수압 해석에 관하여 정윤승; 이필승, 2023 한국전산구조공학회 학술심포지엄, 한국전산구조공학회, 2023-11-17 |
49 | Strain-smoothed element method for improving low-order solid and shell finite elements = 저차 솔리드 및 쉘 유한요소의 향상을 위한 변형률 완화 요소법link Lee, Chaemin; Lee, Phill-Seung; et al, 한국과학기술원, 2020 |
50 | Thermoelastic and thermomechanical contact analysis using polyhedral smoothed finite elements = 다면체 완화 유한요소를 이용한 열탄성 및 열-기계적 접촉 해석link Kim, Hobeom; Lee, Phill-Seung; 이필승; Im, Seyoung; et al, 한국과학기술원, 2019 |
51 | Two challenges in ocean systems engineering 이필승, International Forum on Electric Vehicle 2012, the Cho Chun Shik Graduate School for Green Transportation, KAIST, 2012-11-07 |
52 | Two-dimensional crack analysis using the extended finite element method with polynomial enrichment technique = 다항식 강화 기법이 적용된 확장유한요소법을 이용한 2차원 균열 해석link Kim, Gihwan; Lee, Phill-Seung; et al, 한국과학기술원, 2018 |
53 | 가변 펜더를 구비하는 접안 장치와 접안장치가 장착된 부유체 및 이동항구 윤정혁; 이필승; 한순흥; 정현; 김용욱; 최국진; 김상일; et al |
54 | 고유재조합법을 이용한 티모샌코빔 요소의 비선형 해석 성능 향상 윤경호; 김효진; 김도년; 이필승, 한국전산구조공학회, 한국전산구조공학회, 2015-04-08 |
55 | 공리설계를 이용한 반잠수식 모바일하버의 개념설계 이주희; 윤성진; 정현; 이필승, 한국CAD/CAM학회 논문집, v.15, no.3, pp.189 - 203, 2010-06 |
56 | 구조 동역학 해석을 위한 EAMLS 기법의 전산 효율성 개선 현철규; 부승환; 이필승, 대한기계학회 CAE 및 응용역학부문 춘계 학술대회, 대한기계학회, 2018-04-26 |
57 | 구조물의 탄성효과를 고려한 2차원 댐 붕괴 문제의 SPH-FEM 연동해석 기법에 대한 연구 서현덕; 이필승, 대한기계학회 CAE 및 응용역학부문 2017년도 춘계학술대회, 대한기계학회, 2017-05-25 |
58 | 국내외 해양원자력 시스템 개발현황 및 전망 이필승, 2014 한국해양과학기술협의회 공동학술대회, 한국해양과학기술협의회, 2014-05-23 |
59 | 금속포일 전기증발을 사용한 무폭약 수중 충격 장치 및 방법 이필승; 나양섭; 조정희; 이승규; 김형준; 정현; 박규동; et al |
60 | 기계학습 기반 트러스 구조물의 비선형 해석 신소진; 이필승, 2022 한국전산구조공학회 학술심포지엄, 한국전산구조공학회, 2022-11-24 |