1 | 2½-차원 물체상 공혈 위치 인식을 위한 영상처리 방법연구 = Image processing for hole position recognition on 2½-dimensional objects for assembly robotlink 최용원; Choi, Yong-Won; et al, 한국과학기술원, 1985 |
2 | 2개의 김벌을 가지는 대칭 동조자이로의 설계인자 변화에 따른 편류오차 해석 = Drift error analysis of two gimbal type symmetric dynamically tuned gyroscope(DTG) with design parameter variationlink 이관섭; Lee, Kwan-Sup; et al, 한국과학기술원, 1995 |
3 | 2자유도 병렬 매니퓰레이터의 모형화 및 슬라이딩 모드 제어 = Modeling and sliding mode control of the two degree-of-freedom parallel manipulatorlink 신재철; Shin, Jae-Cheol; et al, 한국과학기술원, 1997 |
4 | 6-3 스튜워트 플랫폼 운동장치의 운동방정식 해석 김낙인; 이종원, 대한기계학회논문집 A, v.25, no.11, pp.1820 - 1828, 2001-01 |
5 | (A) microcomputer based industrial eye for positioning and centering of holes = 원공 중심을 찾아가는 마이크로 컴퓨터에 의한 산업눈link Ha, Sung-Do; 하성도; et al, 한국과학기술원, 1985 |
6 | (A) theory of excitation and measurement for modal testing of rotating machinery = 회전 기계의 모드 시험을 위한 가진 및 측정 이론link Kwon, Kye-Si; 권계시; et al, 한국과학기술원, 1999 |
7 | Adaptive control of electro-magnetic type active engine mount = 전자석 구동형 능동 엔진 마운트의 적응제어link Lee, Yong-Wook; 이용욱; et al, 한국과학기술원, 2002 |
8 | Application of forecasting and discrete optimal controls to a servo-damper system = 예측 제어와 이산 최적 제어 이론의 서어보 감쇠계에서의 응용link Kang, Min-Sik; 강민식; et al, 한국과학기술원, 1983 |
9 | Application of forecasting compensatory control to reduce surface irregularities in metal cutting = 절삭 작업시 표면 조도 개선을 위한 예측 보상 제어의 응용link Ji, Jeong-Beom; 지정범; et al, 한국과학기술원, 1984 |
10 | Asymptotic behavior of root-loci in multivariable systems = 다변수 계에서의 근궤적의 점근 운동link Lee, Sung-Won; 이성원; et al, 한국과학기술원, 1981 |
11 | Automatic modal balancing of flexible rotors during operation by using a single balancing head = 단일면 밸런싱 장치를 이용한 탄성회전체의 운전중 자동 모우드 밸런싱link Kim, Young-Dae; 김영대; et al, 한국과학기술원, 1985 |
12 | Automatic single plane balancing of a rigid rotor using an electromagnetic balancing head = 전자식 밸런싱 장치를 이용한 강성회전체의 자동 단일면 밸런싱link Hong, Seong-Wook; 홍성욱; et al, 한국과학기술원, 1985 |
13 | Bending vibration of a fluid-conveying tubular cantilever with a nozzle = 노즐단을 가진 원형관의 유체 유동에 의한 진동 해석link Heo, Joo-Ho; 허주호; et al, 한국과학기술원, 1983 |
14 | Blade Vibration Analysis and Pitch Control of Large-scale Wind Turbines = 대형 풍력 터빈의 블레이드 진동 해석 및 피치 제어link Kim, Kyung-Taek; 김경택; et al, 한국과학기술원, 2008 |
15 | $CH_4$ / Air / $CO_2$ 대향류 확산화염에 대한 실험적 연구 = An experimental study on the $CH_4$ / Air / $CO_2$ counterflow diffusion flamelink 이종원; Lee, Chong-Won; et al, 한국과학기술원, 2001 |
16 | Complex Modal Testing of Asymmetric Rotors Using Magnetic Exciter Equipped with Hall Sensors 이종원; 김시경, 대한기계학회 영문 논문집, v.15, no.7, pp.866 - 875, 2001-01 |
17 | Complex model testing and parameter dentification of rotor-bearing systems = 회전체 베어링계의 복소 모우드 시험 및 매개변수 추출link Joh, Young-Don; 조영돈; et al, 한국과학기술원, 1992 |
18 | Complex time series analysis for rotor dynamics identification and fault diagnosis = 복소 시계열에 의한 회전체의 동특성 규명 및 결함 진단link Park, Jong-Po; 박종포; et al, 한국과학기술원, 1996 |
19 | Complex-model-space control of rotating disk vibrations = 회전원판 진동의 복소 모우드 제어link Byun, Seung-Wan; 변승완; et al, 한국과학기술원, 1988 |
20 | Composite position control of two-link flexible manipulator employing nonlinear decoupling method = 비선형 비연성법을 이용한 2관절 유연매니퓰레이터의 복합위치제어link Lee, Sang-Ho; 이상호; et al, 한국과학기술원, 2001 |
21 | Control of hybrid-type three-pole active and permanent magnetic bearing system using redundant coordinates = 잉여좌표계를 이용한 3극 전자기 및 영구자석 복합 베어링계의 제어link Park, Sang-Hyun; 박상현; et al, 한국과학기술원, 2010 |
22 | Controller design for a magnetically suspended milling spindle based on chatter stability analysis = 채터 안정도 해석에 근거한 자기베어링 밀링 주축의 제어기 설계link Kyung, Jin-Ho; 경진호; et al, 한국과학기술원, 2003 |
23 | Coupled bending vibration analysis of flexible rotors by using the assumed modes and substructure synthesis method = 가정 모드 및 부분 구조 합성법을 이용한 탄성 회전체의 연성 굽힘 진동 해석link Chun, Sang-Bok; 전상복; et al, 한국과학기술원, 1996 |
24 | DDC방식에 의한 공작기계 절삭 특성 규명 변승완; 이종원, 대한기계학회논문집 A, v.5, no.4, pp.303 - 311, 1981 |
25 | DDS 방법을 이용한 실제 절삭 작업하의 절삭 다이나믹스 규명 = Identification of cutting dynamics under actual working conditions using DDS methodologylink 변승완; Byun, Seung-Wan; et al, 한국과학기술원, 1981 |
26 | Demensional measurement of 3-D objects through stereometric image processing = 두 대의 영상처리를 이용한 3차원 물체 측정방법 개발link Lim, Kyong-Chan; 임경찬; et al, 한국과학기술원, 1985 |
27 | Design and axial position control of a small-sized active magnetic bearing with non-laminated core = 비적층 코어를 갖는 소형 전자기 베어링 설계 및 축 방향 위치 제어link Kim, Ha-Yong; 김하용; et al, 한국과학기술원, 2004 |
28 | Design and position control of a disk type integrated motor-bearing system = 원판형 자기베어링 내장 전동기의 설계 및 반경방향 위치제어link Han, Woo-Sup; 한우섭; et al, 한국과학기술원, 2000 |
29 | Design of Lorentz force-type integrated motor-bearing system using permanent magnets and concentrated windings = 영구자석 및 집중권선을 이용한 자기베어링 내장 전동기의 설계link Park, Sung-Ho; 박성호; et al, 한국과학기술원, 2006 |
30 | Detection of breathing crack in rotor system from the directional frequency response functions and dynamic stiffnesses = 방향성 주파수 응답 함수와 동적 강성을 이용한 회전체 개폐 균열의 탐지link Kang, Sung-Woo; 강성우; et al, 한국과학기술원, 2010 |
31 | Determination of optimal firing intervals in multiple rocket launcher = 다연장포의 최적 발사시간 간격의 결정link Han, Man-Cheol; 한만철; et al, 한국과학기술원, 1983 |
32 | Development of a decoupled acoustic guitar using electro-dynamic actuator = 전동식 구동기를 이용한 비연성 통기타 개발link Lee, Byung-Joo; 이병주; et al, 한국과학기술원, 2010 |
33 | Development of a low-cost industrial eye that recognizes the position and size of drilled holes = 가공된 원공의 내경 및 위치를 인식하는 저렴한 Industrial Eye 의 개발link Chung, Won-Jee; 정원지; et al, 한국과학기술원, 1984 |
34 | Development of modal testing and SDM techniques = 모우드 시험 및 동적 설계 변경 기술의 개발link Chung, Kyung-Ryul; 정경렬; et al, 한국과학기술원, 1983 |
35 | Diagnosis of anisotropy and asymmetry in rotating machinery via directional spectral analysis = 방향스펙트럼해석에 의한 회전체의 비등방성 및 비대칭성 진단link Joh, Chee-Young; 조치영; et al, 한국과학기술원, 1993 |
36 | Directional spectral analysis of transient vibration signals from rotating machines = 회전 기계 과도 진동 신호의 방향성 스펙트럼 해석link Han, Yun-Sik; 한윤식; et al, 한국과학기술원, 1998 |
37 | Dynamic analysis and isotropic optimal control of active magnetic bearing system = 능동 자기베어링 계의 동적 해석 및 등방 최적제어link Kim, Cheol-Soon; 김철순; et al, 한국과학기술원, 1995 |
38 | Dynamic analysis and robust motion control of frictionless positioning device suspended by cone-shaped active magnetic bearings = 원추형 자기 베어링 지지 무마찰 구동장치의 동적해석 및 강인 위치제어link Jeong, Ho-Seop; 정호섭; et al, 한국과학기술원, 1997 |
39 | Dynamic analysis of bladed-rotor systems based on complex modal analysis theory = 복소 모드 해석 이론에 기반한 회전익 회전체의 동적 해석link Kim, Kyung-Taek; 김경택; et al, 한국과학기술원, 2013 |
40 | Dynamic behavior of a rotating shaft containing a breathing crack = 개폐균열을 갖는 회전축의 동적거동link Jun, Oh-Sung; 전오성; Lee, Chong-Won; Eun, Hee-Joon; et al, 한국과학기술원, 1991 |
41 | Earth Penetrator해석을 위한 근사해법의 개발 김영대; 이종원, 한국항공우주학회지, v.11, no.1, pp.63 - 72, 1983-06 |
42 | Error analysis and directional frequency response estimation for design and error compensation of dynamically tuned strapdown gyroscope = 스트랩다운 동조 자이로의 설계 및 오차 보정을 위한 오차 해석 및 방향성 주파수 응답함수의 추정link Lee, Seok-Ku; 이석구; et al, 한국과학기술원, 1997 |
43 | Fuzzy logic control algorithm for multi-objective problem by using orthogonal array and its applications = 직교배열표를 이용한 다목적 퍼지제어 알고리즘 및 응용link Kim, Choo-Ho; 김추호; et al, 한국과학기술원, 2002 |
44 | Generalized minimum variande control with input variance constraint and its application to a hydraulic servo-damper system = 입력분산 제한을 갖는 일반최소분산제어 및 유압구동 서어보 감쇠계에의 응용link Kang, Min-Sig; 강민식; et al, 한국과학기술원, 1987 |
45 | Geometric adaptive straightness control in the CNC end milling machine = 기하학적 적응제어에 의한 수치제어 엔드밀링 공정에서의 직진도 개선link Chung, Sung-Chong; 정성종; et al, 한국과학기술원, 1987 |
46 | Geometrical adaptive control of machining straightness in end milling = 엔드 밀링 작업에서의 진직도 개선을 위한 기하학적 적응 제어link Kim, Jong-Sun; 김종선; et al, 한국과학기술원, 1985 |
47 | $H_∞$ robust control of flexible manipulator vibration = 유연조작기 진동의 $H_∞$ 강건제어link Jee, Won-Ho; 지원호; et al, 한국과학기술원, 1994 |
48 | Helmholtz 분석방정식을 이용한 임의 형상 음원의 재현과 음장 예측 = Abitrarily-shaped sound source reconstruction and field prediction using the helmholtz integral equationlink 김규태; Kim, Gyu-Tae; 이종원; 이병호; et al, 한국과학기술원, 1989 |
49 | Identification and dynamic reanalysis of vibrating structures by modal analysis = 모우드해석을 이용한 진동구조물의 동특성 규명 및 재해석link Chung, Kyung-Ryul; 정경렬; et al, 한국과학기술원, 1987 |
50 | Identification of anisotropy and asymmetry in flexible rotor systems using directional frequency response functions = 방향성 주파수 응답 함수를 이용한 유연 회전체의 비등방성 및 비대칭성 규명link Seo, Yun-Ho; 서윤호; Lee, Chong-Won; 이종원; et al, 한국과학기술원, 2009 |
51 | Identification of bearing dynamic coefficients by unbalance response measurements in rotor bearing systems = 불균형 응답을 이용한 회전체 베어링계의 베어링 동적 계수 규명link Hong, Seong-Wook; 홍성욱; et al, 한국과학기술원, 1989 |
52 | Identification of in-plane force in outer-clamped annular plates by using modal parameters = 모우드 매개변수를 이용한 외주고정 환형판의 평면력 규명link Rim, Kyung-Hwa; 임경화; et al, 한국과학기술원, 1992 |
53 | Identification of travelling wave modes in rotating disk via directional spectral analysis = 방향 스펙트럼 해석에 의한 회전 원판의 진행파 모드 규명link Kim, Myeong-Eop; 김명업; et al, 한국과학기술원, 1995 |
54 | Identification of vibrational modes of rotating rigid shaft-flexible support system with multiple flexible disks = 다중탄성 원판을 가진 강체회전축-탄성지지계의 진동모드 규명link Ham, Jong-Seok; 함종석; et al, 한국과학기술원, 1999 |
55 | In-situ parameter identification and optimal unbalance control of active magnetic bearing system = 능동 자기 베어링 시스템의 운전중 매개 변수 규명 및 최적 불균형 제어link Ha, Young-Ho; 하영호; et al, 한국과학기술원, 1996 |
56 | LMS 알고리듬을 이용한 하중계 내장형 능동 자기베어링 시스템의 운전중 위치 및 전류 강성계수 규명 김승종; 이종원, 대한기계학회논문집 A, v.A22, no.12, pp.2261 - 2268, 1998-12 |
57 | LMS 알고리즘을 이용한 전자기 베어링계에서의 런아웃, 불균형력 및 와전류 효과 규명 김하용; 김승종; 이종원, 한국소음진동공학회 2001년도 춘계학술대회, pp.172 - 177, 한국소음진동공학회, 2001-05 |
58 | Machine tool dynamics modification via experimental modal analysis = 실험적 모우드해석을 이용한 공작기계의 동특성 개선link Jei, Yang-Gyu; 제양규; et al, 한국과학기술원, 1983 |
59 | Magneto-rheological fluid based squeeze film damper for semi-active unbalance response control of rotor = 회전체의 불균형 응답 제어를 위한 자기유변유체를 이용한 스퀴즈 필름 댐퍼link Kim, Keun-Joo; 김근주; et al, 한국과학기술원, 2005 |
60 | Modal analysis of asymmetric rotor with anisotropic stator using modulated coordinates = 변조좌표계를 활용한 비대칭/비등방 회전체의 모드해석기법link Suh, Jeong-Hwan; 서정환; et al, 한국과학기술원, 2004 |