1 | 2-단유압 릴리이프 밸브의 특성해석에 관한 연구 = A study on the characteristic analysis of a two-stage hydraulic relief valvelink 윤재호; Yun, Jae-Ho; et al, 한국과학기술원, 1980 |
2 | 2단 압력조절 밸브에 대한 정력학적 동력학적 분석 = Static and dynamic analysis of a two-stage relief valvelink 신영철; Shin, Yung-Chul; et al, 한국과학기술원, 1978 |
3 | 3-루프 제어기를 적용한 공기압 서보 위치 제어 시스템에서의 퍼지 게인 조정기의 설계 및 응용에 관한 연구 = Applications of a fuzzy gain adapter to the three loop position control of a pneumatic servo systemlink 전용수; Jeon, Yong-Soo; et al, 한국과학기술원, 1997 |
4 | (A) study on analysis and design of a poppet type electropneumatic servovalve = 포핏형 전자식 공기압 서보밸브의 해석 및 설계에 관한 연구link Choi, Seo-Ho; 최서호; Cho, Hyung-Suck; Lee, Chung-Oh; et al, 한국과학기술원, 2000 |
5 | Adaptive sliding mode control을 이용한 전기유압식 서어보시스템의 위치제어에 관한 연구 = A study on the position control of electrohydraulic servo system using adaptive sliding mode controllink 현장환; Hyun, Jang-Hwan; et al, 한국과학기술원, 1994 |
6 | Analysis of solenoid of a hydraulic proportional compound valve = 비례복합밸브내의 솔레노이드에 관한 해석link Um, Tai-Joon; 엄태준; et al, 한국과학기술원, 1979 |
7 | Annular heat pipe 의 성능에 관한 연구 = Study on the performance of an annular heat pipelink 백제현; Baek, Je-Hyun; et al, 한국과학기술원, 1975 |
8 | Frame analysis structural design system = 콤퓨터를 이용한 구조해석 및 설계link O, Hung-Kuk; 오흥국; et al, 한국과학기술원, 1976 |
9 | Gyromill 풍차의 효율해석과 모델 연구 = Analysis of the performance of gyromill-rotor and model studylink 김희식; Kim, Hee-Sik; et al, 한국과학기술원, 1979 |
10 | Measurement of thermal diffusivity of ion nitrided steel by flash method = 섬광 열확산 방법에 의한 이온 질화강의 열확산 계수 측정link Lee, Sang-Kil; 이상길; Lee, Chung-Oh; Lee, Hung-Joo; et al, 한국과학기술원, 1979 |
11 | Optimization of control parameters for fluid power systems by genetic algorithms = 유전 알고리즘을 이용한 유공압 시스템 제어 파라미터 최적화link Ahn, Choul-Hyun; 안철현; et al, 한국과학기술원, 1996 |
12 | Performance of annular heat pipe and optimization of heat recovery unit with heat pipes = 환상 열파이프의 특성 및 열파이프를 응용한 열회수장치의 최적화에 관한 연구link Song, Tae-Ho; 송태호; et al, 한국과학기술원, 1979 |
13 | Platen-munters 형 흡수식 냉동기의 최적 설계 = A study on the optimization of absorption refrigerating system of platen-munters typelink 이재효; Lee, Jai-Hou; et al, 한국과학기술원, 1977 |
14 | Plunger의 Stroke에 무관하게 일정한 힘을 주는 Solenoid의 연구. 이대길; 권대갑; 이정오, 새물리, v.17, no.4, pp.208 - 217, 1977-12 |
15 | Prototype 이온 질화 장치 개발 연구 = Development of pilot type ion-nitriding systemlink 김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1979 |
16 | TDC 이론을 이용한 유공압 시스템의 위치 제어 및 유압 시스템의 안정성 해석 = Fluid power control using time delay control and stability analysis of nonlinear hydraulic systemslink 진성무; Chin, Seong-Mu; et al, 한국과학기술원, 1995 |
17 | V 홈이 파진 실린더가 회전할 때 발생하는 vortex 현상의 유한요소해석 = Finite elememt analysis of vortex motion induced by rotating V-grooved cylinderlink 이승구; Leigh, Seung-Kuh; et al, 한국과학기술원, 1979 |
18 | 가변 유압 모터를 이용한 전기유압식 속도 서보 시스템의 동특성 해석및 제어 = Dynamic analysis and control of an electrohydraulic speed servo system using variable displacement motorlink 김철수; Kim, Chul-Soo; et al, 한국과학기술원, 1996 |
19 | 개폐식 밸브를 사용한 공압 서보 시스템의 효율적 밸브 개폐에 관한 연구 = Study on the effective operating method of on-off valves for a pneumatic servo systemlink 황웅태; Hwang, Woong-Tae; et al, 한국과학기술원, 1997 |
20 | 개폐식밸브를 이용한 공압실린더의 위치제어에 관한 연구 = A study on position servo control for pneumatic cylinder using solenoid switching valveslink 갈명준; Kal, Myung-Joon; et al, 한국과학기술원, 1991 |
21 | 고체 봉이 들어 있는 무한 액주의 불안정 = Instability of an infinite liquid cylinder with a solid wire in itlink 이진원; Lee, Jin-Won; et al, 한국과학기술원, 1977 |
22 | 공기압 서보 시스템의 위치 제어 및 시뮬레이션에 관한 연구 = A study on the position control and simulation of pneumatic sevo systemlink 최서호; Choi, Seo-Ho; et al, 한국과학기술원, 1995 |
23 | 공기압 서보 시스템의 위치제어 성능 향상을 위한 밸브 개폐 알고리듬에 관한 연구 = A study on the valve-operating algorithm for improving the position control of pneumatic servo systemlink 최재석; Choi, Jae-Suck; 조형석; 이정오; et al, 한국과학기술원, 1999 |
24 | 공압 3축 매니퓰레이터의 위치제어에 관한 연구 = A study on the position control of a pneumatic SCARA manipulatorlink 전용원; Jeon, Yong-Won; et al, 한국과학기술원, 1994 |
25 | 굴삭기의 유압회로 해석 및 하강주행의 안정성연구 = Hydraulic circuit analysis of an EXCAVATOR and stability study in a declining attitudelink 김철수; Kim, Cheol-Soo; et al, 한국과학기술원, 1980 |
26 | 냉동기의 성능 예측에 관한 연구 = A study on the performance simulation of a refrigeration systemlink 최상민; Choi, Sang-Min; et al, 한국과학기술원, 1977 |
27 | 냉장고 자동온도조절기의 설계 = Design of a thermostat for refrigeratorlink 이준원; Lee, Jun-Weon; et al, 한국과학기술원, 1977 |
28 | 능동식 현가시스템용 전자비례 유압 감압밸브의 해석 및 설계에 관한 연구 = Dynamic analysis and design of an electro-hydraulic pressure reducing valve for active suspension systemslink 이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1997 |
29 | 능동식 현가장치용 유압시스템에 관한 연구 = A study on the hydraulic system for active suspensionlink 전용수; Jeon, Young-Soo; et al, 한국과학기술원, 1992 |
30 | 디젤엔진에서 연료분사기구의 시믈레이션 = Simulation of fuel injection system in a diesel enginelink 김영석; Kim, Young-Suck; 이정오; 박희용; et al, 한국과학기술원, 1979 |
31 | 레이디얼 피스톤 유압모타의 효율과 성능 특성 = Hydraulic radial piston motor efficiency and performance characteristiclink 김형의; Kim, Hyoung-Wei; et al, 한국과학기술원, 1980 |
32 | 부레쉬레스 풍차 발전기의 성능해석 = Performance analysis of the self-excited brushless windmill-generatorlink 조규종; Cho, Kyu-Zong; et al, 한국과학기술원, 1976 |
33 | 부하 시뮬레이터의 힘 및 위치제어에 관한 연구 = Study on force and position control of load simulatorlink 이정철; Lee, Jung-Chul; et al, 한국과학기술원, 1994 |
34 | 비례 복합 밸브 내의 솔레노이드의 특성에 관한 연구 = Study on the solenoid characteristics of a hydraulic proportional compound valvelink 이대길; Lee, Dai-Gil; et al, 한국과학기술원, 1977 |
35 | 사판식 가변유압펌프의 전기유압식제어에 관한 연구 = Electro-hydraulic control of a variable displacement axial piston pumplink 현장환; Hyun, Jang-Hwan; 조형석; 이정오; et al, 한국과학기술원, 1999 |
36 | 성형 사출기의 공정제어에 관한 연구 = A study on process control of the injection molding machinelink 정연규; Chung, Yeon-Gyu; et al, 한국과학기술원, 1979 |
37 | 수직축 풍력 발전기의 특성 해석 = Performance analysis of a vertical axis wind turbinelink 김광호; Kim, Kwang-Ho; et al, 한국과학기술원, 1979 |
38 | 압력 보상 유량 제어 밸브의 동특성에 관한 연구 = Study on the dynamic characteristics of a pressure compensated flow control valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1976 |
39 | 연탄을 사용하는 온풍로에서의 열전달에 관한 연구 = A study on the heat transfer characteristics of a warm-air-furnace firing briquettelink 김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1977 |
40 | 원통형 이온질화 피처리물의 온도특성 = Temperature characteristics of a cylindrical workpiece in ion-nitriding processlink 임윤철; Rhim, Youn-Chul; et al, 한국과학기술원, 1980 |
41 | 유기압 현수장치의 감쇄 및 공압 스프링 특성에 관한 연구 = Study on the damping and the spring characteristic of a hydropneumatic suspension unitlink 주상현; Joo, Sang-Hyun; et al, 한국과학기술원, 1993 |
42 | 유압 구동식 사출기에서의 배압의 효과 = Effect of back pressure of a plastic reciprocating screw injection-molding machinelink 이성래; Lee, Seong-Rae; et al, 한국과학기술원, 1979 |
43 | 유압 디지탈 서보 실험 장치의 구성 및 압력 궤환을 이용한 유압 모터의 위치 제어 = A study on the design of a digital electrohydraulic servomechanism and the position control of the servo system using inner pressure control looplink 임상묵; Lim, Sang-Mook; et al, 한국과학기술원, 1995 |
44 | 유압 비례 복합 밸브의 릴리프 특성에 관한 연구 = Pressure relief characteristics of a hydraulic proportional compound valvelink 이윤정; Lee, Yoon-Jung; et al, 한국과학기술원, 1978 |
45 | 유압 비례 복합 제어밸브의 압력제어 특성에 관한 연구 = Pressure-relief characteristics of a hydraulic proportional compound valvelink 박석호; Park, Seok-Ho; et al, 한국과학기술원, 1980 |
46 | 유압비례 복합 밸브에서의 솔레노이드로 작동되는 감압밸브의 성능에 관한 연구 = Performance of a solenoid-operated, pressure reducing valve of a hydraulic proportional compound valvelink 이석희; Lee, Seok-Hee; et al, 한국과학기술원, 1978 |
47 | 유압비례복합밸브의 유량 및 압력제어 성능에 관한 연구 = Flow and pressure control performance of a hydraulic proportional compound valvelink 권대갑; Kwon, Dae-Khapp; et al, 한국과학기술원, 1977 |
48 | 유체력을 이용한 유량 조절 밸브의 해석과 설계 = Analysis and design of a flow control valve using flowforcelink 배상기; Bae, Sang-Gie; et al, 한국과학기술원, 1997 |
49 | 유한요소법을 사용한 보강된 풍차날개에 대한 응력해석 = Stress analysis of a reinforced windmill propeller using finite element methodlink 최동훈; Choi, Dong-Hoon; 이병호; 이정오; et al, 한국과학기술원, 1977 |
50 | 이온 질화 피처리물의 온도 특성 = Temperature characterstics of ion-nitrided workpiecelink 유성연; Yoo, Seong-Yeon; et al, 한국과학기술원, 1979 |
51 | 이온 질화에 관한 연구 = A study on ion nitridinglink 서진석; Seo, Jin-Seok; et al, 한국과학기술원, 1978 |
52 | 이온질화에 있어 탄소량의 영향과 이온질화강의마모특성 = Carbon effects in ion-nitriding and wear characteristics of ion-nitrided steellink 조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1979 |
53 | 자석을 이용한 유압조절 벨브에 관한 연구 = Study on a magnet-coupled hydraulic relief valvelink 조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1976 |
54 | 저가의 공압제어 시스템 구성과 그 위치제어에 관한 연구 = On the construction and position control of low cost pneumatic positioning systemslink 홍지중; Hong, Ji-Joong; et al, 한국과학기술원, 1992 |
55 | 전기 유압식 서어보 인덱싱 시스템의 위치 제어및 관성 부하 시뮬레이터에 관한 연구 = A study on the position control of electrohydraulic servo indexing system and inertia load simulatorlink 안경관; Ahn, Kyoung-Kwan; et al, 한국과학기술원, 1992 |
56 | 전기 유압식 서어보 인덱싱 시스템의 적응제어에 관한 연구 = A study on the adaptive control of electro-hydraulic servo indexing systemlink 홍성철; Hong, Seong-Cheol; et al, 한국과학기술원, 1991 |
57 | 전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980 |
58 | 주퇴복좌시스템에 관한 연구 = Study on a coneentric-hydro-spring type recoil systemlink 이동호; Lee, Dong-Ho; et al, 한국과학기술원, 1975 |
59 | 지게차의 유압회로 해석 및 하강 조절 밸브의 동특성 연구 = An analysis and design of FD 50 M fortlift and the dynamic characteristics of down control valve on hunting phenomenon in the lift cylinderlink 이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1980 |
60 | 특수 차량의 동적 특성에 관한 연구 = A study on a dynamic characteristics of a special vehicle systemlink 나문수; Na, Moon-Soo; et al, 한국과학기술원, 1976 |