Browse "ME-Theses_Master(석사논문)" by Issue Date 

Jump to a point in the index:

Showing results 1 to 20 of 3882

1
풍차용프로펠러 및 핏치조정장치에 관한 연구 = Study on the propeller and its pitch control systemlink

이세창; Lee, Sei-Chang; et al, 한국과학기술원, 1975

2
Design and fabrication of the manual-rice-transplanter, and its linkage synthesis and analysis = 수도 이앙기의 설계및 제작과 이의 링키이지 종합 및 해석link

Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1975

3
Derivation of mapping fucntions for regions with N-axes of symmetry and its application to stress analysis = 대칭성 도형의 Mapping 함수의 유도와 응력 해석에의 응용link

Kim, Kil-Soo; 김길수; et al, 한국과학기술원, 1975

4
주택난방의 열효율에 관한 연구 = A study on the thermal efficiency of the house heating systemlink

강신형; Kang, Shin-Hyoung; et al, 한국과학기술원, 1975

5
컴퓨타에 의한 공기조화부하계산 = Heating-cooling load calculation by computerlink

김두천; Kim, Doo-Chun; et al, 한국과학기술원, 1975

6
小形 Spin 安定型 球形로켓트에 關한 硏究 = Study on a small spin-stabilized spherical rocketlink

이종훈; Lee, Chong-Hoon; et al, 한국과학기술원, 1975

7
인력 수도 이앙기의 설계와 해석 = Design and anslysis of a manual drive rice transplanting machinelink

최영돈; Choi, Young-Don; et al, 한국과학기술원, 1975

8
유한요소법에의한치차의응력해석 = Stress analysis of gear by finite element methodlink

조진; Cho, Jin; et al, 한국과학기술원, 1975

9
(A) study on the new extrusion-forging processes = 새로운 압출-단조 공정에 관한 연구link

Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1975

10
스프링의 충격 하중에 관한 연구 = Dynamic loading on helical coil springlink

이성근; Lee, Sung-Gun; et al, 한국과학기술원, 1975

11
Computing method for the determination of optimal trajectory = 최적궤도의 계산방법에 대하여link

Lim, Jin-Soo; 임진수; et al, 한국과학기술원, 1975

12
자동차용부러시레스발전기의 중량최적설계 = Optimum weight design of the automotive brushless generatorlink

양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1975

13
주퇴복좌시스템에 관한 연구 = Study on a coneentric-hydro-spring type recoil systemlink

이동호; Lee, Dong-Ho; et al, 한국과학기술원, 1975

14
Annular heat pipe 의 성능에 관한 연구 = Study on the performance of an annular heat pipelink

백제현; Baek, Je-Hyun; et al, 한국과학기술원, 1975

15
Analysis of rachetting behavior of a simple pipelink

Yoo, Yung-Myun; 유영면; et al, 한국과학기술원, 1976

16
함유 베어링의 성능 시험기 설계와 실험 = Design of a porous metal bearing tester and the performance testlink

유형선; Yu, Hyeong-Seon; et al, 한국과학기술원, 1976

17
자석을 이용한 유압조절 벨브에 관한 연구 = Study on a magnet-coupled hydraulic relief valvelink

조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1976

18
電場에서 온도구를 갖는 유체의 不安定연구 = Electro-convection of a fluid layer uniformly heated from belowlink

김교형; Kim, Kyo-Hyoung; et al, 한국과학기술원, 1976

19
Subcooled forced convection burnout for water in uniformly heated horizontal test sections under low pressure = 균일하게 가열되는 수평관에서 과냉된 물의 강제대류 비등에 따른 번아우트 연구link

Lee, Sung-Hong; 이승홍; et al, 한국과학기술원, 1976

20
풍차프로멜러에 대한 응력해석 = Stress analysis of a windmill propellerlink

안택순; Ahn, Taek-Soon; et al, 한국과학기술원, 1976

rss_1.0 rss_2.0 atom_1.0