DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Young Kwan | ko |
dc.contributor.author | Soh, Jeong Ryong | ko |
dc.contributor.author | Kim, Do Kyung | ko |
dc.contributor.author | Lee, HyuckMo | ko |
dc.date.accessioned | 2013-02-27T21:27:47Z | - |
dc.date.available | 2013-02-27T21:27:47Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1998-12 | - |
dc.identifier.citation | JOURNAL OF NON-CRYSTALLINE SOLIDS, v.242, no.2-3, pp.122 - 130 | - |
dc.identifier.issn | 0022-3093 | - |
dc.identifier.uri | http://hdl.handle.net/10203/70945 | - |
dc.description.abstract | The glass forming range of the ternary Al-Ni-Y system has been predicted and compared with experimental measurements. A thermodynamic method was used to obtain T-o curves of binary, Al-Ni, Ni-Y and Y-Al, and the ternary Al-Ni-Y. T-g was approximated by T-x, and T-x was derived from its kinetic relationship with hole formation enthalpy. Based on the magnitude between T-o and T-g, the glass forming range was determined. A wide range was obtained because of the upper limit concept for T-g. This approach can be used as a guide to predict the glass forming range of binary, ternary and higher component systems. (C) 1998 Elsevier Science B.V. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCIENCE BV | - |
dc.subject | SOLID-STATE AMORPHIZATION | - |
dc.subject | AMORPHOUS-ALLOYS | - |
dc.subject | THERMODYNAMIC ASSESSMENT | - |
dc.subject | FORMING ABILITY | - |
dc.subject | TI-NI | - |
dc.subject | SYSTEM | - |
dc.subject | CU | - |
dc.subject | STRENGTHS | - |
dc.subject | PHASES | - |
dc.subject | CO | - |
dc.title | Glass formation in metallic Al-Ni-Y | - |
dc.type | Article | - |
dc.identifier.wosid | 000077623700008 | - |
dc.identifier.scopusid | 2-s2.0-0032303937 | - |
dc.type.rims | ART | - |
dc.citation.volume | 242 | - |
dc.citation.issue | 2-3 | - |
dc.citation.beginningpage | 122 | - |
dc.citation.endingpage | 130 | - |
dc.citation.publicationname | JOURNAL OF NON-CRYSTALLINE SOLIDS | - |
dc.identifier.doi | 10.1016/S0022-3093(98)00792-3 | - |
dc.contributor.localauthor | Kim, Do Kyung | - |
dc.contributor.localauthor | Lee, HyuckMo | - |
dc.contributor.nonIdAuthor | Kim, Young Kwan | - |
dc.contributor.nonIdAuthor | Soh, Jeong Ryong | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordPlus | SOLID-STATE AMORPHIZATION | - |
dc.subject.keywordPlus | AMORPHOUS-ALLOYS | - |
dc.subject.keywordPlus | THERMODYNAMIC ASSESSMENT | - |
dc.subject.keywordPlus | FORMING ABILITY | - |
dc.subject.keywordPlus | TI-NI | - |
dc.subject.keywordPlus | SYSTEM | - |
dc.subject.keywordPlus | CU | - |
dc.subject.keywordPlus | STRENGTHS | - |
dc.subject.keywordPlus | PHASES | - |
dc.subject.keywordPlus | CO | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.