Browse "College of Engineering(공과대학)" by Type Article

Showing results 36841 to 36900 of 62642

36841
Numerical investigation of unsteady aerodynamics of a Horizontal-axis wind turbine under yawed flow conditions

Yu, Dong-Ok; You, Ju-Yeol; Kwon, Oh-Joon, WIND ENERGY, v.16, no.5, pp.711 - 727, 2013-07

36842
Numerical investigation on the aeroelastic instability of a complete aircraft model

Kim, JY; Kwon, HJ; Kim, KS; Lee, In; Han, Jae-Hung, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING , v.48, no.2, pp.212 - 217, 2005-05

36843
Numerical Investigation on the Aeroelastic Instability of Complete Aircraft Model

Kim, Jong-Yun; Kwon, Hyuk-Jun; Kim, Kyung-Seok; Lee, In; Han, Jae-Hung, JSME international journal Series B, pp.96-99, 2004-11

36844
Numerical investigation on the installation effects of electromagnetic flowmeter downstream of a 90 degrees elbow-laminar flow case

Lim, KW; Chung, Myung Kyoon, FLOW MEASUREMENT AND INSTRUMENTATION, v.10, no.3, pp.167 - 174, 1999-09

36845
Numerical investigation on water deteriorated turbulent heat transfer regime in vertical upward heated flow in circular tube

Wibisono, Andhika Feri; Addad, Yacine; Lee, Jeong-Ik, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.83, pp.173 - 186, 2015-04

36846
Numerical Investigation to Evaluate Effect of Fiber Orientation on Penetration-Resistance of an Aircraft Composite Material

Ahmad, Furqan; Abbassi, F; Park, Myung Jyun; Hong, Jung-Wuk, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, v.26, no.19, pp.1613 - 1621, 2019-10

36847
Numerical investigation to evaluate the energy effect on the impact resistance of an aircraft carbon fiber-reinforced polymer composite

Ahmad, Furqan; Mehboob, Hassan; Abbassi, Fethi; Hong, Jung-Wuk; Zghal, Jihed; Mehboob, Ali, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, v.29, no.25, pp.4457 - 4467, 2022-11

36848
Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating

Lee, Eun Ho; Yang, Dong-Yol; Yoon, Jeong Whan; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.75-76, pp.211 - 224, 2015-12

36849
Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector

Lee, Eun Ho; Yang, Dong-Yol; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.78, pp.240 - 250, 2014-11

36850
NUMERICAL MODELING OF ABRUPT HETEROJUNCTIONS USING A THERMIONIC-FIELD EMISSION BOUNDARY-CONDITION

Yang, Kyounghoon; EAST, JR; HADDAD, GI, SOLID-STATE ELECTRONICS, v.36, no.3, pp.321 - 330, 1993-03

36851
Numerical modeling of dynamic recrystallization during nonisothermal hot compression by cellular automata and finite element analysis

Lee, Ho Won; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.10, pp.1277 - 1289, 2010-10

36852
Numerical Modeling of Fracture-Resistant Sn Micropillars as Anode for Lithium Ion Batteries

Qaiser, Nadeem; Kim, Yong Jae; Hong, Chung Su; Han, Seung Min J., JOURNAL OF PHYSICAL CHEMISTRY C, v.120, no.13, pp.6953 - 6962, 2016-04

36853
Numerical modeling of ground borehole expansion induced by application of pulse discharge technology

Park, Hyunku; Lee, Seung Rae; Kim, Tae-Hoon; Kim, Nak-Kyung, COMPUTERS AND GEOTECHNICS, v.38, no.4, pp.532 - 545, 2011-06

36854
Numerical modeling of physical property and electrochemical reaction for solid oxide fuel cells

Park, J.; Kim, S.; Bae, Joongmyeon, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS, v.34, no.2, pp.157 - 163, 2010-02

36855
Numerical Modeling of Reaction and Flow Characteristics in a Blast Furnace with Consideration of Layered Burden

Yang, Kwangheok; Choi, Sangmin; Chung, Jinkyung; Yagi, Jun-ichiro, ISIJ INTERNATIONAL, v.50, no.7, pp.972 - 980, 2010

36856
Numerical modeling of shape memory alloy thin film actuators and their applications

Roh, Jin-Ho; Han, Jae-Hung; Lee, In, ADVANCED NONDESTRUCTUVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS BOOK SERIES: KEY ENGINEERING MATERIALS, v.321-323, pp.186 - 191, 2006

36857
Numerical modeling of the multi-stage sheet pair hydroforming process

Kim, TJ; Yang, Dong-Yol; Han, SS, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.151, no.1-3, pp.48 - 53, 2004-09

36858
Numerical modeling on the stability of slope with foundation during rainfall

Tran, An T. P.; Kim, Ah-Ram; Cho, Gye-Chun, GEOMECHANICS AND ENGINEERING, v.17, no.1, pp.109 - 118, 2019-01

36859
Numerical modelling of keyhole formation in selective laser melting of Ti6Al4V

Ge, Wenjun; Fuh, Jerry Y. H.; Na, Suck Joo, JOURNAL OF MANUFACTURING PROCESSES, v.62, pp.646 - 654, 2021-02

36860
Numerical modelling of slope stabilization with xathan gum-treated soil

An, Tran Thi Phuong; Ilhan, Chang; Nhan, Tran Thanh; Cho, Gye-Chun, VIETNAM JOURNAL OF EARTH SCIENCES, v.45, no.1, pp.98 - 110, 2023-05

36861
Numerical Modelling of Temperature Distribution and Pressure Drop through the Layered Burden Loading in a Blast Furnace

양광혁; 정진경; 최상민, 한국연소학회지, v.14, no.4, pp.1 - 6, 2009-12

36862
Numerical modelling of unsteady spray behaviour in moderately high-pressure regime

Wang, TJ; Baek, Seung-Wook, COMBUSTION THEORY AND MODELLING, v.11, no.1, pp.21 - 46, 2007-02

36863
Numerical models for prestressing tendons in containment structures

Kwak, Hyo-Gyoung; Kim, Jae Hong, NUCLEAR ENGINEERING AND DESIGN, v.236, no.10, pp.1061 - 1080, 2006-05

36864
Numerical optimization approach for designing bandpass filters using fiber Bragg gratings

Chun, Joohwan; Bae, J, OPTICAL ENGINEERING, v.42, pp.23 - 29, 2003-01

36865
Numerical optimization of the thermal performance of a microchannel heat sink

Ryu, JH; Choi, Do Hyung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.45, no.13, pp.2823 - 2827, 2002-06

36866
Numerical prediction of airfoil characteristics in a transonic droplet-laden air flow

Yeom, Geum-Su; Chang, Keun-Sick; Baek, Seung-Wook, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.1-3, pp.453 - 469, 2012-01

36867
Numerical prediction of austenite grain size in a bar rolling process using an evolution model based on a hot compression test

Jung, Kyung-Hwan; Lee, Ho-Won; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.519, no.1-2, pp.94 - 104, 2009-08

36868
Numerical prediction of austenite grain size in round-oval-round bar rolling

Kwon, HC; Lee, Y; Kim, SY; Woo, JS; Im, Yong-Taek, ISIJ INTERNATIONAL, v.43, no.5, pp.676 - 683, 2003-05

36869
Numerical prediction of locally forced turbulent boundary layer

Rhee, GH; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.22, pp.624 - 632, 2001-12

36870
Numerical prediction of locally forced turbulent separated and reattaching flow

Rhee, GH; Sung, Hyung Jin, FLUID DYNAMICS RESEARCH, v.26, no.6, pp.421 - 436, 2000-06

36871
Numerical Prediction of Pressure Drop in a Venturi Scrubber due to Liquid Injection into a Gas Stream

Park, SI; Chang, Keun Sick; Moon, YW; Sah, JY; Ko, DK, COMPUTATIONAL FLUID DYNAMICS JOURNAL, v.14, no.1, pp.84 - 91, 2005-04

36872
Numerical Prediction of Rotor Tip-Vortex Roll-Up in Axial Flights by Using a Time-Marching Free-Wake Method

정기훈; 나성욱; 전완호; 이덕주, 한국항공우주학회지, v.1, no.1, pp.1 - 12, 2000-05

36873
Numerical Prediction of the Impact Fracture of a Projectile Through Oblique Target

Yang, Ju Suk; Choi, Min Kuk; Kim, Chun-Gon, INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, v.24, no.3, pp.798 - 811, 2023-07

36874
NUMERICAL PREDICTIONS OF EVAPORATIVE BEHAVIORS OF HORIZONTAL STREAM INSIDE A MULTI-STAGE-FLASH DISTILLATOR

SEUL, KW; Lee, Sang Yong, DESALINATION, v.79, no.1, pp.13 - 35, 1990-12

36875
Numerical predictions of the interaction between highly nonlinear solitary waves and the microstructure of trabecular bone in the femoral head

Yoon, Sangyoung; Schiffer, Andreas; Kim, Jung Jin; Jang, In Gwun; Lee, Sungmun; Kim, Tae-Yeon, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, v.109, 2020-09

36876
Numerical simulation and empirical comparison of the high velocity impact of STF impregnated Kevlar fabric using friction effects

Park, Yurim; Kim, Yunho; Baluch, Abrar H.; Kim, Chun-Gon, COMPOSITE STRUCTURES, v.125, pp.520 - 529, 2015-07

36877
Numerical simulation and its verification for an active magnetic regenerator

Kim, Young-Kwon; Jeong, Sang-Kwon, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, v.34, no.1, pp.204 - 215, 2011-01

36878
Numerical Simulation of a Gun-launched Projectile Considering Rifled-gun Tube

Joo, Geunsu; Huh, Hoon; Jung, Yeong Hyuk; Kim, Ju Yeong; Seo, Songwon, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, v.41, no.9, pp.877 - 885, 2017-09

36879
Numerical Simulation of Autorotation in Forward Flight

Kim, Hak Yoon; Sheen, Dong Jin; Park, Seung O, JOURNAL OF AIRCRAFT, v.46, no.5, pp.1642 - 1648, 2009-09

36880
Numerical simulation of axisymmetric solid rocket motor ignition transient with radiation effect

Cho, IH; Baek, Seung-Wook, JOURNAL OF PROPULSION AND POWER, v.16, no.4, pp.725 - 728, 2000

36881
Numerical Simulation of Axisymmetric Solid Rocket Motor Ignition Transient with Radiation Effect

Cho, In Hyun; Baek, S.W., AIAA Journal of Propulsion and Power, Vol.16, No.4, pp.725-728, 2000

36882
Numerical simulation of cooling performance of an exhaust gas recirculation (EGR) cooler using nano-fluids

Shabgard, Hojjat; Kheradmand, Saeid; Farzaneh, Hamed; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.110, pp.244 - 252, 2017-01

36883
Numerical simulation of current density in gas tungsten are welding including the influence of the cathode

Fan, HG; Na, Suck-Joo; Shi, YW, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.211, no.4, pp.321 - 327, 1997

36884
Numerical simulation of damage detection using laser-generated ultrasound

Liu, Peipei; Nazirah, Ab Wahab; Sohn, Hoon, ULTRASONICS, v.69, pp.248 - 258, 2016-07

36885
Numerical simulation of droplet transfer behavior in variable polarity gas metal arc welding

Zhao, Yangyang; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.111, pp.1129 - 1141, 2017-08

36886
Numerical Simulation of Dynamic Gait of Quadruped Walking Robot

hong hj; Yoon, Yong-San, SME TRANSACTIONS ON ROBOTICS RESEARCH, v.2, no.2, pp.11 - 36, 1992

36887
Numerical simulation of flame propagation near extinction condition in a micro combustor

Lee, DH; Kwon, Sejin; Choi, KH; Na, HB, MICROSCALE THERMOPHYSICAL ENGINEERING, v.8, no.1, pp.71 - 89, 2004-01

36888
Numerical simulation of flow past a square cylinder using Partially-Averaged Navier-Stokes model

Song, Chi-Su; Park, Seung O, JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, v.97, no.1, pp.37 - 47, 2009-01

36889
Numerical Simulation of Free-Flight Rockets Air-Launched from a Helicopter

Lee, Bum Seok; Choi, Jae Hoon; Kwon, Oh Joon, JOURNAL OF AIRCRAFT, v.48, no.5, pp.1766 - 1775, 2011

36890
Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser

Zhang, L. J.; Zhang, J. X.; Gumenyuk, A.; Rethmeier, M.; Na, Suck-Joo, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.8, pp.1710 - 1720, 2014-08

36891
Numerical simulation of heat transfer flows by a direct solution of generalized kinetic models

Yang, Taeho; Kwon, Oh Joon, COMPUTERS & FLUIDS, v.164, pp.114 - 118, 2018-03

36892
Numerical Simulation of Horizontal Axis Wind Turbines with Vortex Generators

Lee, Hak Min; Kwon, Oh Joon, INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, v.20, no.2, pp.325 - 334, 2019-06

36893
Numerical simulation of HVAB rotor in hover using a mixed-mesh flow solver

Park, Sang Hyun; Kwon, Oh Joon, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.36, no.6, pp.2969 - 2979, 2022-06

36894
Numerical simulation of laser ablation driven melt waves

Pocorni, Jetro; Han, Sang-Woo; Cheon, Jason Hyeonpil; Na, Suck-Joo; Kaplan, Alexander F. H.; Bang, Hee-Seon, JOURNAL OF MANUFACTURING PROCESSES, v.30, pp.303 - 312, 2017-12

36895
Numerical simulation of laser resonators

Yoo, J; Jeong, YU; Lee, BC; Rhee, YJ; Cho, Sung Oh, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, v.44, no.2, pp.293 - 302, 2004-02

36896
Numerical simulation of molten pool dynamics in high power disk laser welding

Cho, Won-Ik; Na, Suck-Joo; Thomy, Claus; Vollertsen, Frank, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.1, pp.262 - 275, 2012-01

36897
Numerical simulation of molten pool flow for various welding parameters in V-groove GMA pipe welding

Cho, Dae-Won; Na, Suck-Joo; Cho, Min-Hyun; Lee, Jong-Sub, Transaction of JWRI, v.39, no.2, pp.9 - 10, 2010-12

36898
Numerical simulation of multi-blow forging processes using the explicit time integration finite element method

Yoo, YH; Yang, Dong-Yol; Chung, DT, ENGINEERING COMPUTATIONS, v.14, no.8, pp.901 - 901, 1997-04

36899
Numerical Simulation of Nonlinear Waves using Optimized High-Order Compact Schemes

Kim, Jae Wook; Lee, Duck-Joo, INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS, v.5, no.3, pp.281 - 300, 1996

36900
Numerical Simulation of Operating Parameters in a Methane Fueled Steam Reforming Reactor

Park, Joon-Guen; Bae, Joong-Myeon, JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v.8, no.5, 2011-10

rss_1.0 rss_2.0 atom_1.0