21481 | 초소성 Al-Li 합금의 변형특성과 미세조직 변화 = Deformation characteristics and microstructural change in superplastic Al-Li alloylink 양영민; Yang, Young-Min; et al, 한국과학기술원, 1992 |
21482 | 초소성 재료의 압력제어성형에 관한 박막유한요소해석 = Numerical simulation of superplastic forming with pressure control using a membrane finite element methodlink 이기석; Lee, Ki-Seok; et al, 한국과학기술원, 1994 |
21483 | 초소형 과산화수소 추력기용 촉매의 성능 평가 = Performance evaluation of catalyst bed of hydrogen peroxide micro thrusterlink 이정섭; Lee, Jeong-Sub; et al, 한국과학기술원, 2009 |
21484 | 초소형 비행체를 이용한 군집 드론 운용 프레임워크 개발 = Development of framework for operating drone swarm using MAVlink 위인환; 심현철; et al, 한국과학기술원, 2020 |
21485 | 초소형 연소기에서의 연소 및 열 손실 특성에 관한 연구 = Combustion and heat loss characteristics in a sub-millimeter depth combustorlink 최권형; Choi, Kwon-Hyoung; et al, 한국과학기술원, 2002 |
21486 | 초소형 인공위성의 자세 결정 및 제어 연구 = Attitude determination and control of nano-satelliteslink 임이랑; Lim, Yee-Rang; et al, 한국과학기술원, 2011 |
21487 | 초소형 인공위성의 자세 결정 및 제어 연구 = Attitude determination and control of nano-satelliteslink 임이랑; Lim, Yee-Rang; et al, 한국과학기술원, 2011 |
21488 | 초소형 정적연소실내에서의 화염 전파의 측정과 해석 = Measurement and analysis of flame propagation in constant volume micro combustorlink 나한비; Na, Han-Bee; et al, 한국과학기술원, 2003 |
21489 | 초소형 카메라용 광학 이미지 안정화 제어 = Control of optical image stabilization system for compact cameralink 김우용; 김경수; Kim, Kyung-Soo; 김수현; et al, 한국과학기술원, 2016 |
21490 | 초소형 흡착식 냉동기 개발에 대한 연구 = A study on the development of micro adsorption refrigeratorlink 최창훈; Choi, Chang-Hoon; et al, 한국과학기술원, 2005 |
21491 | 초소형 흡착식 압축기 개발에 대한 연구 = Investigation on development of micro sorption compressorlink 변정주; Byun, Jung-Joo; et al, 한국과학기술원, 2004 |
21492 | 초속경 시멘트 콘크리트의 배합 및 강도 특성에 관한 기초적 연구 = Mix design and strength for the regulated set cement concretelink 권극헌; Kwon, Keuk-Hun; et al, 한국과학기술원, 1990 |
21493 | 초유동 콘크리트의 배합설계 최적화에 관한 연구 = Mix design optimization of super flowing concretelink 노재호; Noh, Jae-Ho; et al, 한국과학기술원, 1997 |
21494 | 초유동 콘크리트의 재료특성에 관한 연구 = An experimental research on the material properties of super flowing concretelink 한상훈; Han, Sang-Hun; et al, 한국과학기술원, 1996 |
21495 | 초음속 과소 팽창 난류 제트의 해석을 위한 기초연구 = Basic analysis of the supersonic underexpanded turbulent jetslink 윤병국; Yun, Byung-Kook; et al, 한국과학기술원, 1990 |
21496 | 초음속 복합재료 날개에 대한 플러터 해석 = Flutter analysis of composite wing in supersonic flowlink 이동환; Lee, Dong-Hwan; et al, 한국과학기술원, 1992 |
21497 | 초음속 비행체의 플러터 해석 = Flutter analysis of a supersonic flight vehiclelink 김태한; Kim, Tae-Han; et al, 한국과학기술원, 1994 |
21498 | 초음속 연소에서의 2차원 2단 혼합층에 관한 수치해석 = Numerical study on the 2D double shear layer in supersonic combustionlink 김동민; Kim, Dong-Min; et al, 한국과학기술원, 2004 |
21499 | 초음속 유동에서 코로나 방전을 이용한 금속 나노 입자의 생성 = Metallic nano particle generation by supersonic nozzle with corona dischargelink 정재희; Jung, Jae-Hee; et al, 한국과학기술원, 2004 |
21500 | 초음속 이중 압축램프 앞전 곡률에 관한 실험적 연구 = Bluntness effect of double compression ramp in supersonic flowslink 김익현; Kim, Ik Hyun; et al, 한국과학기술원, 2016 |
21501 | 초음파 Synthetic focusing에서 linear FM 신호를 이용한 신호대 잡음비 향상에 관한 연구 = A study on signal in ultrasonic synthetic focusinglink 최정필; Choi, Jung-Pill; 나종범; 박송배; et al, 한국과학기술원, 1992 |
21502 | 초음파 Synthetic focusing에서 그레이팅 로브 감축에 대한 연구 = A study on grating lobe reduction in ultrasonic synthetic focusinglink 손일현; Sohn, Il-Hyun; et al, 한국과학기술원, 1991 |
21503 | 초음파 가진에 의한 표면저항 감소 = Reduction of skin friction by ultrasonic forcinglink 전영진; Jeon, Young-Jin; et al, 한국과학기술원, 2007 |
21504 | 초음파 가진을 이용한 폴리우레탄 미세포 포움의 가공 = Processing of polyurethane microcellular foam by ultrasonic excitationlink 박혁; Park, Hyeog; et al, 한국과학기술원, 1990 |
21505 | 초음파 도플러 시스템에서 펄스의 대역폭이 속도 측정에 미치는 영향에 대한 연구 = A study on the effect of pulse bandwidth on the velocity measurement in the ultrasonic pulsed doppler systemlink 안영복; Ahn, Young-Bok; et al, 한국과학기술원, 1987 |
21506 | 초음파 섹터 스캐너에서의 새로운 샘플링 및 표시방법 = A new sampling and display method for ultrasound sector scannerlink 정용훈; Jeong, Yong-Hoon; et al, 한국과학기술원, 1984 |
21507 | 초음파 센서를 이용한 이동 로보트의 항법에 관한 연구 = A study on the mobile robot navigation using an ultrasonic sensorlink 이철화; Lee, Chirl-Hwa; et al, 한국과학기술원, 1988 |
21508 | 초음파 영상에서 국소간병변 분류를 위한 특징 연구 = Exploring Features for focal hepatic lesions detection in ultrasound imagelink 조인아; Jo, In-A; et al, 한국과학기술원, 2011 |
21509 | 초음파 영상에서 국소간병변 분류를 위한 특징 연구 = Exploring Features for focal hepatic lesions detection in ultrasound imagelink 조인아; Jo, In-A; et al, 한국과학기술원, 2011 |
21510 | 초음파 의료영상의 컴퓨터보조진단 시스템에서 다중 영상을 이용한 진단 정확도 향상 = Improving diagnostic accuracy of computer-aided diagnosis systems with multiple images in ultrasound medical imaginglink 이기용; Lee, Ki Yong; et al, 한국과학기술원, 2015 |
21511 | 초음파 접합 방법을 이용한 연성 기판-유기 경성 기판간 솔더 ACF 접합 특성에 관한 연구 = A study on the characteristics of solder anisotropic conductive film (ACF) flex-on-board (FOB) joints using ultrasonic bonding methodlink 김원철; Kim, Won-Chul; et al, 한국과학기술원, 2011 |
21512 | 초음파 접합 방법을 이용한 연성 기판-유기 경성 기판간 솔더 ACF 접합 특성에 관한 연구 = A study on the characteristics of solder anisotropic conductive film (ACF) flex-on-board (FOB) joints using ultrasonic bonding methodlink 김원철; Kim, Won-Chul; et al, 한국과학기술원, 2011 |
21513 | 초음파 접합에서 Au 스트립 범프의 형상이 접합 강도에 미치는 영향 = Influence of Au strip bump shape on bond strength with ultrasonic bondinglink 나성욱; Na, Sung-Wook; et al, 한국과학기술원, 2005 |
21514 | 초음파 진단기용 8-bit 40MS/s folding and interpolation A/D converter의 설계 = An 8-bit 40MS/s folding and interpolation A/D converter for ultrasound imaging systemlink 류승탁; Ryu, Seung-Tak; et al, 한국과학기술원, 1999 |
21515 | 초음파 진단기의 화상처리 작업에서의 joystick의 최적 c-d gain에 관한 연구 = Optimal c-d gain of joystick in an image control task of an ultrasonic diagnosis machinelink 김운회; Kim, Un-Hoi; et al, 한국과학기술원, 1989 |
21516 | 초음파 진단장치에 대한 시스템 소프트 웨어 = System S/W for the ultrasound medical imaging systemlink 박용헌; Park, Yong-Heon; et al, 한국과학기술원, 1984 |
21517 | 초음파 진단장치에 사용되는 디지탈 스캔 콘버터에 관한 연구 = A study on the digital scan converter for ultrasound medical imaging systemslink 김영모; Kim, Yeong-Mo; et al, 한국과학기술원, 1984 |
21518 | 초음파 진단장치의 개발에 관한 연구 = A study on the ultrasonic B-scanner : analog partslink 신동희; Shin, Dong-Hee; et al, 한국과학기술원, 1983 |
21519 | 초음파 진단장치의 개발에 관한 연구 = A study on the ultrasonic B-scanner : dynamic focusing controllink 김영모; Kim, Young-Mo; et al, 한국과학기술원, 1983 |
21520 | 초음파 진단장치의 개발에 관한 연구 = A study on the ultrasonic B-scannerlink 김청월; Kim, Cheong-Wul; et al, 한국과학기술원, 1983 |
21521 | 초음파 진단장치의 개발에 관한 연구 : 시스템 소프트웨어 = A study on the ultrasonic B-scanner : system softwarelink 고광식; Koh, Kwang-Sik; et al, 한국과학기술원, 1983 |
21522 | 초음파 진동이 7075 알루미늄 합금의 설출경화에 미치는 영향 = The effect of ultrasonic vibrations on the precipitation hardening of 7075 Al alloylink 노태환; No, Tae-Hwan; et al, 한국과학기술원, 1980 |
21523 | 초음파 진동절삭에 의한 광학 플라스틱의 연성모드화 미소표면현상에 관한 연구 = A study on micro surface-phenomenon of ductile mode by the ultrasonic vibration cutting for optical plasticslink 최인휴; Choi, In-Hyu; et al, 한국과학기술원, 1995 |
21524 | 초음파 측정에 의한 절삭작업중의 공구마멸 감지에 대한 연구 = A study on the in-process sensing of tool wear by acoustic emission measurementlink 이명상; Lee, Myeong-Sang; et al, 한국과학기술원, 1985 |
21525 | 초음파 탐상법을 이용한 두꺼운 직조 S2-글라스/폴리에스터 복합재의 결함 검출 및 강도 저하에 관한 연구 = Damage detection of thick S2-glass/polyester woven laminates using ultrasonic test and mechanical property degradationlink 강희엽; Kang, Hee-Youb; et al, 한국과학기술원, 2001 |
21526 | 초음파 탐상법을 이용한 복합적층판의 저속충격손상 평가 = The evaluation of low-velocity impact damage of composite laminates using ultrasonic textlink 권태훈; Kwon, Tae-Hoon; et al, 한국과학기술원, 1998 |
21527 | 초음파 트랜스듀서를 이용한 소나 (Sonar) 실시간 모의표적 구현에 관한 연구 = Real-time implementation of the simulated sonar target using acoustic transducerslink 최미홍; Choe, Mi-Heung; et al, 한국과학기술원, 1995 |
21528 | 초음파 펄스 도플러 시스템에서의 평균주파수 Aliasing 에 대한 연구 = A study on the mean-frequency aliasing in the ultrasonic pulsed doppler systemlink 배무호; Bae, Moo-Ho; et al, 한국과학기술원, 1988 |
21529 | 초음파 펄스도플러 시스템의 애매함수 및 다중 채널 실현에 관한 연구 = A study on ambiguity functions and multigate realization in ultrasonic pulsed doppler systemlink 이상오; Lee, Sang-O; et al, 한국과학기술원, 1985 |
21530 | 초음파 화학 가공을 이용한 전극봉 제작 및 미세 구멍의 방전 가공에 관한 연구 = A study on ultrasonic-assisted chemcial machining of fine rod and micro-hole drilling by EDMlink 윤재웅; Yoon, Jae-Woong; et al, 한국과학기술원, 1990 |
21531 | 초음파를 이용한 3차원 영상재구성에 관한 연구 = Study of ultrasonic 3-dimensional image reconstructionlink 안승옥; Ahn, Seung-Ok; et al, 한국과학기술원, 1981 |
21532 | 초음파를 이용한 고분자 포움의 가공 = Ultrasonic processing of polymer foamlink 변성광; Byeon, Seong-Kwang; et al, 한국과학기술원, 1989 |
21533 | 초음파를 이용한 솔더 범프 패턴 형성에 관한 연구 = A study on fabricating solder bump pattern using ultrasoniclink 남동진; Nam, Dong-Jin; et al, 한국과학기술원, 2007 |
21534 | 초음파를 이용한 알루미늄 합금 및 폴리우레탄(TDI/PPG(1000)/MOCA)재료의 음향특성 측정 방법에 관한 연구 = A study on the measurement method of acoustic properties of Al alloy and Polyurethane(TDI/PPG(1000)/MOCA) using ultrasonic pulselink 김태식; Kim, Tae-Sik; et al, 한국과학기술원, 1998 |
21535 | 초음파를 이용한 액체막 두께 측정및 유동 영역 판별 = Flow regime characterization and liquid film thickness measurement by an ultrasonic methodlink 박종률; Park, Jong-Ryul; 전문헌; 이세경; et al, 한국과학기술원, 1984 |
21536 | 초음파를 이용한 펄스 도플러 시스템에 관한 연구 = A study on ultrasound pulsed doppler systemslink 김성률; Kim, Seoung-Ryool; et al, 한국과학기술원, 1984 |
21537 | 초음파영상시스템의 해상도를 높이기 위한 튜닝범위가 넓은 Gm-C 대역통과필터의 설계 = A wide range tunable CMOS Gm-C bandpass filter for ultrasound medical systemlink 이광; Lee, Kwang; et al, 한국과학기술원, 1997 |
21538 | 초음파의 다중 반사 특성을 이용한 실내공간에서의 목표물 인식에 관한 연구 = Target classification in indoor environment using multiple reflection of ultrasoundlink 류동연; Ryu, Dong-Yeon; et al, 한국과학기술원, 1997 |
21539 | 초음파전파영상화 시스템을 이용한 복합재 격자 구조체 비파괴평가 기술 연구 = Study of non-destructive evaluation technology of composite lattice structure using ultrasonic propagation imaging systemlink 박재윤; 이정률; et al, 한국과학기술원, 2017 |
21540 | 초임계 이산화탄소를 이용한 주목의 잎과 종자로부터 탁솔관련물질 추출에 관한 연구 = Extraction of taxol-like compounds from needle and seed of yew tree by using supercritical carbon dioxidelink 전문균; Chun, Moon-Kyoon; et al, 한국과학기술원, 1994 |