Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 21841 to 21900 of 23505

21841
최소 비용 오류 보정 파서에서 삽입및 삭제 비용 = Insertion and deletion cost in locally least-cost error repair parserlink

채의근; Chae, Yi-Geun; et al, 한국과학기술원, 1988

21842
최소 스위치를 갖는 직렬 공진형 AC/AC 콘버어터를 사용한 새로운 전자식 강압기에 관한 연구 = A study on the new electronic step-down transformer using a series resonant AC/AC converter with minimum switcheslink

정기진; Jung, Gi-Jin; et al, 한국과학기술원, 1989

21843
최소 자승법을 이용한 원하는 공간 내의 음장 재생 기법 = Sound field reproduction at specified control volume using least squares approachlink

노지인; Noh, Jee-In; et al, 한국과학기술원, 2012

21844
최소 접근 온도의 최적화를 통한 열교환망 합성 = Synthesis of heat exchanger network by optimizing the minimum temperature differencelink

김상우; Kim, Sang-Woo; et al, 한국과학기술원, 1992

21845
최소 지속 기간을 보장하는 은닉 마르코프 모델과 이의 응용 = Applications of hidden markov model with guaranteed minimum durationlink

김동현; Kim, Dong-Hyun; et al, 한국과학기술원, 2014

21846
최소 진동을 유지하는 천정 크레인의 위치 제어 = Position control of a roof crane with minimal oscillation capabilitylink

임태승; Lim, Tae-Seung; et al, 한국과학기술원, 1992

21847
최소 침습 인공 고관절 수술 로봇 개발에 관한 연구 = Study on a development of MIS robot for THAlink

박석훈; Park, Suk-Hoon; et al, 한국과학기술원, 2004

21848
최소 평균 제곱 오차 방식을 이용한 가변 처리이득 직접수열 부호분할 다중접속 다중사용자 검파기 = MMSE-based multiuser detector for VPG-DS/CDMA systemlink

서방원; Seo, Bang-Won; et al, 한국과학기술원, 1999

21849
최소동력을 요하는 4각 보행로보트의 다리기구 설계 = Design of the leg mechanism of four-legged walking robot with minimum power requirementlink

김진연; Kim, Jin-Yeon; et al, 한국과학기술원, 1988

21850
최소분리영역 기준에 근거한 원뿔의 기하학적 형상 오차 평가 = Geometric form evaluation of cone based on the minimum zone criterialink

김형민; Kim, Hyung-Min; et al, 한국과학기술원, 1997

21851
최소자승법을 이용한 그래프 데이타 모델링 프로그램의 개발 = Development of a computer program for automatic modeling of graph data by the least square methodlink

이준배; Lee, Jun-Bae; et al, 한국과학기술원, 1991

21852
최소자승유한요소법을 이용한 유체-구조 연계해석에 관한 연구 = A study on the fluid-structure interaction using LSFEMlink

이성호; Lee, Sung-Ho; et al, 한국과학기술원, 2000

21853
최소직경 2-Clustering 을 위한 알고리즘 = An algorithm for min-max diameter 2-clusteringlink

김명근; Kim, Myoung-Geun; et al, 한국과학기술원, 1984

21854
최소침습 수술도구의 힘 측정용 소형 힘 센서 = Miniaturized force transducer for minimum invasive surgical instrumentlink

황민호; Hwang, Min-Ho; et al, 한국과학기술원, 2012

21855
최적 구색 갖추기 = Optimal standard size setlink

정두근; Chung, Du-Keun; et al, 한국과학기술원, 1982

21856
최적가중함수를 이용한 대류항이 큰 전달방정식의 Upwind 유한요소해석 = A study on an upwind finite element method using optimal weighting function for solving transport equations with large convection termlink

민준기; Min, June-Kee; 정명균; 권장혁; et al, 한국과학기술원, 1990

21857
최적가중함수를 이용한 압축성 유동의 Upwind 유한요소해석 = Upwind finite element methods using optimal weighting functions for solving compressible euler equationslink

지선구; Ji, Seon-Goo; et al, 한국과학기술원, 1993

21858
최적응답특성을 갖는 부하적응유압속도 제어기 설계에 관한 연구 = A study on the design of load adaptive hydraulic velocity controller with the optimal responselink

범희락; Beom, Hee-Rak; 조형석; 양동열; et al, 한국과학기술원, 1985

21859
최적인 2-단계 고장 진단 시스템에 관한 연구 = A study on optimal design of two-step fault diagnosable systemslink

박정흠; Park, Jung-Heum; 권용래; 좌경룡; et al, 한국과학기술원, 1987

21860
최적제어기법을 이용한 우주시스템의 동적 기술포트폴리오 최적화 = Dynamic technology portfolio selection of space system using optimal control theorylink

홍슬기; Hong, Seulki; et al, 한국과학기술원, 2016

21861
최적화 기반 통계적 모델 보정을 위한 크리깅 모델의 효율적인 순차적 샘플링 기법 = (An) efficient sequential sampling method of kriging surrogate model for optimization-based statistical model calibrationlink

조휘상; 이익진; et al, 한국과학기술원, 2019

21862
최적화 기법을 사용한 선체곡면의 정형 = Surface fairing of ship hull form by optimization techniquelink

정동관; Jeong, Dong-Gwan; et al, 한국과학기술원, 1986

21863
최적화 기법을 이용한 매니퓨레이터 조인트 마찰력 규명 및 실험적 검증 = Manipulator joint friction identification using optimization technique and its experimental verificationlink

김경호; Kim, Gyeong-Ho; et al, 한국과학기술원, 1998

21864
최적화 프롤로그 컴파일러의 설계및 구현 = Design and implementation of an optimizing prolog compilerlink

박영복; Park, Yeong-Bok; et al, 한국과학기술원, 1989

21865
최적화된 Layout 설계를 이용한 InP 기반 RTD/HBT 기술의 성능 향상 = Performance Improvement of InP-based RTD/HBT Technology using Optimized Geometrical Layout Designlink

이종원; Lee, Jong-Won; et al, 한국과학기술원, 2008

21866
최적화된 Zn Diffusion 과 p-type Ohmic Contact 공정을 이용한 광통신용 Planar-type InGaAs/InP Avalanche Photodiode 의 제작 및 특성 분석 = Fabrication and Characterization of Planar-type InGaAs/InP Avalanche Photodiodes using Optimized Zn Diffusion and p-type Ohmic Contact for Optical Communicationslink

김철규; Kim, Cheol-Gyu; et al, 한국과학기술원, 2011

21867
최적화된 집적 유한 차분 수치기법을 위한 예조건화와 난류모델에 대한 연구 = A study on preconditioning matrix and turbulent model for optimized compact schemelink

허대녕; Heo, Dae-Nyoung; et al, 한국과학기술원, 1999

21868
최적화된 집적 유한 차분 수치기법을 이용한 초음속 제트의 Screech Tone 해석 = An analysis of screech tone noise from supersonic jet using optimized compact schemelink

이인철; Lee, In-Cheol; et al, 한국과학기술원, 2003

21869
최적화된 집적 유한 차분법을 이용한 항공기 팬 소음의 근거리 방사 연구 = A numerical study on the sound radiation from aircraft engine inlet using optimized compact schemelink

심인보; Shim, In-Bo; et al, 한국과학기술원, 1998

21870
최적화된 집적 유한차분법을 위한 내재적 시간전진 기법의 특성 연구 = A study on characteristics of implicit optimized compact schemelink

박노성; Park, No-Sung; et al, 한국과학기술원, 1999

21871
최적화된 집적유한차분을 이용한 고차의 정확도와 고해상도를 갖는 유한 체적법의 연구 = A study on optimized compact finite volume schemelink

김용제; Kim, Yong-Jea; et al, 한국과학기술원, 2001

21872
쵸퍼 구동기를 이용한 스텝 모터의 고속정밀제어에 관한 연구 = A study on high speed and high accuracy control of step motor using Chopper driverlink

오동성; Oh, Dong-Seong; et al, 한국과학기술원, 1987

21873
추가 변형률 요소를 이용한 열 응력 해석에 관한 연구 = A study on thermal stress analysis using enhanced assumed strain elementslink

고진환; Ko, Jin-Hwan; et al, 한국과학기술원, 1997

21874
추가 절점자유도를 가지는 Cosserat 연속체역학 기반 평면 사각요소 개발 = Development of cosserat plane quadrilateral elements with addtional degrees of freedomlink

이동기; Lee, Dong-Gi; et al, 한국과학기술원, 2014

21875
추계론적 유한요소법을 이용한 지반의 부등침하 해석 = Stochastic numerical analysis of differential settlementlink

이형주; Lee, Hyung-Joo; et al, 한국과학기술원, 1988

21876
추돌 회피를 위한 도로 주행 차량의 종방향 제어기에 관한 연구 = A study on the longitudinal controller of road-vehicle for rear-end collision avoidancelink

김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1999

21877
추론 모형에 기초한 믿음과 지식의 증명 방법에 관한 연구 = A proof mechanism for knowledge and belief based on deduction modellink

김영훈; Kim, Young-Hoon; et al, 한국과학기술원, 1988

21878
추론된 모델 기반 커널 퍼즈 테스팅 = Inferred model-based kernel fuzz testinglink

한형석; 차상길; et al, 한국과학기술원, 2018

21879
추상적 데이타 형의 중복을 허용하는 중포 트랜잭션을 위한 동시성 제어 = Concurrency control for a nested transaction model allowing replicated abstract data typeslink

조행래; Cho, Haeng-Lae; et al, 한국과학기술원, 1990

21880
추적 레이더를 위한 목표물 검파기의 구현에 관한 연구 = Implementation of a target detector for the tracking radar systemlink

이동섭; Lee, Dong-Seop; et al, 한국과학기술원, 1998

21881
추적식 3차원 형상 측정을 위한 광학식 변위센서 = A study on the optical displacement sensor for a three dimensional surface profile measurement by a tracking methodlink

이재윤; Lee, Jae-Yun; et al, 한국과학기술원, 1991

21882
추진제 농도의 과산화수소 증류 조건 확립 및 성능 평가 = Distillation of rocket grade hydrogen peroxide and performance evaluation of distilled hydrogen peroxidelink

정승미; Chung, Seung-Mi; et al, 한국과학기술원, 2010

21883
추천 시스템에서 온톨로지를 이용한 퍼지 척도 기반의 협업 필터링 기법 = Fuzzy measure based-collaborative filtering using ontology in personalized recommender systemlink

심지현; Shim, Ji-hyun; et al, 한국과학기술원, 2008

21884
축 대칭 Hydroforming 공정에 의한 유한 요소 해석 = Finite element analysis of the axisymmetric hydroforming processlink

최선준; Choi, Sun-Jun; et al, 한국과학기술원, 1984

21885
축 대칭 복합 압출에 관한 상계해 = An upper bound analysis of the axisymmetric combined extrusionlink

김용환; Kim, Yong-Hwan; et al, 한국과학기술원, 1981

21886
축 방향 유동 유체 내에서 봉집합체의 진동 현상 = Vibration of rod bundles in axial channel flowlink

정경훈; Jeong, Kyeong-Hoon; et al, 한국과학기술원, 1985

21887
축 방향을 따라 지름이 정현 곡선으로 변하는 굴곡 관 내의 유동과 열전달 특성에 관한 연구 = Flow and thermal analysis for corrugated tubes with sinusoidal axial variations in diameterlink

유담; Yoo, Dahm; et al, 한국과학기술원, 2015

21888
축구 로봇의 의도 추출에 관한 연구 = A study on intention extraction of soccer robot systemlink

박해리; Park, Hae-Rhee; et al, 한국과학기술원, 2003

21889
축대칭 hydroforming 공정의 상계해석 = An upper-bound analysis of the axisymmetric hydroforming processlink

박영현; Park, Young-Hyun; et al, 한국과학기술원, 1986

21890
축대칭 공동(空洞)내의 동축 제트 혼합에 대한 연구 = Experimental study on the mixing of the coaxial jets in an axisymmetric cavitylink

김인철; Kim, In-Cheol; et al, 한국과학기술원, 1990

21891
축대칭 난류 제트 확산 화염의 특성 예측에 관한 연구 = A study on the prediction of the properties of a axi-symmetrical turbulent jet diffusion flamelink

김이환; Kim, Iee-Hwan; et al, 한국과학기술원, 1982

21892
축대칭 및 평면 변형 단조의 열-점소성 유한 요소 해석 = Thermo-viscoplastic finite element analysis of axisymmetric and plane strain forginglink

천명식; Cheon, Myeong-Sig; et al, 한국과학기술원, 1988

21893
축대칭 비행체의 전방동체부를 흐르는 천음속 유동 = Full potential transonic flow past forebodies of axisymmetric flight vehicleslink

김동환; Kim, Dong-Huan; et al, 한국과학기술원, 1982

21894
축대칭 유한 요소 해석에서 단위체 격자 재구성법과 퍼지 로직을 이용한 전방투사법 = Forward projection using modular remeshing and fuzzy logic in axisymmetric finite element simulationlink

정낙면; Jung, Nak-Myeon; et al, 한국과학기술원, 1992

21895
축대칭 코안다 제트에 대한 실험적 고찰 = An experimental investigation of the axisymmetric coanda jetlink

김유곤; Kim, You-Gon; et al, 한국과학기술원, 1982

21896
축대칭 하이드로 미케니칼 디프 드로잉 공정의 유한 요소 해석 = Finite element analysis of axisymmetric hydro-mechanical deep drawing processlink

김한경; Kim, Han-Gyeong; et al, 한국과학기술원, 1990

21897
축대칭 휘슬의 소음발생에 관한 수치적 시뮬레이션 = Numerical simulation of the noise generation in an axisymmetric whistlelink

한승진; Han, Seung-Jin; et al, 한국과학기술원, 2001

21898
축대칭형 제품의 냉간 단조 공정 설계용 전문가 시스템 개발 = Development of expert system for process design of axisymmetric cold forginglink

김홍석; Kim, Hong-Seok; et al, 한국과학기술원, 1994

21899
축력을 받는 철근 콘크리트 휨 부재의 균열 간격 = Crack spacing of reinforced concrete flexural member with axial forcelink

박성연; Park, Sung-Yeon; et al, 한국과학기술원, 1990

21900
축류펌프의 설계, 성능해석 및 검증시험 = Design, performance prediction and test of axial-flow pumplink

송재욱; Song, Jae-Wook; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0