Effect of secondary gas injection on the particle entrainment rate in a gas fluidized bed

Abstract

The effect of secondary gas injection on the particle entrainment rate was measured in a cold model fluidized bed (i.d. 0.1 m, height 2.25 m) and discussed. Sand particles below 0.425 mm in screen size were used as bed materials. The particle size (0.128-0.363 mm), the overall superficial gas velocity (0.78-2.76 m/s), the secondary gas fraction (0-0.5), and the static bed height (0.1-0.3 m) were considered as experimental variables. The particle entrainment rate decreased with an increase of the secondary gas fraction. The injection level of the secondary gas was shown to have an important influence on its effect. The effect of the secondary gas was appreciable for over-bed injection; the effect was reduced, however, when the injection level was placed in the splash zone or in the dense phase by means of increasing the bed height.