Akhmadjonov Akromjon; Bae, Kyung Taek; Lee, Kang Taek, NANO-MICRO LETTERS, v.16, no.1, 2024-12
Bae, Ji Eun; Hyun, Minji; Kim, Deok Woo; Mateos, Xavier; Ajates, Javier Garcia; Romero, Carolina; De Aldana, Javier Rodriguez Vazquez; Kim, Jungwon; Rotermund, Fabian, OPTICS AND LASER TECHNOLOGY, v.179, 2024-12
Ravichandran, Naresh Kumar; Kim, Hyemi; Park, Joonha; Hur, Hwan; Kim, Jinsung; Bae, Ji Yong; Hyun, Sangwon; Kim, I. Jong; Kim, Dong Uk; Lee, Sang-Chul; Chang, Ki Soo; Muniraj, Inbarasan; Jeon, Jessie S.; Nam, Ki-Hwan; Lee, Kye-Sung, OPTICS AND LASER TECHNOLOGY, v.179, 2024-12
Kim, Minjik; Kook, Junghwan; Andersen, Peter Risby; Lee, Ikjin, Advances in Engineering Software, v.197, pp.103748, 2024-11
Gu J.; Jung Y.; Ahn J.; Ahn J.; Choi J.; Kang B.; Jeong Y.; Ha J.-H.; Kim T.; Jung Y.; Park J.; Jung J.; Ryu S.; Lee I.; Park I., Nano Energy, v.130, 2024-11
Park, Yuhyun; Choi, Sunkun; Ryou, KenHee; Park, JungHun; Choi, Won Seok; Ko, Won-Seok; Choi, Pyuck-Pa; Sim, Gi-Dong, Materials Science and Engineering: A, v.915, pp.147250, 2024-11
Song, Yeo-Ul; Song, Byeong Uk; Jung, Min-Kyo; Lee, Changwoo; Choi, Joon Phil; Lee, Ikjin, JOURNAL OF MANUFACTURING PROCESSES, v.127, pp.107 - 114, 2024-10
Jo H.; Song B.-U.; Huh J.-Y.; Lee S.-K.; Lee I., Journal of Mechanical Design, v.146, no.10, 2024-10
Kim, Ji-Young; Rehman, Abdul; Ryu, Hyemin; Oh, Injong; Sim, Gi-Dong, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.912, 2024-10
Lee, Song Ha; Cha, Beomseok; Yi, Hee -Gyeong; Kim, Jangho; Jeon, Jessie Sungyun; Park, Jinsoo, SENSORS AND ACTUATORS B-CHEMICAL, v.417, 2024-10
단순보강링을 갖는 압출 금형의 치수 최적설계 안성찬; 임용택, 소성가공, v.11, no.4, pp.363 - 370, 2002-04 |
Design sensitivity analysis of sheet metal forming processes with a direct differentiation method Kim, Se-Ho; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.130, no.14, pp.504 - 510, 2002-12 |
후향계단 형상내의 압축성 난류 유동에 대한 복사열전달의 영향 김상수; 백승욱, 한국항공우주학회지, v.23, no.6, pp.54 - 61, 1995-06 |
AN EXPERIMENTAL STUDY ON THE POSITION CONTROL OF AN ELECTROHYDRAULIC SERVO SYSTEM USING TIME DELAY CONTROL Chin, Sung-Mu; Lee, Chung-Oh; Chang, Pyung H., Control Engineering Practice, Vol.2, No.1, pp.41-48, 1994-02 |
리바요소를 이용한 섬유강화 고무기저 복합재료의 3차원 유한요소 모델링기법 정세환; 송정한; 허훈; 김진웅; 김진영, 대한기계학회논문집 A, v.30, no.12, pp.1518 - 1525, 2006-12 |
충돌해석에서의 점용접부 모델링에 따른 하중특성 평가 송정민; 박성호; 허훈; 김홍기, 한국자동차공학회 논문집, v.14, no.2, pp.174 - 183, 2006-03 |
움직이는 램프를 지나는 초음속 비점성 과도유동의 수치적 연구 박승오; 정용만; 성형진; 성홍계, 한국항공우주학회지, v.21, no.4, pp.15 - 23, 1993-08 |
미소 섭동 방정식을 이용한 날개-동체-꼬리날개의 천음속 유동장 해석 박승오; 노세근; 김종성; 최도형, 한국항공우주학회지, v.13, no.2, pp.32 - 41, 1985-08 |
Analysis and control of redundant manipulator dynamics based on an extended operational space Park K.C.; Chang P.-H.; Lee S., ROBOTICA, v.19, pp.649 - 662, 2001 |
Anti-vapor Lock of a Top-Feed Injector for a Liquefied Petroleum Gas Liquid-Phase Injection Engine Yeom, Kitae; Park, Jungseo; Bae, Choongsik; Park, Jeongnam; Kim, Sungkun, Energy and Fuels, Vol.23, No.2, pp.876-883, 2009-02-19 |
Influence of early fuel injection timings on premixing and combustion in a diesel engine Kook, Sanghoon; Park, Seik; Bae, Choongsik, ENERGY & FUELS, v.22, no.1, pp.331 - 337, 2008-01 |
Maximum spreading of electrically charged droplets impacting on dielectric substrates Lee, Sang Yong; Ryu, Sung Uk, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.35, no.1, pp.1 - 7, 2009-01 |
A Solution to the Accuracy/Robustness Dilemma in Impedance Control Kang, Sang Hoon; Jin, Maolin; Chang, Pyung-Hun, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.14, no.3, pp.282 - 294, 2009-06 |
Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization (vol 90, pg 013113 2007) Yang, Dong-Yol; Park, SH; Lim, TW; Kong, Hong-Jin; Yi, SW; Yang, HK; Lee, KS, APPLIED PHYSICS LETTERS, v.90, pp.2800 - 2804, 2007-02 |
Subregional slicing method to increase three-dimensional nanofabrication efficiency in two-photon polymerization Park, SH; Lee, SH; Yang, Dong-Yol; Kong, Hong-Jin; Lee, KS, APPLIED PHYSICS LETTERS, v.87, pp.1353 - 1361, 2005-10 |
Bang-bang impact control using hybrid impedance/time-delay control Lee, E; Park, J; Loparo, KA; Schrader, CB; Chang, PH, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.8, pp.272 - 277, 2003-06 |
Design of learning input shaping technique for residual vibration suppression in an industrial robot Park, Juyi; Chang, Pyung-Hun; Park, Hyung-Soon; Lee, Eunjeong, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.11, no.1, pp.55 - 65, 2006 |
The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review Arcounianis, Constantine; Bae, Choongsik; Crookes, Roy; Kinoshita, Eiji, FUEL, v.87, no.7, pp.1014 - 1030, 2008-06 |
The spray characteristics of a pressure-swirl injector with various exit plane tilts Moon, Seoksu; Abo-Serie, Essam; Bae, Choongsik, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.34, no.7, pp.615 - 627, 2008-07 |
A straight-line motion tracking control of hydraulic excavator system Chang P.H.; Lee S.-J., MECHATRONICS, v.12, no.1, pp.119 - 138, 2002 |
Discover