Showing results 1741 to 1800 of 2827
Measurement of electron temperature fluctuations using a tunable correlation electron cyclotron emission system on Alcator C-Mod Howard, N. T.; Sung, Choongki; White, A. E., REVIEW OF SCIENTIFIC INSTRUMENTS, v.85, no.11, 2014-11 |
Measurement of heat transfer coefficients for direct contact condensation in core makeup tanks using holographic interferometer Ju, SH; No, Hee Cheon; Mayinger, F, NUCLEAR ENGINEERING AND DESIGN, v.199, no.1-2, pp.75 - 83, 2000-06 |
Measurement of interfacial curvatures in micro-phase-separated bicontinuous structures using small-angle neutron scattering Chen, SH; Choi, SungMin; LoNostro, P, NUOVO CIMENTO DELLA SOCIETA ITALIANA DI FISICA D-CONDENSED MATTER ATOMIC MOLECULAR AND CHEMICAL PHYSICS FLUIDS PLASMAS BIOPHYSICS, v.20, no.12BIS, pp.1971 - 1988, 1998-12 |
Measurement of interfacial curvatures in microemulsions using small-angle neutron scattering Choi, SungMin; Chen, SH; Sottmann, T; Strey, R, PHYSICA B, v.241, pp.976 - 978, 1997-12 |
Measurement of local mechanical properties for Cr-coated accident tolerant fuel cladding Hong, JongDae; Ahn, Daehyeok; Jang, Dongchan; Oh, Hongryul; Kim, JaeYong; Kim, Hyochan; Sevecek, Martin, JOURNAL OF NUCLEAR MATERIALS, v.579, 2023-06 |
Measurement of local two-phase flow parameters of nanofluids using conductivity double-sensor probe Park, Yu-Sun; Chang, Soon-Heung, NANOSCALE RESEARCH LETTERS, v.6, 2011-04 |
Measurement of Neutron Emission Rate of Cf-252 Source by the Comparative Method sun-tae hwang; Lee, Kun Jai, JAPANESE JOURNAL OF APPLIED PHYSICS, v.13, no.3, pp.138 - 144, 1987 |
Measurement of Neutron Spectra at the Inside and outside of the Target Room of 65 MeV Electron LINAC using an Extended Bonner Spher Kim, B. H; Chang, S. Y; Kim, J. S; Lee, H. S; Kwak, S. W; Cho, Gyuseong, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, v.41, no.0, pp.176 - 179, 2004-03 |
Measurement of the neutron fluence and dose spectra using an extended Bonner Sphere and a tissue-equivalent proportional counter Kim, BH; Chang, SY; Lee, HS; Cho, Gyuseong, RADIATION PROTECTION DOSIMETRY, v.110, pp.717 - 723, 2004 |
Measurement of the voltage evolution on a load of X-pinch plasma system using the Pockels effect Choi, Seongmin; Ham, Seunggi; Ryu, Jonghyeon; Park, Sungbin; Kim, Jung-Hwa; Choi, YeongHwan; Chung, Kyoung-Jae; et al, JOURNAL OF INSTRUMENTATION, v.18, no.11, 2023-11 |
Measurement of two-phase mixture level using an ultrasonic method Lee, DW; No, Hee Cheon; Song, CH, EXPERIMENTAL THERMAL AND FLUID SCIENCE, v.29, no.5, pp.609 - 614, 2005-06 |
Measurements of interfacial curvatures and evidence for morphological transition in semifluorinated non-isometric microemulsions Choi, SungMin; LoNostro, P.; Chen, S.-H., PROGRESS IN COLLOID AND POLYMER SCIENCE, v.112, no.0, pp.98 - 104, 1999 |
Measurements of the curvatures of random surfaces by scattering experiments: the case of bicontinuous microemulsions Chen, SH; Choi, SungMin, CHINESE JOURNAL OF PHYSICS, v.35, no.4, pp.527 - 540, 1997-08 |
Measurements of void fraction by an improved multi-channel conductance void meter Song, CH; Chung, MK; No, Hee Cheon, NUCLEAR ENGINEERING AND DESIGN, v.184, no.2-3, pp.269 - 285, 1998-08 |
Measuring Situation Awareness of Operating Team in Different Main Control Room Environments of Nuclear Power Plants Lee, Seung-Woo; Kim, Ar Ryum; Park, Jinkyun; Kang, Hyun Gook; Seong, Poong Hyun, NUCLEAR ENGINEERING AND TECHNOLOGY, v.48, no.1, pp.153 - 163, 2016-02 |
Measuring situation awareness of operation teams in NPPs using a verbal protocol analysis Lee, Seung-Woo; Park, Jin-Kyun; Kim, Ar-Ryum; Seong, Poong-Hyun, ANNALS OF NUCLEAR ENERGY, v.43, pp.167 - 175, 2012-05 |
Measuring the social value of nuclear energy using contingent valuation methodology Jun, Eunju; Kim, Wonjoon; Jeong, Yong Hoon; Chang, Soon-Heung, ENERGY POLICY, v.38, pp.1470 - 1476, 2010-03 |
Mechanical alloying process of 93W-5.6Ni-1.4Fe tungsten heavy alloy 류호진; Hong, Soon-Hyung; Baek, WH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.63, no.1-3, pp.292 - 297, 1997-01 |
Mechanical analysis of high power internally cooled annular fuel Zhao, JY; No, Hee Cheon; Kazimi, MS, NUCLEAR TECHNOLOGY, v.146, no.2, pp.164 - 180, 2004-05 |
Mechanical analysis of surface-coated zircaloy cladding Lee, Youho; Lee, Jeong-Ik; No, Hee Cheon, NUCLEAR ENGINEERING AND TECHNOLOGY, v.49, no.5, pp.1031 - 1043, 2017-08 |
Mechanical Characterization of Collagen Hydrogels by Quasistatic Uniaxial Tensile Experiments Kim, JiEung; Lee, Sangmin; Gu, Chang-Yeon; Kim, Taek-Soo; Kong, Hyunjoon; Jang, Dongchan, ADVANCED ENGINEERING MATERIALS, v.25, no.21, 2023-11 |
Mechanical factors in primary water stress corrosion cracking of cold-worked stainless steel Al Hammadi, Rashid; Yi, Yongsun; Zaki, Wael; Cho, Pyungyeon; Jang, Changheui, NUCLEAR ENGINEERING AND DESIGN, v.301, pp.24 - 31, 2016-05 |
Mechanical property enhancement of ultra-thin PBI membrane by electron beam irradiation for PEM fuel cell Lai, Shiauwu; Park, Jiwon; Cho, Sung-Oh; Tsai, Mingchih; Lim, Hyungsan; Chen, Kueihsien, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.41, no.22, pp.9556 - 9562, 2016-06 |
Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel Jang, Changheui; Lee, Jounghoon; Kim, Jong Sung; Jin, Tae Eun, INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, v.85, no.9, pp.635 - 646, 2008-09 |
Mechanical, dielectric and structural characterization of cross-linked PEG-diacrylate/ethylammonium nitrate ionogels Lopez-Barron, Carlos R.; Beltramo, Peter J.; Liu, Yun; Choi, Sung-Min; Lee, Min-Jae, POLYMER, v.87, pp.300 - 307, 2016-03 |
Mechanisms , Experimental Results , Empirical Correlations and Analytic Models of Heat Transfer in Containment Building Following a LOCA 장순흥; 최종호, NUCLEAR ENGINEERING AND TECHNOLOGY , v.15, no.2, pp.123 - 134, 1983 |
Mechanistic CHF model development for subcooled flow boiling in a vertical rectangular channel under low pressure Song, Jung Hyun; Jung, Jun Yeong; Ch, Soon Heung; Jeong, Yong Hoon, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.174, 2021-08 |
Mechanistic insights into molybdenum immobilization within geopolymer waste form Yun, Jong-Il; Iqbal, Sajid; Lee, Sujeong; Ryu, Ho Jin, Microporous and Mesoporous Materials, v.379, pp.113291, 2024-11 |
MEMS-based in-situ tensile experiments designed to arrest catastrophic failure in brittle nanomaterials Ahn, Daehyeok; Kim, Dae-Gon; Lee, Hansuek; Jang, Dongchan, EXTREME MECHANICS LETTERS, v.41, pp.101071, 2020-11 |
Meso-scale modeling and simulation for reduced activation ferritic/martensitic steel Jeong, Woojin; Na, Ye-eun; Jang, Dongchan; Le, Myoung-Gyu, FUSION ENGINEERING AND DESIGN, v.146, pp.232 - 235, 2019-09 |
Meso-scale multi-physics full coupling within porous CRUD deposits on nuclear fuel Park, Byung Gi; Seo, Seungjin; Kim, Sung Joong; Kim, Ji Hyun; Choi, Sungyeol, JOURNAL OF NUCLEAR MATERIALS, v.512, pp.100 - 117, 2018-12 |
Mesoscopic scale structures in self-organized surfactant solutions determined by small-angle neutron scattering Chen, SH; Choi, SungMin, SUPRAMOLECULAR SCIENCE, v.5, no.3-4, pp.197 - 206, 1998 |
Metallurgical considerations for the fabrication of low-enriched uranium dispersion targets with a high density for Mo-99 production Ryu, Ho Jin; Jung, Yong Jin; Nam, Ji Min; Park, Jong Man, JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY, v.305, no.1, pp.31 - 39, 2015-07 |
Method for Inference of Operators' Thoughts from Eye Movement Data in Nuclear Power Plants Ha, Jun Su; Byon, Young-Ji; Baek, Joonsang; Seong, Poong-Hyun, NUCLEAR ENGINEERING AND TECHNOLOGY, v.48, no.1, pp.129 - 143, 2016-02 |
Method of characteristic direction probabilities for heterogeneous lattice calculation Hong, SG; Cho, Nam-Zin, NUCLEAR SCIENCE AND ENGINEERING, v.132, no.1, pp.65 - 77, 1999-05 |
Methodology of CFD analysis for evaluating H-2 explosion accidents in an open space Kang, Hyung Seok; No, Hee-Cheon; Kim, Sang Baik; Kim, Min Hwan, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.40, no.7, pp.3075 - 3090, 2015-02 |
Micelle-Assisted Formation of Nanoparticle Superlattices and Thermally Reversible Symmetry Transitions Ha, Jae-Min; Lim, Sung-Hwan; Dey, Jahar; Lee, Sang Jo; Lee, Min-Jae; Kang, Shin Hyun; Jin, Kyeong Sik; et al, NANO LETTERS, v.19, no.4, pp.2313 - 2321, 2019-04 |
Micro-beam bending of FCC bicrystals: A comparison between defect dynamics simulations and experiments Aragon, Nicole K.; Na, Ye-eun; Nguyen, Phu Cuong; Jang, Dongchan; Ryu, Ill, MATERIALIA, v.32, 2023-12 |
Micro/Nanostructured Arrays: Fabrication, Applications, and Devices Li, Yue; Cao, Bingqiang; Sun, Fengqiang; Cho, Sung Oh, JOURNAL OF NANOMATERIALS, pp.306479 - 306479, 2013 |
Microbial safety and quality attributes of milk following treatment with atmospheric pressure encapsulated dielectric barrier discharge plasma Kim, Hyun-Joo; Yong, Hae In; Park, Sang Hoo; Kim, Ki Jung; Choe, Wonho; Jo, Cheorun, FOOD CONTROL, v.47, pp.451 - 456, 2015-01 |
Micropatterning of Cells on Electron-Irradiated Poly(dimethylsiloxane) Surface Lee, Eun Je; Hwang, In-Tae; Jung, Chan-Hee; Kwon, Ho-Je; Choi, Jae-Hak; Hur, Min Goo; Cho, Sung Oh; et al, JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, v.9, no.3, pp.461 - 466, 2013-03 |
Micropillar compression study of the influence of size and internal boundary on the strength of HT9 tempered martensitic steel Lim, Sangyeob; Shin, Chansun; Heo, Jungwoo; Kim, Sangeun; Jin, Hyung-Ha; Kwon, Junhyun; Guim, Hwanuk; et al, JOURNAL OF NUCLEAR MATERIALS, v.503, pp.263 - 270, 2018-05 |
Microstructural changes of globules in calcium-silicate-hydrate gels with and without additives determined by small-angle neutron and X-ray scattering Chiang, Wei-Shan; Fratini, Emiliano; Ridi, Francesca; Lim, Sung-Hwan; Yeh, Yi-Qi; Baglioni, Piero; Choi, Sung-Min; et al, JOURNAL OF COLLOID AND INTERFACE SCIENCE, v.398, pp.67 - 73, 2013-05 |
Microstructural control of and mechanical properties of mechanically alloyed tungsten heavy alloys Ryu, Ho Jin; Hong, Soon-Hyung; Lee, Sung; Baek, Woon H., METALS AND MATERIALS INTERNATIONAL, v.5, no.2, pp.185 - 191, 1999-04 |
Microstructural Evolution of Al-Zn-Mg-Cu Alloys in Accordance with Homogenization Time An, Woojin; Heo, Jaewon; Jang, Dongchan; Euh, Kwang Jun; Jung, Im Doo; Kim, Sangshik; Sung, Hyokyung, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.20, no.11, pp.6890 - 6896, 2020-11 |
Microstructure and creep resistance of a diffusionally aluminized Ni-base superalloy Sah, Injin; Kim, Sung Hwan; Jang, Changheui, METALS AND MATERIALS INTERNATIONAL, v.22, no.6, pp.1033 - 1040, 2016-11 |
Microstructure and hydride embrittlement of zirconium model alloys containing niobium and tin Oh, Seung Jin; Jang, Changheui; Kim, Jun Hwan; Jang, Changheui, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.10-11, pp.3771 - 3776, 2011-04 |
Microstructure and mechanical behavior of mechanically alloyed ODS Ni-base superalloy for aerospace gas turbine application Park, LJ; Ryu, Ho Jin; Hong, Soon-Hyung; Kim, YG, ADVANCED PERFORMANCE MATERIALS, v.5, no.4, pp.279 - 290, 1998-12 |
Microstructure and mechanical properties of mechanically alloyed and solid-state sintered tungsten heavy alloys Ryu, Ho Jin; Hong, Soon-Hyung; Baek, WH, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.291, no.1-2, pp.91 - 96, 2000-10 |
Microstructure and mechanical properties of SiC-nanowire-augmented tungsten composites Lee, Dongju; Park, Heesub; Ryu, Ho Jin; Jeon, Seokwoo; Hong, Soon-Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.509, no.37, pp.9060 - 9064, 2011-09 |
Microstructure and Tensile Properties of Diffusion Bonded Austenitic Fe-Base Alloys-Before and After Exposure to High Temperature Supercritical-CO2 Kim, Sung Hwan; Cha, Ji-Hwan; Jang, Changheui; Sah, Injin, METALS, v.10, no.4, 2020-04 |
Microstructure evolution of a Ni-Cr-W superalloy during long-term aging at high temperatures Lee, Ho Jung; Kim, Hyunmyung; Kim, Donghoon; Jang, Changheui, MATERIALS CHARACTERIZATION, v.106, pp.283 - 291, 2015-08 |
Microstructure of as atomized and annealed U-Mo7 particles: A SEM/EBSD study of grain growth Iltis, X.; Zacharie-Aubrun, I.; Ryu, Ho Jin; Park, J. M.; Leenaers, A.; Yacout, A. M.; Keiser, D. D.; et al, JOURNAL OF NUCLEAR MATERIALS, v.495, pp.249 - 266, 2017-11 |
Microstructure, mechanical property and Hall-Petch relationship of a light-weight refractory Al0.1CrNbVMo high entropy alloy fabricated by powder metallurgical process Kang, Byungchul; Lee, Junho; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.767, pp.1012 - 1021, 2018-10 |
Microstructures and enhanced mechanical properties of an oxide dispersion -strengthened Ni-rich high entropy superalloy fabricated by a powder metallurgical process Kong, Taeyeong; Kang, Byungchul; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.839, 2020-10 |
Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy Pohan, Rizaldy M.; Gwalani, Bharat; Lee, Junho; Alam, Talukder; Hwang, J. Y.; Ryu, Ho Jin; Banerjee, Rajarshi; et al, MATERIALS CHEMISTRY AND PHYSICS, v.210, pp.62 - 70, 2018-05 |
Microstructures, tensile properties and corrosion behaviors of Fe20Cr25NiNb stainless steels with different Al contents in supercritical carbon dioxide Chen, Hongsheng; Luo, Jiandong; Zhang, Tengfei; Jang, Changheui; Tang, Rui; Dong, Baojun; Li, Jin; et al, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.23, pp.5246 - 5259, 2023-03 |
Microtomography with sandwich detectors for small-animal bone imaging Kim, S. H.; Kim, D. W.; Kim, D.; Youn, H.; Cho, Seungryong; Kim, H. K., JOURNAL OF INSTRUMENTATION, v.11, 2016-10 |
Microwave-assisted plasma ignition in a constant volume combustion chamber Hwang, Joonsik; Bae, Choongsik; Park, Jooyoung; Choe, Wonho; Cha, Jeonghwa; Woo, Soohyung, COMBUSTION AND FLAME, v.167, pp.86 - 96, 2016-05 |
Minimization of the sample temperature deviation and the effect of current during high-temperature compressive creep testing by the spark plasma sintering apparatus Sweidan, Faris B.; Kim, Dong Hun; Ryu, Ho Jin, MATERIALIA, v.9, 2020-03 |
Discover