Browse "MS-Journal Papers(저널논문)" by Author Zhang, Shuye

Showing results 1 to 28 of 28

1
A novel insight into Au-Au thermosonic flip chip joint under extreme thermal cycles: Defect characterization and failure analysis

Liu, Jinhong; Hua, Yaling; Liu, Junfu; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, SURFACES AND INTERFACES, v.44, 2024-01

2
A Study on Polyvinylidene Difluoride (PVDF) Anchoring Polymer Layer (APL) Solder Anisotropic Conductive Films (ACFs) for Fine-Pitch Flex-on-Flex (FOF) Interconnection

Song, Lu; Yoon, Dal-Jin; Zhang, Shuye; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.10, no.3, pp.368 - 377, 2020-03

3
A Study on the Bonding Conditions and Nonconductive Filler Contents on Cationic Epoxy-Based Sn-58Bi Solder ACFs Joints for Reliable Flex-on-Board Applications

Zhang, Shuye; Lin, Tiesong; He, Peng; Zhao, Ning; Huang, Mingliang; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.7, no.12, pp.2087 - 2094, 2017-12

4
A Study on the Failure Mechanism and Enhanced Reliability of Sn58Bi Solder Anisotropic Conductive Film Joints in a Pressure Cooker Test Due to Polymer Viscoelastic Properties and Hydroswelling

Zhang, Shuye; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.2, pp.216 - 223, 2016-02

5
A Study on the Optimization of Anisotropic Conductive Films for Sn-3Ag-0.5Cu-Based Flex-on-Board Application at a 250 degrees C Bonding Temperature

Zhang, Shuye; Yang, Ming; Wu, Yang; Du, Jikun; Lin, Tiesong; He, Peng; Huang, Mingliang; et al, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.8, no.3, pp.383 - 391, 2018-03

6
A study on the resistivity and mechanical properties of modified nano-Ag coated Cu particles in electrically conductive adhesives

Zhang, Shuye; Qi, Xiaoquan; Yang, Ming; Cao, Yang; Lin, Tiesong; He, Peng; Paik, Kyung-Wook, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, v.30, no.10, pp.9171 - 9183, 2019-05

7
A Study on the Solder Ball Size and Content Effects of Solder ACFs for Flex-on-Board Assembly Applications Using Ultrasonic Bonding

Zhang, Shuye; Kim, Seung-Ho; Kim, Tae-Wan; Kim, Yoo Sun; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.5, no.1, pp.9 - 14, 2015-01

8
A Study on Transmission properties of AuNi coated polymer ball joint and Sn58Bi solder joint for flex-on-board interconnection

Zhang, Shuye; Park, Junyong; Park, Gapyeol; Kim, Joungho; Paik, Kyung-Wook; He, Peng, JOURNAL OF ADVANCED JOINING PROCESSES, v.5, 2022-06

9
Crack mechanism correlated with Sn grain orientations on Ni metal surface subjected to 1000 thermal shocks

Jing, Xinyi; Luo, Keyu; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.26, pp.1663 - 1668, 2023-09

10
Cu-Cu joining using citrate coated ultra-small nano-silver pastes

Zhang, Shuye; Wang, Qian; Lin, Tiesong; Zhang, Pengzhe; He, Peng; Paik, Kyung-Wook, JOURNAL OF MANUFACTURING PROCESSES, v.62, pp.546 - 554, 2021-02

11
Effect of microwave hybrid susceptors on the interface morphology, mechanical properties and fracture morphology of Cu/ nano-Sn-3.0Ag-0.5Cu/Cu joints

Zhang, Shuai; Zhou, Hongzhi; Ding, Tianran; Long, Weimin; Zhong, Sujuan; Paik, Kyung-Wook; He, Peng; et al, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.28, pp.1743 - 1751, 2024-01

12
Effect of Nanofiber Orientation on Nanofiber Solder Anisotropic Conductive Films Joint Properties and Bending Reliability of Flex-on-Flex Assembly

Kim, Tae-Wan; Lee, Tae-Ik; Pan, Yan; Kim, Wansun; Zhang, Shuye; Kim, Taek-Soo; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.9, 2016-09

13
Effects of acrylic adhesives property and optimized bonding parameters on Sn-58Bi solder joint morphology for flex-on-board assembly

Zhang, Shuye; Lin, Tiesong; He, Peng; Paik, Kyung-Wook, MICROELECTRONICS RELIABILITY, v.78, pp.181 - 189, 2017-11

14
Effects of Polymer Ball Size and Polyvinylidene Fluoride Nanofiber on the Ball Capture Rate for 100-mu m-Pitch Flex-on-Flex Assembly Using Anisotropic Conductive Films and Ultrasonic Bonding Method

Park, Jae-Hyeong; Kim, Tae Wan; Zhang, Shuye; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.7, pp.1127 - 1134, 2016-07

15
Equilibrium phase diagram design and structural optimization of SAC/ Sn-Pb composite structure solder joint for preferable stress distribution

Xu, Sunwu; Jing, Xinyi; Zhu, Pengyu; Jin, Haoran; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, MATERIALS CHARACTERIZATION, v.206, 2023-12

16
Highly mechanical and high-temperature properties of Cu–Cu joints using citrate-coated nanosized Ag paste in air

Wang, Qian; Zhang, Shuye; Lin, Tiesong; Zhang, Pengzhe; He, Peng; Paik, Kyung-Wook, PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, v.31, no.1, pp.129 - 140, 2021-02

17
Impact of embedded susceptor mass and exposure time on morphological and property alterations in SAC305 joints using microwave hybrid heating

Zhang, Shuai; Zhou, Hongzhi; Ding, Tianran; Long, Weimin; Zhong, Sujuan; Paik, Kyung-Wook; He, Peng; et al, MATERIALS LETTERS, v.357, 2024-02

18
In-situ isothermal aging TEM analysis of a micro Cu/ENIG/Sn solder joint for flexible interconnects

Liu, Jinhong; Xu, Jianhao; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.169, pp.42 - 52, 2024-01

19
Joint Morphologies and Failure Mechanisms of Anisotropic Conductive Films (ACFs) During a Power Handling Capability Test for Flex-On-Board Applications

Zhang, Shuye; Park, Jae-Hyeong; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.12, pp.1820 - 1826, 2016-12

20
Mechanism of Solder Joint Cracks in Anisotropic Conductive Films Bonding and Solutions: Delaying Hot-Bar Lift-Up Time and Adding Silica Fillers

Zhang, Shuye; Yang, Ming; Jin, Ming Liang; Huang, Wen-Can; Lin, Tiesong; He, Peng; Lin, Panpan; et al, METALS, v.8, no.1, 2018-01

21
Numerical Analysis of 3D CSP MEMS Under Thermal Cycle-Impact Coupled Multiphysics Loads

Zhang, Shuye; Sun, Mingjia; Yang, Jianqun; Li, Xingji; He, Peng; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.13, no.1, pp.26 - 33, 2023-01

22
Preparation and characterization of Sn-3.0Ag-0.5Cu nano-solder paste and assessment of the reliability of joints fabricated by microwave hybrid heating

Zhang, Shuai; Zhang, Shuye; Zhou, Hongzhi; Paik, Kyung-Wook; Ding, Tianran; Long, Weimin; Zhong, Sujuan; et al, MATERIALS CHARACTERIZATION, v.207, 2024-01

23
Shear performance and accelerated reliability of solder interconnects for fan-out wafer-level package

Zhang, Shuye; Duan, Ran; Xu, Sunwu; Xue, Panfei; Wang, Chengqian; Chen, Jieshi; Paik, Kyung-Wook; et al, JOURNAL OF ADVANCED JOINING PROCESSES, v.5, 2022-06

24
Strength dependence of epoxy composites on the average filler size of non-oxidized graphene flake

Kim, Jin; Kim, Jungmo; Song, Sungho; Zhang, Shuye; Cha, Jaemin; Kim, Kisun; Yoon, Hyewon; et al, CARBON, v.113, pp.379 - 386, 2017-03

25
The design of low-temperature solder alloys and the comparison of mechanical performance of solder joints on ENIG and ENEPIG interface

Wang, Shaoan; Chen, Xiangyu; Luo, Keyu; Zhou, Hongzhi; Li, Rongqing; He, Peng; Paik, Kyung-Wook; et al, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.5332 - 5339, 2023-11

26
The doped Pd on the crystal calculation and intermetallic property of low-temperature soldered ENEPIG substrates

Zhang, Shuye; Wang, Shaoan; Zhang, Shang; Chen, Xiangyu; Zeng, Chen; Paik, Kyung-Wook; He, Peng, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.7094 - 7099, 2023-11

27
The In-Situ TEM Isothermal Aging Evolution in a μ-Cu/NiAu/Sn/Cu Solder Joint for Full Intermetallic Compounds Interconnects of Flexible Electronics

Liu, Jinhong; Jing, Xinyi; Chen, Jieshi; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, ELECTRONIC MATERIALS LETTERS, v.20, no.3, pp.352 - 361, 2024-05

28
Wettability and interfacial morphology of Sn-3.0Ag-0.5Cu solder on electroless nickel plated ZnS transparent ceramic

Zhang, Shuye; Zhu, Bingxuan; Zhou, Xiang; Wang, Xingxing; Lin, Tiesong; He, Peng; Paik, Kyung-Wook, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, v.30, no.19, pp.17972 - 17985, 2019-10

Discover

Type

Open Access

Date issued

. next

Subject

. next

rss_1.0 rss_2.0 atom_1.0