Browse "MS-Journal Papers(저널논문)" by Author Lee, Zin-Hyoung
Showing results 1 to 35 of 35
| A correction to optimum alloy composition for design of high-temperature high-strength Al-Ti-V-Zr alloys through thermodynamic calculations Park, SI; Han, SZ; Lee, Zin-Hyoung; Lee, HyuckMo, SCRIPTA MATERIALIA, v.37, no.1, pp.93 - 97, 1997 |
| A method for predicting nitrogen gas pores in nitrogen alloying stainless steels Yang, SH; Lee, Zin-Hyoung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.417, no.1-2, pp.307 - 314, 2006-02 |
| A study of characteristics of dynamic aspiration pressure in confined type Gas Atomization Process B.W.Oh; S.P.Hong; Lee, Zin-Hyoung, 대한금속·재료학회지, v.30, pp.1056 - 1062, 1992 |
| Boron effect on solidification in the two phase (NiAl+Ni(3)Al) alloy Lee, Jong-Hoon; Lee, Je-Hyun; Kim, HM; Lee, Zin-Hyoung, HIGH TEMPERATURE MATERIALS AND PROCESSES, v.18, no.3, pp.145 - 149, 1999-02 |
| EFFECT OF ALLOY COMPOSITION ON THE VOLUME FRACTION OF BETA-PHASE IN DUPLEX TITANIUM-ALLOYS Lee, HyuckMo; SOH, JR; Lee, Zin-Hyoung; KIM, YS, SCRIPTA METALLURGICA ET MATERIALIA, v.29, no.4, pp.497 - 501, 1993-08 |
| Effect of inductor coil shape on the free surface shape of molten tin M.J.Ha; Lee, Zin-Hyoung, 한국주조공학회지, v.14, pp.159 - 167, 1994 |
| Effect of oxygen impurity on magnetostriction of directionally solidified Tb(0.3)Dv(0.7)Fe(1.8) Kim, DH; Kwon, OY; Kim, JC; Lee, Zin-Hyoung, IEEE TRANSACTIONS ON MAGNETICS, v.40, no.4, pp.2781 - 2783, 2004-07 |
| Effect of Si and Mn additions on ferrite and austenite phase fractions in 25Cr-7Ni-1.5Mo-3W base super duplex stainless steels (SDSS) Jeong, Sang Won; Lee, Zin-Hyoung; Lee, Hyuck-Mo, ZEITSCHRIFT FUR METALLKUNDE, v.91, no.6, pp.494 - 499, 2000-06 |
| Effect of steady ampoule rotation on axial segregation in vertical Bridgman growth of Terfenol-D Kim, JC; Park, WJ; Lee, Zin-Hyoung; Ye, BJ, JOURNAL OF CRYSTAL GROWTH, v.255, pp.286 - 292, 2003-08 |
| Effect of zirconium in two phase (NiAl+Ni3Al) alloy Lee, JH; Choe, BH; Lee, Zin-Hyoung; Kim, HM, SCRIPTA MATERIALIA, v.40, no.7, pp.853 - 857, 1999-03 |
| EXPERIMENTAL INVESTIGATION OF CONVECTION DURING VERTICAL BRIDGMAN GROWTH OF DILUTE AL-MG ALLOYS Lee, Zin-Hyoung; LEE, BJ; KANG, MS; CHUNG, SM; CORIELL, SR, JOURNAL OF CRYSTAL GROWTH, v.141, no.1-2, pp.209 - 218, 1994-08 |
| Fabrication of polycrystalline Si wafer by vacuum casting and the effect of mold coating materials Lee, GH; Lee, Zin-Hyoung, JOURNAL OF CRYSTAL GROWTH, v.233, no.1-2, pp.45 - 51, 2001-11 |
| Lattice matching of D0(23) and D0(22) phases in Al-6at%(Ti,V,Zr) systems Han, SZ; Park, SI; Huh, JS; Lee, Zin-Hyoung; Lee, HyuckMo, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.230, no.1-2, pp.100 - 106, 1997 |
| Macrosegregation in Bridgman growth of Terfenol-D and effects of annealing Park, WJ; Kim, JC; Ye, BJ; Lee, Zin-Hyoung, JOURNAL OF CRYSTAL GROWTH, v.212, no.1-2, pp.283 - 290, 2000-04 |
| Magnetostrictive properties of TbxDy1-xFey (x=0.3, 0.33; y=1.05, 1.36, 1.65) composite made by directional solidification and polymer infiltration Kwon, OY; Kimb, JC; Kwon, YD; Yang, DJ; Lee, SH; Lee, Zin-Hyoung, MATERIALS SCIENCE FORUM, v.475-479, pp.2247 - 2250, 2005 |
| Mathematical model for the dynamic P-C-T curves of the MmNi(4.6)Al(0.2)Fe(0.2)V(0.03) alloy in a tubular reactor Lee, SG; Lee, KY; Kim, TG; Lee, Zin-Hyoung; Lee, Jai Young, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.21, no.9, pp.733 - 740, 1996-09 |
| Mechanical and magnetic properties of a novel polymer infiltrated directionally solidified RE-Fe giant magnetostrictive materials Kwon, OY; Kwon, YD; Kim, DH; Kim, JC; Lee, Zin-Hyoung, IEEE TRANSACTIONS ON MAGNETICS, v.40, no.4, pp.2778 - 2780, 2004-07 |
| Modeling of magnetostriction in grain aligned terfenol-D and preferred orientation change of terfenol-D dendrites Park, WJ; Son, DR; Lee, Zin-Hyoung, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, v.248, no.2, pp.223 - 229, 2002-07 |
| Ni3Al precipitation behavior in the two-phase (NiAl+Ni3Al) alloy Lee, JH; Lee, SY; Lee, Zin-Hyoung; Kim, HM, HIGH TEMPERATURE MATERIALS AND PROCESSES, v.18, no.3, pp.125 - 129, 1999-02 |
| Nitrogen porosity in nitrogen bearing austenitic stainless steel Yang, SH; Lee, Zin-Hyoung, MATERIALS SCIENCE FORUM, v.475-479, pp.2679 - 2682, 2005 |
| Nucleation of liquid Pb-phase in hypermonotectic Al-Pb melt and the segregation of Pb-drops in melt-spun ribbon SUH, YC; Lee, Zin-Hyoung, SCRIPTA METALLURGICA ET MATERIALIA, v.33, no.8, pp.1231 - 1237, 1995-10 |
| Numerical analysis of Marargoni convection in floating zone melting under gravity-free condition T.J.Kim; Y.s.Choe; Lee, Zin-Hyoung; C.S.Kang; H.K.Baik, 대한금속·재료학회지, v.29, no.3, pp.220 - 228, 1991 |
| On the evolution of porosity in spray-deposited tool steels Hu, HM; Lee, Zin-Hyoung; White, DR; Lavernia, EJ, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.31, no.3, pp.723 - 733, 2000-03 |
| Optimization of depositing composite thin films by sputtering process m.farooq; Lee, Zin-Hyoung, 의학물리, v.40, no.3, pp.511 - 515, 2002 |
| Precipitation behavior of Ag-Pd-In dental alloys Suh, YC; Lee, Zin-Hyoung; Ohta, M, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, v.11, no.1, pp.43 - 48, 2000-01 |
| Suppression of the vortex in ladle by static magnetic field Suh, Jun Won; Park, Joonpyo; Kim, Hoyoung; Lee, Zin-Hyoung, ISIJ INTERNATIONAL, v.41, no.7, pp.689 - 695, 2001-07 |
| THE ANODIC BEHAVIOR OF HOT-GALVANIZED ZINC LAYER IN ALKALINE-SOLUTION Pyun, Su Il; BAE, JS; PARK, SY; KIM, JS; Lee, Zin-Hyoung, CORROSION SCIENCE, v.36, no.5, pp.827 - 835, 1994-05 |
| The brittleness of Ag-25%Pd based dental alloys with S contamination Shin, SR; Suh, YC; Lee, Zin-Hyoung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.358, pp.94 - 98, 2003-10 |
| The critical amount of nitrogen on the formation of nitrogen gas pores during solidification of 25Cr-7Ni duplex stainless steels Park, YH; Kim, JW; Kim, SK; Lee, YD; Lee, Zin-Hyoung, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, v.34, pp.313 - 320, 2003-06 |
| The effect of casting method and heat treating condition on cold workability of high-Si electrical steel Shin, JS; Lee, Zin-Hyoung; Lee, Taek Dong; Lavernia, EJ, SCRIPTA MATERIALIA, v.45, no.6, pp.725 - 731, 2001-09 |
| The effect of grain refining and oxide inclusion on the fluidity of Al4.5Cu-0.6Mn and A356 alloys Kwon, YD; Lee, Zin-Hyoung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.360, pp.372 - 376, 2003-11 |
| The effect of heat treatments and Si contents on B2 ordering reaction in high-silicon steels Yu, JH; Shin, JS; Bae, JS; Lee, Zin-Hyoung; Lee, Taek Dong; Lee, HyuckMo; Lavernia, EJ, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.307, no.1-2, pp.29 - 34, 2001 |
| The mechanism of porous column formation during spray forming Lee, Zin-Hyoung; Hu, MM; Lavernia, EJ; White, DR, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.30, no.6, pp.1679 - 1682, 1999-06 |
| The movement of the concave casting surface during mushy-type solidification and its effect on the heat-transfer coefficient Lee, Zin-Hyoung; Kim, TG; Choi, YS, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, v.29, no.5, pp.1051 - 1056, 1998-10 |
| Unidirectional magnetostrictive terfenol/epoxy composite Kim, JC; Kwon, OY; Lee, Zin-Hyoung, APPLIED PHYSICS LETTERS, v.84, no.12, pp.2130 - 2132, 2004-03 |
Discover
Open Access
- 265 OA Article
Date issued
- 1,016 2020 - 2024
- 2,625 2010 - 2019
- 2,168 2000 - 2009
- 1,240 1990 - 1999
- 179 1980 - 1989