DC Field | Value | Language |
---|---|---|
dc.contributor.author | EO, K | ko |
dc.contributor.author | Choo, Woong Kil | ko |
dc.date.accessioned | 2013-02-25T02:26:02Z | - |
dc.date.available | 2013-02-25T02:26:02Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1993 | - |
dc.identifier.citation | FERROELECTRICS, v.138, no.1-4, pp.79 - 86 | - |
dc.identifier.issn | 0015-0193 | - |
dc.identifier.uri | http://hdl.handle.net/10203/59105 | - |
dc.description.abstract | The sintering temperature of Pb(Mg1/3Nb2/3)O3 ceramics has been lowered to below 980-degrees-C by addition of V2O5. However, excess V2O5 addition has resulted in the unwanted formation of lead vanadates whereas the pyrochlore lead magnesium niobate content decreased. A dielectric constant maximum value, 14000, has been obtained after 1 hr sintering at 980-degrees-C of the specimens doping with 1 mole% V2O5 which has maximum volume fraction of the perovskite Pb(Mg1/3Nb2/3)O3. This value is only slightly smaller than that of pure Pb(Mg1/3Nb2/3)O3 ceramics sintered 1 hr at 1250-degrees-C. | - |
dc.language | English | - |
dc.publisher | GORDON BREACH SCI PUBL LTD | - |
dc.subject | LEAD-MAGNESIUM-NIOBATE | - |
dc.title | EFFECTS OF V2O5 DOPING ON SINTERING AND DIELECTRIC-PROPERTIES OF PB(MG1/3NB2/3)O3 CERAMICS | - |
dc.type | Article | - |
dc.identifier.wosid | A1993KV89200007 | - |
dc.type.rims | ART | - |
dc.citation.volume | 138 | - |
dc.citation.issue | 1-4 | - |
dc.citation.beginningpage | 79 | - |
dc.citation.endingpage | 86 | - |
dc.citation.publicationname | FERROELECTRICS | - |
dc.identifier.doi | 10.1080/00150199308017716 | - |
dc.contributor.nonIdAuthor | EO, K | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordPlus | LEAD-MAGNESIUM-NIOBATE | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.