(A) study on the ceramic material processing by ultrasonic spray pyrolysis and electric chemical method분무열분해 및 전기화학법을 이용한 세라믹 소재의 제조 공정에 관한 연구

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 703
  • Download : 0
DC FieldValueLanguage
dc.contributor.advisorYang, Ji-Won-
dc.contributor.advisor양지원-
dc.contributor.authorChoi, Kwan-Young-
dc.contributor.author최관영-
dc.date.accessioned2011-12-13T01:39:51Z-
dc.date.available2011-12-13T01:39:51Z-
dc.date.issued2005-
dc.identifier.urihttp://library.kaist.ac.kr/search/detail/view.do?bibCtrlNo=249427&flag=dissertation-
dc.identifier.urihttp://hdl.handle.net/10203/28973-
dc.description학위논문(박사) - 한국과학기술원 : 생명화학공학과, 2005.8, [ xi, 99 p. ]-
dc.description.abstract\\\\documentclass{article} \\\\usepackage{hfont} \\\\begin{document} LiCoO$_{2}$ powders for lithium secondary battery were successfully prepared by the ultrasonic spray pyrolysis process. In this work, the statistical experimental design method was used to compare the characteristics (particle size, standard deviation, surface area, tab density) of the LiCoO$_{2}$ particles according to the four parameters (synthesis temperature, sintering temperature, sintering time, sintering heating rate). It was found that the optimal synthesis conditions for the synthesis of LiCoO$_{2}$ particles in ultrasonic spray pyrolysis process were as follows; (synthesis temperature: 835 $\\\\sim$ 840 ℃, sintering temperature: 890 $\\\\sim$ 900℃, sintering time: 10 $\\\\sim$ 11hr, sintering heating rate: 580 $\\\\sim$ 590℃ $/$ hr). The above-mentioned optimal conditions were used to prepare the particles with particle size 4.7㎛(standard deviation: $\pm$ 1.3%) and the experimental results were in a good agreement with simulated values. The oxide powders were characterized by scanning electron microscopy, X-ray diffraction, and electrochemical method including charge-discharge cycling. The characteristics as a cathode for lithium ion battery depended on the sintering temperature and sintering time. Consequently, LiCoO$_{2}$ powders made by the ultrasonic spray pyrolysis process displayed a good electrochemical performance and the experimental design method was well applied. The synthesis of spherical hollow silica particles from sodium silicate solution with boric acid or urea as an additive was carried out by ultrasonic spray pyrolysis method. This work dealt with the effect of four parameters (boric acid, urea, feed rate of reactant, and reaction temperature) on particle size and standard deviation. As a result, the mean particle size and standard deviation decreased with increasing of all parameters except urea. In addition, silica particles with ...eng
dc.languageeng-
dc.publisher한국과학기술원-
dc.subjectSodium silicate-
dc.subjectBoric acid-
dc.subjectUltrasonic spray pyrolysis-
dc.subjectHollow silica-
dc.subjectUrea-
dc.subject요소-
dc.subject규산 나트륨-
dc.subject붕산-
dc.subject분무열분해-
dc.subjectHollow silica-
dc.subjectSodium silicate-
dc.subjectBoric acid-
dc.subjectUltrasonic spray pyrolysis-
dc.subjectHollow silica-
dc.subjectUrea-
dc.subject요소-
dc.subject규산 나트륨-
dc.subject붕산-
dc.subject분무열분해-
dc.subjectHollow silica-
dc.title(A) study on the ceramic material processing by ultrasonic spray pyrolysis and electric chemical method-
dc.title.alternative분무열분해 및 전기화학법을 이용한 세라믹 소재의 제조 공정에 관한 연구-
dc.typeThesis(Ph.D)-
dc.identifier.CNRN249427/325007 -
dc.description.department한국과학기술원 : 생명화학공학과, -
dc.identifier.uid000985374-
dc.contributor.localauthorYang, Ji-Won-
dc.contributor.localauthor양지원-
Appears in Collection
CBE-Theses_Ph.D.(박사논문)
Files in This Item
There are no files associated with this item.

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0