2681 | 디젤 예혼합 압축착화엔진에서 모사 배기가스재순환과 과급에 따른 연소특성 = Effect of simulated EGR and supercharging on the combustion in a diesel HCCI enginelink 박세익; Park, Se-Ik; 배충식; 신현동; et al, 한국과학기술원, 2006 |
2682 | 비전도성 액체의 전하주입형 2-유체 연소 노즐에 대한 실험적 분무 특성 연구 = An experimental study on spray characterisitcs of charge injected 2-fluid combustion nozzle for non-conducting liquidlink 박민규; Park, Min-Gyu; et al, 한국과학기술원, 2006 |
2683 | 충돌 모델로 충격량을 이용한 가상 휴보 플랫폼의 개발 = Development of virtual Hubo platform using impulse as collision modellink 김인혁; Kim, In-Hyeok; et al, 한국과학기술원, 2006 |
2684 | 하이브리드 강철/복합재료 원판형 절삭 공구에 관한 연구 = A study on the hybrid circular plate cutting tool composed of steel and composite structureslink 김병중; Kim, Byoung-Jung; et al, 한국과학기술원, 2006 |
2685 | Mobile robot simultaneous localization and map building (SLAM) using sensor fusion = 센서 융합을 이용한 모바일 로봇 위치 추정 및 지도 작성 알고리즘link Song, Xingyong; 송싱용; et al, 한국과학기술원, 2006 |
2686 | Finite element investigation of instability in hot bar rolling process = 열간 선재 압연공정의 유동불안정에 대한 유한요소 해석link Awais, Muhammad; 아와이스, 모하메드; et al, 한국과학기술원, 2006 |
2687 | 엔진 흡기계 공기 여과기의 음향 특성에 관한 연구 = A study on the acoustical characteristics of the air filter in engine intake systemslink 강장훈; Kang, Jang-Hoon; et al, 한국과학기술원, 2006 |
2688 | 진동 둔감 광간섭계를 이용한 실리콘 웨이퍼 표면형상 측정 = Profile measurement of silicon wafers using a vibration-desensitized optical interferometerlink 권택민; Kwon, Taek-min; et al, 한국과학기술원, 2006 |
2689 | 강한 난류 대향 제트 화염에 관한 실험적 연구 = An experimental study on high intensity turbulent counter jet flamelink 고일민; Ko, Il-Min; et al, 한국과학기술원, 2006 |
2690 | 공리 설계를 이용한 모바일 로봇 도킹 스테이션의 개발 = Development of docking station for mobile robot using axiomatic designlink 이경운; Lee, Kyung-Woon; et al, 한국과학기술원, 2006 |
2691 | 플립칩의 위치 정렬을 위한 듀얼광학계 구성 및 비주얼 서보잉 연구 = Configuration of dual imaging system and study of visual servoing method for flip-chip alignmentlink 이달재; Lee, Dal-Jae; et al, 한국과학기술원, 2006 |
2692 | 표면조도가 난류경계층에 미치는 영향 = Roughness effect on a turbulent boundary layerlink 김정훈; Kim, Jung-Hun; et al, 한국과학기술원, 2006 |
2693 | Prediction of cold forging tool-life based on finite element analyses = 유한요소해석에 기반한 냉간 단조 수명 예측link Sarosh, Muhammad Adnan; 사루시, 모하메드 아드난; et al, 한국과학기술원, 2006 |
2694 | 열 대류 방식 가속도 센서의 성능향상에 관한 연구 = A study on the performance improvement of a micromachined convective accelerometerlink 오준석; Oh, Jun-Seok; et al, 한국과학기술원, 2006 |
2695 | 음향 계의 해석을 위한 시간영역 경계요소법에 관한 연구 = A study on the time domain boundary element method for the analysis of acoustical systemslink 장해원; Jang, Hae-Won; et al, 한국과학기술원, 2006 |
2696 | 저부하에서 Dimethyl Ether 압축착화 엔진연소 특성 = Compression ignition combustion of dimethyl ether in a single cylinder engine at low load conditionslink 백철우; Baek, Cheul-Woo; 배충식; 신현동; et al, 한국과학기술원, 2006 |
2697 | 미케니컬 시일의 성능해석에 관한 연구 = A study on the analysis of mechanical seallink 김정훈; Kim, Jeong-Hun; et al, 한국과학기술원, 2006 |
2698 | 마모된 저널베어링의 정특성에 관한 수치해석 = Numerical analysis of journal bearings with worn zone : static characteristicslink 손길호; Sohn, Gil-Ho; et al, 한국과학기술원, 2006 |
2699 | 골반 부착형 비구컵 항행시스템의 개발 = Development of acetabular cup navigation system which is attached to pelvislink 김원수; Kim, Won-Su; et al, 한국과학기술원, 2006 |
2700 | 자동차 실내공간의 열적 쾌적성 = Thermal comfort in automotivelink 홍성호; Hong, Sung-Ho; et al, 한국과학기술원, 2006 |