1 | ABAQUS 아탄성 수식화를 이용한 용접공정의 유한요소해석 = Finite element analysis of welding processes by way of abaqus hypoelastic formulationlink 한유성; Han, You-Sung; et al, 한국과학기술원, 2009 |
2 | Analysis of wrinkling membranes by meshfree method = 무요소법을 이용한 막 구조물의 주름 해석link Kim, Sung-Youb; 김성엽; et al, 한국과학기술원, 2000 |
3 | Cowl cross bar의 용접 변형 설계 코드 개발 = Code development for deformation design in welding of cowl cross barlink 박종연; Park, Jong-Youn; et al, 한국과학기술원, 2003 |
4 | Delamination cracks originating from transversecracking in a corss-ply composite laminate under anti-plane shear and plane strain bending = 면외 전단과 평면 변형율 굽힘을 받는 직교이방성 복합적층판의 횡균열에서 발생한 적층분리균열link Kim, Yu-Jun; 김유준; et al, 한국과학기술원, 1991 |
5 | EFG 방법을 이용한 전단띠 해석 = Analysis of shear band via element free galerkin methodlink 조영삼; Cho, Young-Sam; et al, 한국과학기술원, 1999 |
6 | Explicit code를 이용한 lower control arm의 stamping 해석 = Analysis for stamping of the lower control arm using an explicit codelink 하원필; Ha, Won-Pil; et al, 한국과학기술원, 1994 |
7 | Finite element analysis for large axisymmetric deformations of plastic and viscoplastic materials with plastic spin = 소성스핀을 수반하는 소성 및 점소성 재료의 축대칭 대변형에 관한 유한요소 해석link Kim, Young; 김용; et al, 한국과학기술원, 1991 |
8 | MPI를 이용한 병렬 다층 프론탈 유한요소해석 = Finite element analysis via parallel multi-level frontal solver based upon MPIlink 심규호; Sim, Kyu-Ho; et al, 한국과학기술원, 2002 |
9 | Shadow mask의 열변형 해석 = Thermal deformation analysis of a shadow masklink 김현규; Kim, Hyeon-Gyu; et al, 한국과학기술원, 1993 |
10 | Spiral seam 용접강관의 잔류응력 해석 = Residual stress analysis of spiral seam welding pipeslink 김건탁; Kim, Kun-Tak; et al, 한국과학기술원, 2005 |
11 | Stress analysis near delamination cracks originated from transverse cracking in cross-ply composite laminates using hybrid F.E.M = 혼성 유한 요소법을 이용한 수직균열 선단에서 접착면에 따라 적층분리 균열이 발생한 직교이방성 복합적층판의 응력해석link Jang, Jae-Sang; 장재상; et al, 한국과학기술원, 1990 |
12 | Three dimensional slow viscous flow due to the motion of a sphere moving perpendicularly to the axis of a circular cylinder = 원관축에 수직으로 움직이는 구에 의한 3차원의 느린 점성류link Im, Se-Young; 임세영; et al, 한국과학기술원, 1978 |
13 | Total lagrangian 관점으로 취급된 유한회전을 이용한 보구조물의 비선형 유한요소해석 = Non-linear finite element analysis for a flexible beam structure with finite rotation which is treated from a total lagrangian point of viewlink 정진호; Jeong, Jin-Ho; et al, 한국과학기술원, 1992 |
14 | 가느다란 보 구조물의 Total lagrangian 유한요소 해석 = Total lagrangian finite element analysis for a flexible beam structurelink 정동원; Jung, Dong-Won; et al, 한국과학기술원, 1991 |
15 | 강체와 접합된 고무의 균열에 대한 유한 요소 해석 = Finite element analysis for cracks in rubber bonded to a rigid materiallink 김창식; Kim, Chang-Sik; et al, 한국과학기술원, 1993 |
16 | 기계적 충격 및 열하중을 받는 모터구조물 냉각관의 피로설계 = Fatigue design of cooling pipes in electric motor structure under mechanical shock and thermal loadinglink 김정도; Kim, Jung-Do; et al, 한국과학기술원, 2012 |
17 | 나노압입과 나노리소그래피의 원자수준 전산모사 = Atomistic simulations of nanoindentation and nanolithographylink 이영민; Lee, Young-Min; et al, 한국과학기술원, 2004 |
18 | 다면적분에 의한 삼차원 보요소를 이용한 보의 탄성 대변형에 대한 유한요소해석 = A finite element analysis for large elastic deformations of a beam using a cross-section integrated 3-dimensional beam elementlink 박기철; Park, Kee-Cheol; et al, 한국과학기술원, 1990 |
19 | 다층 칩 패키지의 변형 및 균열 해석 = Analysis of deformations and cracks in multi-chip packageslink 박정순; Park, Jeong-Soon; et al, 한국과학기술원, 2006 |
20 | 동적 하중을 받는 반무한체에서 Mode I 균열진전의 유한요소 해석 = Finite element analysis of Mode I crack-growth in a semi-infinite body under dynamic loadinglink 오성은; Oh, Seong-Eun; et al, 한국과학기술원, 2012 |
21 | 동적 효과를 고려한 크레인 전도 안정성의 유한요소 해석 = Finite element analysis for overturning stability of telescopic crane including dynamic effectslink 이용우; Lee, Yong-Woo; 엄윤용; 임세영; et al, 한국과학기술원, 1996 |
22 | 면심입방 구조 나선전위의 cross-slip에 대한 원자수준 전산모사 = Atomistic simulations for cross slip of a screw dislocation in FCC structurelink 박귀종; Park, Kwi-Jong; et al, 한국과학기술원, 2007 |
23 | 버블 패킹 방법을 이용한 자동 사면체 격자 생성 = Automatic tetrahedral mesh generation by bubble packing methodlink 박상일; Park, Sang-Il; et al, 한국과학기술원, 1999 |
24 | 버블 패킹방법을 이용한 적응 격자 생성 = Bubble packing method for adaptive mesh generationlink 김정훈; Kim, Jeong-Hun; 이병채; 임세영; et al, 한국과학기술원, 2001 |
25 | 분출 가스 압력을 받고 있는 고체의 동적 거동 해석 = Dynamic response of a solid subjected to pressure loading due to gushing gas flowlink 김민하; Kim, Min-Ha; et al, 한국과학기술원, 1998 |
26 | 소성스핀을 수반하는 구성방정식을 갖는 탄소성 대변형의 유한요소 해석 = Finite element analysis of large elastic-plastic deformations with a constitutive equation involving plastic spinlink 강석우; Kang, Seok-Woo; et al, 한국과학기술원, 1989 |
27 | 송풍기 임펠러 허브에 대한 유한 요소 해석 프로그램 개발 = Development of a finite element anaysis program for the impeller hub of a blowerlink 김주완; Kim, Ju-Wan; et al, 한국과학기술원, 1997 |
28 | 수직균열 선단에서 접착면을따라 적층분리 균열이 발생한 $[90°/0°]_s$ 복합적층판의 응력분포 = Stress distribution around delamination cracks branched from transverse cracks in $[90°/0°]_s$ composite laminateslink 김홍준; Kim, Hong-Jun; et al, 한국과학기술원, 1989 |
29 | 쉐도우마스크 열변형해석 및 설계용 프로그램의 개발 = Analysis of thermal deformation for a shadow mask and development of the program for thermal deformation designlink 차병우; Cha, Byoung-Woo; et al, 한국과학기술원, 1994 |
30 | 스파이럴 용접강관 제조공정의 유한요소 해석 = Finite element analysis for manufacturing process of spiral seam welding pipeslink 김완재; Kim, Wan-Jae; et al, 한국과학기술원, 2006 |
31 | 실리콘 단결정의 전위 운동성에 관한 분자동역학 전산모사 = Molecular dynamics simulation of dislocation mobility in single crystal siliconlink 이아림; Lee, A-Rim; et al, 한국과학기술원, 2011 |
32 | 안정화 절점적분이 적용된 이동최소제곱 기반 유한요소 = MLS(Moving Least Square)-based finite elements using a stabilized conforming nodal integrationlink 이준호; Lee, Jun-Ho; et al, 한국과학기술원, 2007 |
33 | 에어컨 실외기 열교환기 구조물의 굽힘 소성 가공 해석 및 설계 = Analysis and design of elastoplastic bending process for air conditioner outdoor unit heat exchangerslink 김문홍; Kim, Moon-Hong; et al, 한국과학기술원, 2013 |
34 | 연화 점소성 재료에 대한 Semi-implicit 동적 유한요소해석 = Semi-implicit dynamic finite element analysis for softening viscoplastic materialslink 박종진; Park, Jong-Jin; et al, 한국과학기술원, 1993 |
35 | 열변형 충격에 의한 텔레비전 마찰소음 저감에 관한 연구 = Reduction of frictional impulse noise induced by thermomechanical deformations in TV setslink 표준호; Pyo, Joon-Ho; et al, 한국과학기술원, 2005 |
36 | 용접의 열적해석을 위한 유한요소 프로그램의 개발 = Development of finite element program for thermal analysis of welding processeslink 오정원; Oh, Jeong-Won; et al, 한국과학기술원, 1998 |
37 | 육면체 형태의 모서리 기반 완화 유한요소에 관한 연구 = A study on edge-based smoothed finite elements of hexahedral shapelink 김호범; Kim, Ho-Beom; et al, 한국과학기술원, 2014 |
38 | 일반 평면 변형하의 복합재료 계면 균열 해석 = Analysis for interfacial crack in a laminated composite strip under generalized plane deformationlink 전인수; Jeon, In-Su; et al, 한국과학기술원, 1995 |
39 | 작은 탄성 변형률 하의 고정-자유 지지된 스트립과 보의 변형 = Deformations of cantilever strips and beams with small elastic strainslink 호광수; Ho, Kwang-Soo; et al, 한국과학기술원, 1989 |
40 | 점소성 재료에 대한 동적 유한요소 해석 = Dynamic finite element analysis for viscoplastic materialslink 김종훈; Kim, Jong-Hoon; et al, 한국과학기술원, 1992 |
41 | 직교이방성 복합적층판 단면에서 계면과 경사진 균열의 해석 = Analysis of slant cracks on the cross section of orthotropic composite laminatelink 변창식; Byean, Chang-Sik; 임세영; 이정주; et al, 한국과학기술원, 1995 |
42 | 트럭 샤시 시스템의 동적 Rig 시험 해석 = Analysis of a dynamic Rig test model for truck chassis systemslink 임재혁; Lim, Jae Hyuk; et al, 한국과학기술원, 2002 |
43 | 평면 또는 축대칭 변형에 있어서 소성스핀을 수반하는 탄소성 구성방정식 모델에 대한 연구 = A study on an elasto-plastic constitutive modelling with plastic spin in plane or axisymmetric deformationslink 이행수; Lee, Haeng-Soo; et al, 한국과학기술원, 1990 |
44 | 핵연료 집합체 지지격자의 좌굴거동에 대한 비선형 유한요소해석 = Finite element analysis of nonlinear buckling behavior of spacer grids in nuclear fuel assemblylink 최강혁; Choi, Kang-Hyouk; et al, 한국과학기술원, 2000 |
45 | 효과적인 Frontal 해법을 갖는 FEM Code의 설계 = Design of a finite element code with an efficient frontal solverlink 이석규; Lee, Seok-Gyu; et al, 한국과학기술원, 1997 |