Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1761 to 1780 of 3882

1761
단일과대하중하의 표면 피로 균열의 진전거동에 관한 연구 = Surface crack growth behavior under single overloadinglink

강수향; Kang, Su-Hiang; et al, 한국과학기술원, 1994

1762
단일통로 복강경 수술도구의 힘 증대를 위한 크랭크-슬라이더 팔꿈치 관절 = Force enhanced crank-slider elbow joint for single incision laparoscopic surgery instrumentlink

임준기; Lim, June gi; et al, 한국과학기술원, 2016

1763
단일통로 복강경 수술을 위한 로봇 암 간의 충돌을 줄인 소형화 된 수술로봇 시스템 = A collision reduced compact surgical robot system for Single Port Laparoscopylink

이제한; Lee, Jei-Han; et al, 한국과학기술원, 2014

1764
단층 재구성 기법을 이용한 비축대칭 확산/부분예혼합 화염의 구조 연구 = A study on non-axisymmetric diffusion/partially-premixed flame structure using computed tomographylink

양인영; Yang, In-Young; et al, 한국과학기술원, 1999

1765
달리기 성능을 향상시키는 마라톤화 Shoe sole의 최적 설계 = Optimal design of mechanical properties of marathon shoe sole to enhance running performancelink

김재환; Kim, Jae-Hwan; et al, 한국과학기술원, 1987

1766
달리기용 운동화 개선을 위한 연구 = A study on the improvement of running shoeslink

송인섭; Song, In-Seob; et al, 한국과학기술원, 1988

1767
대공사격통제장치 = Anti-aircraft fire control computing systemlink

김종철; Kim, Jong-Chul; et al, 한국과학기술원, 1979

1768
대기압 근처에서의 물-오일유화 연료 액적의 연소 특성에 관한 연구 = A study on the combustion characteristics of water in oil emulation fuel droplet in atmospheric pressurelink

노석홍; No, Suk-Hong; et al, 한국과학기술원, 1983

1769
대기압 플라즈마 제트 토치의 설계에 관한 연구 = A study on design of atmospheric pressure plasma jet torchlink

안준수; Ahn, Jun-su; et al, 한국과학기술원, 2007

1770
대면적 금속지지체형 고체 산화물 연료전지의 제작을 위한 열기계적 특성화 = Thermomechanical characterization of metal-supported solid oxide fuel cell for manufacturing scalabilitylink

송형훈; 배중면; et al, 한국과학기술원, 2022

1771
대변위 동력학 수식화와 Hertz 접촉 이론 모델에 근거한 보와 구의 저속도 충돌 해석 = A simulation of beam-sphere impact based on hertzian contact model combined with a large displacement dynamic equation formulationlink

이대일; Lee, Dae-Ill; 이병채; 곽병만; et al, 한국과학기술원, 1989

1772
대변위를 고려한 2차원 탄소성 프레임의 좌굴후 해석을 위한 프로그램 개발 = A program development for post buckling analysis of two dimensional elasto-plastic frames under large displacementlink

구정서; Koo, Jeong-Seo; et al, 한국과학기술원, 1987

1773
대변형, 대변위를 고려한 탄소성 유한요소 해석 = A study of elasto-plastic finite element analysis considering large displacement and large strainlink

이석순; Lee, Seok-Soon; et al, 한국과학기술원, 1984

1774
대퇴의족 성능평가를 위한 시뮬레이터 설계 = Design of simulator for test of above-knee prosthesis perfoemance testlink

송호진; Song, Ho-Jin; et al, 한국과학기술원, 1998

1775
대표적 국산 소형 승용차 엔진의 성능 및 배기가스 성분 측정장치 개발 및 실험 = Auto engine experiment and measuring system development for engine performance and exhaust gas composition of a representative, domastic compact passenger car enginelink

정영교; Chung, Young-Kyo; et al, 한국과학기술원, 1985

1776
대향류 화염의 비정상 거동에 대한 연구 = Unsteady behavior of counterflow flamelink

이기호; Lee, Ki-Ho; et al, 한국과학기술원, 2003

1777
대향류 확산 화염의 구조에 관한 수치적 연구 : 혼합 연료와 변형률의 영향 = A numerical study of the structure of the counterflow diffusion flame : mixed fuel flame and influence of strain rate variationlink

남창호; Nam, Chang-Ho; et al, 한국과학기술원, 1997

1778
대형 디젤 엔진에서 분사기형상이 HCCI 연소 및 배기 배출물에 미치는 영향 = Effect of the injector configuration on the HCCI combustion and exhaust emissions in a heavy duty diesel enginelink

이정우; Lee, Jung-Woo; et al, 한국과학기술원, 2010

1779
대형 발사장치의 수평 제어에 관한 연구 = A study on the level control of large launcherlink

홍길호; Hong, Kil-Ho; et al, 한국과학기술원, 1994

1780
대형 압축착화 엔진에서 JP-8/CNG 이종연료 예혼합압축착화 연소를 통한 입자상 물질 저감 = Reduction of particulate matter using JP-8/CNG dual-fuel premixed charge compression ignition combustion in a heavy-duty compression ignition enginelink

나용현; 배충식; et al, 한국과학기술원, 2020

rss_1.0 rss_2.0 atom_1.0