Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3861 to 3880 of 3899

3861
횡방향 주사를 이용한 광위상 간섭계의 페이즈 언래핑 향상에 대한 연구 = Phase unwrapping enhancement of phase shift interferometry by using lateral scanninglink

박도민; Park, Do-Min; et al, 한국과학기술원, 1998

3862
횡형압력용기의 치수 및 용접설계를 위한 전문가시스템의 개발에 관한 연구 = A study on development of expert system for dimension and weld designs of horizontal-typed pressure vessellink

서철웅; Seo, Chul-Woong; et al, 한국과학기술원, 1992

3863
효과적인 Frontal 해법을 갖는 FEM Code의 설계 = Design of a finite element code with an efficient frontal solverlink

이석규; Lee, Seok-Gyu; et al, 한국과학기술원, 1997

3864
효과적인 구조물 동특성 변경에 의한 진동파워 전달 저감에 관한 연구 = A study on vibrational input power reduction using effective structural dynamic modificationlink

선정욱; Sun, Jung-Woog; et al, 한국과학기술원, 1999

3865
효과적인 동특성 변경을 위한 구조물 보강 위치 선정법 = Structure reinforcement point selection for an efficient dynamic characteristics modificationlink

나욱진; Na, Wook-Jin; et al, 한국과학기술원, 1997

3866
효율적 모우드시험을 위한 가진점과 응답측정점의 결정 = Determination of excitation and response measurment points for effective modal testinglink

박종필; Park, Jong-Pill; et al, 한국과학기술원, 1992

3867
효율적 수중 추진을 위한 파동형 구동 메커니즘 개발 = Development of undulatory actuation mechanism for effective underwater propulsionlink

배문선; Bae, Mun-Seon; et al, 한국과학기술원, 2012

3868
효율적 정전기장 계산을 통한 MEMS구조물 해석에 대한 연구 = A study on the effective computational algorithm for electrostatic field for the analysis of MEMS structurelink

안재열; Ahn, Jae-Yul; et al, 한국과학기술원, 2002

3869
효율적인 신뢰도 해석을 위한 선택적 이변량 차원감소법에 대한 연구 = (A) study on selective bivariate dimension reduction method for efficient reliability analysislink

박정우; 이익진; et al, 한국과학기술원, 2018

3870
후래시 현상을 수반하는 수직증발관내에서의 유동양식 구분에 관한 연구 = Study of flow patterns inside the vertical tube evaporator with flash phenomenonlink

송시홍; Song, Si-Hong; et al, 한국과학기술원, 1987

3871
후륜 조향과 미끄럼 조향 시스템을 가진 세 바퀴 자동차의 조종 안정성 및 전복 안정성 제어 = Handling and rollover control of a three-wheeled vehicle with rear-wheel steering and skid steering systemlink

이준영; Lee, Joon-Young; 박영진; Park, Young-Jin; et al, 한국과학기술원, 2013

3872
후방 계단 하류의 난류 재순환 유동장에 관한 수치적 해석 = Numerical analysis of turbulent recirculation flow downstream of the rearward facing steplink

조만순; Cho, Man-Soon; et al, 한국과학기술원, 1992

3873
후방 압출공정의 해석 = Analysis of backward-extrusion processlink

김종규; Kim, Jong-Kyou; et al, 한국과학기술원, 1977

3874
후방 압출을 이용한 마찰 조건 측정 = Measurement of friction condition using backward extrusionlink

강성훈; Kang, Seong-Hoon; et al, 한국과학기술원, 2001

3875
후보경로 최적화를 통한 지역경로계획 알고리즘 = Local path planning algorithm based on candidate trajectory optimizationlink

김지철; Kim, Ji-Chul; et al, 한국과학기술원, 2009

3876
후판 SAW 입열량이 CTOD 시편의 잔류응력에 미치는 영향에 관한 연구 = A study on the influence of SAW heat input on residual stress of CTOD specimen for thick steel platelink

최대곤; Choi, Dae-Gon; et al, 한국과학기술원, 2012

3877
후향계단 난류 박리재부착 유동에서의 대형와의 구조 = Large-scale vortical structure in separated and reattaching flow over a turbulent backward-facing steplink

안승광; Ahn, Seung-Kwang; et al, 한국과학기술원, 2002

3878
훌라이휠 씨스템을 위한 자기베어링에 관한 연구 = Research toward magnetic bearing for flywheel systemlink

이응선; Lee, Eung-Sun; et al, 한국과학기술원, 1981

3879
훠지 학습제어기를 이용한 하이드로 포밍공정의 압력제어기 설계 = A fuzzy based pressure tracking controller design for hydroforming precesslink

김문종; Kim, Moon-Jong; et al, 한국과학기술원, 1991

3880
휴대용 연료전지를 위한 메탄올 개질에 관한 연구 = Study on methanol reforming for portable fuel celllink

이태희; Lee, Tae-Hee; et al, 한국과학기술원, 2006

rss_1.0 rss_2.0 atom_1.0