Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1821 to 1840 of 3969

1821
단일 관성센서 데이터와 인공신경망을 이용한 상지반복 회전운동에서 손목 관절 위치 예측 = Prediction of wrist position using the data set from single inertial sensor and artificial neural networks in upper limb repetitive rotational motionlink

이기범; 김정; et al, 한국과학기술원, 2022

1822
단일 모우드 근사에 의한 동흡진기 설계 = Design of dynamic vibration absorber by single mode approximationlink

류인준; Ryu, In-Jun; et al, 한국과학기술원, 1989

1823
단일 비젼을 이용한 AUV 도킹시스템의 구현에 관한 연구 = A study on the development of docking system for AUV using mono visionlink

홍영화; Hong, Young-Hwa; et al, 한국과학기술원, 2003

1824
단일 서보를 이용한 정밀 직선 구동 시스템의 설계와 제어에 관한 연구 = Design and control of one servo type precision positioning systemlink

김용상; Kim, Yong-Sang; et al, 한국과학기술원, 1999

1825
단일 와환 확산 화염에 관한 실험적 연구 = An experimental study on the single vortex ring diffusion flamelink

이대근; Lee, Dae-Keun; et al, 한국과학기술원, 1998

1826
단일 캠 구동기구의 동 안정성 해석 = Dynamic stability of a single cam drive mechanismlink

김홍배; Kim, Hong-Bae; et al, 한국과학기술원, 1989

1827
단일과대하중하의 표면 피로 균열의 진전거동에 관한 연구 = Surface crack growth behavior under single overloadinglink

강수향; Kang, Su-Hiang; et al, 한국과학기술원, 1994

1828
단일통로 복강경 수술도구의 힘 증대를 위한 크랭크-슬라이더 팔꿈치 관절 = Force enhanced crank-slider elbow joint for single incision laparoscopic surgery instrumentlink

임준기; Lim, June gi; et al, 한국과학기술원, 2016

1829
단일통로 복강경 수술을 위한 로봇 암 간의 충돌을 줄인 소형화 된 수술로봇 시스템 = A collision reduced compact surgical robot system for Single Port Laparoscopylink

이제한; Lee, Jei-Han; et al, 한국과학기술원, 2014

1830
단층 재구성 기법을 이용한 비축대칭 확산/부분예혼합 화염의 구조 연구 = A study on non-axisymmetric diffusion/partially-premixed flame structure using computed tomographylink

양인영; Yang, In-Young; et al, 한국과학기술원, 1999

1831
달리기 성능을 향상시키는 마라톤화 Shoe sole의 최적 설계 = Optimal design of mechanical properties of marathon shoe sole to enhance running performancelink

김재환; Kim, Jae-Hwan; et al, 한국과학기술원, 1987

1832
달리기용 운동화 개선을 위한 연구 = A study on the improvement of running shoeslink

송인섭; Song, In-Seob; et al, 한국과학기술원, 1988

1833
대공사격통제장치 = Anti-aircraft fire control computing systemlink

김종철; Kim, Jong-Chul; et al, 한국과학기술원, 1979

1834
대기압 근처에서의 물-오일유화 연료 액적의 연소 특성에 관한 연구 = A study on the combustion characteristics of water in oil emulation fuel droplet in atmospheric pressurelink

노석홍; No, Suk-Hong; et al, 한국과학기술원, 1983

1835
대기압 플라즈마 제트 토치의 설계에 관한 연구 = A study on design of atmospheric pressure plasma jet torchlink

안준수; Ahn, Jun-su; et al, 한국과학기술원, 2007

1836
대면적 금속지지체형 고체 산화물 연료전지의 제작을 위한 열기계적 특성화 = Thermomechanical characterization of metal-supported solid oxide fuel cell for manufacturing scalabilitylink

송형훈; 배중면; et al, 한국과학기술원, 2022

1837
대변위 동력학 수식화와 Hertz 접촉 이론 모델에 근거한 보와 구의 저속도 충돌 해석 = A simulation of beam-sphere impact based on hertzian contact model combined with a large displacement dynamic equation formulationlink

이대일; Lee, Dae-Ill; 이병채; 곽병만; et al, 한국과학기술원, 1989

1838
대변위를 고려한 2차원 탄소성 프레임의 좌굴후 해석을 위한 프로그램 개발 = A program development for post buckling analysis of two dimensional elasto-plastic frames under large displacementlink

구정서; Koo, Jeong-Seo; et al, 한국과학기술원, 1987

1839
대변형, 대변위를 고려한 탄소성 유한요소 해석 = A study of elasto-plastic finite element analysis considering large displacement and large strainlink

이석순; Lee, Seok-Soon; et al, 한국과학기술원, 1984

1840
대퇴의족 성능평가를 위한 시뮬레이터 설계 = Design of simulator for test of above-knee prosthesis perfoemance testlink

송호진; Song, Ho-Jin; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0