Browse "AE-Theses_Master(석사논문)" by Type Thesis(Master)

Showing results 581 to 600 of 948

581
복사효과를 고려한 수소/공기/불활성입자 혼합물에서의 화염전파에 대한 연구 = A study on flame propagation through a mixture of Hydrogen/air and inert particles with radiation effectlink

김덕연; Kim, Deok-Yeon; et al, 한국과학기술원, 1999

582
복수 이해관계자 관점을 고려한 vehicle routing problem의 파레토 프론트 생성 = Pareto front generation for the vehicle routing problem with vector profitslink

고재열; 안재명; et al, 한국과학기술원, 2018

583
복잡한 구조에서 레이저 훈련 기반 음향방출 위치표정 및 손상 누적 가시화 = Acoustic emission localization and damage accumulation visualization in complex structures based on laser elastic wave traininglink

정병학; 이정률; et al, 한국과학기술원, 2019

584
복합재 구조에 삽입된 광섬유 센서의 개선된 ingress/egress 기법 개발 = Improved ingress/egress methods for optical fibers embedded in the composite structureslink

박상오; Park, Sang-Oh; et al, 한국과학기술원, 2005

585
복합재료 날개의 진동특성 = Vibration characteristics of composite winglink

조덕형; Cho, Deok-Hyung; et al, 한국과학기술원, 1989

586
복합재료 날개의 하중 재분포 및 조종면 리버설 특성에 대한 정적 공탄성 해석 = Static aeroelastic analysis for load redistribution and control surface reversal of composite winglink

김은석; Kim, Eun-Seok; et al, 한국과학기술원, 1990

587
복합재료 로우터 블레이드에 대한 공력탄성학적 최적설계 = Aeroelastic optimum design for composite rotor bladeslink

권혁준; Kwon, Hyuk-Jun; et al, 한국과학기술원, 2000

588
복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink

김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003

589
복합재료 면재를 갖는 샌드위치 평판의 최적화 = Optimization of a sandwich plate with composite faceslink

권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1989

590
복합재료 무베어링 로우터 시스템의 정지 비행시 공탄성 해석 = Aeroelastic analysis of composite bearingless rotors in hoverlink

임인규; Lim, In-Gyu; et al, 한국과학기술원, 2004

591
복합재료 파손모드에 따른 광섬유 센서의 신호특성에 관한 연구 = Signal characteristics of a fiber optic sensor for failure modes of composite laminateslink

김대현; Kim, Dae-Hyun; et al, 한국과학기술원, 1999

592
복합재료 평판의 초음속 플러터 해석 = Flutter analysis of composite panels in supersonic flowlink

조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1990

593
복합재료 헬리콥터 블레이드의 동적 특성 = Dynamic characteristics of a composite helicopter rotor bladelink

차호철; Cha, Ho-Chul; et al, 한국과학기술원, 1989

594
복합재료의 전자기파 반사특성을 고려한 구조물 설계 및 해석 = Design and analysis of radar absorbing structure considering electromagnetic wave reflection properties of composite platelink

송운형; Song, Woon-Hyoung; et al, 한국과학기술원, 2000

595
복합재료의 혼합모우드 층간파괴인성치의 실험적 평가 = Evaluation of mixed mode interlaminar fracture toughness of graphite/epoxy composite materialslink

김형준; Kim, Hyong-Jun; et al, 한국과학기술원, 1989

596
복합적층판의 저속 충격거동에 대한 비선형 해석 = Nonlinear analysis of composite laminates subjected to low-velocity impactlink

최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1989

597
부분 선형 근사 기법을 이용한 정적 무장 할당 연구 = Piecewise-linear approximation method for static weapon-target assignmentlink

신인선; Shin, In Seon; et al, 한국과학기술원, 2016

598
부스팅 노즐에 의한 초음속 캐비티 압력 변화에 관한 연구 = Effect of boosting nozzle on the pressure of supersonic cavitylink

김형준; Kim, Hyung-Jun; et al, 한국과학기술원, 2003

599
분산형 다중 레이다 융합 시스템을 위한 추적 관리 구조 선정 = Track management architecture for distributed multiple radar fusion systemlink

이우철; 최한림; et al, 한국과학기술원, 2017

600
비디오스코프 및 회선신경망 기반 엔진 고압 압축기 블레이드 손상의 현장 진단 연구 = Study on in-field diagnosis of blades in high pressure compressor of engine based on videoscope and convolutional neural networkslink

김용호; 이정률; et al, 한국과학기술원, 2018

rss_1.0 rss_2.0 atom_1.0