1361 | (A) study for the solvability of Fiver by a linear algebraic approach = 선형 대수적 접근을 통한 Fiver의 해법 연구link Kim, Sun-Hae; 김선해; et al, 한국과학기술원, 2007 |
1362 | Heuristics for minimizing makespan on parallel dedicated machines with family setups = 셋업이 있는 병렬 전용 기계 공정에서의 최대 종료 시간을 최소화 하는 스케쥴링 알고리듬 개발link Kim, Kyoung-Yeon; 김경연; et al, 한국과학기술원, 2007 |
1363 | Optimal location of overwork-allowed facilities subject to choice of various equipment modes = 추가 작업이 허용된 시설의 최적입지 선정 및 각 시설의 장비용량 선정link Kwon, Min-Kyu; 권민규; et al, 한국과학기술원, 2007 |
1364 | Analysis of the discrete-time GI/Geo/1/ queue with single geometric vacation = 이산시간 대기행렬 GI/Geo/1/SGV 모형의 분석link Lee, Su-Hyun; 이수현; et al, 한국과학기술원, 2006 |
1365 | u-Card : means of delivering ubiquitous services to the residents in the u-city = u-City 환경 내에 유비퀴터스 서비스 제공을 위한 u-Card에 대한 연구link Suh, Jung-Won; 서정원; et al, 한국과학기술원, 2006 |
1366 | (A) multicast tree to minimize maximum delay in dynamic overlay network = 동적인 오버레이 네트워크에서 최대 지연을 최소화 하기 위한 멀티캐스트 트리link Baek, Jin-Woo; 백진우; et al, 한국과학기술원, 2006 |
1367 | (An) algorithm for the sensor location problem on grid networks = 격자 네트워크상에서의 센서 위치선정 문제에 관한 해법link Kim, Hee-Seon; 김희선; et al, 한국과학기술원, 2006 |
1368 | (An) efficient network anomaly detection method based on unsupervised learning = 비교사 학습을 이용한 효율적인 네트워크 이상 탐지 기법에 관한 연구link Kim, Eun-Hye; 김은혜; et al, 한국과학기술원, 2006 |
1369 | 근골격계질환 예방을 위한 마우스 작업의 손목지지대 개선 = The improvement of the wrist support for preventing the musculoskeletal disorderslink 김효준; Kim, Hyo-Jun; et al, 한국과학기술원, 2006 |
1370 | Minimizing total tardiness in a two parallel batch-and-single machines system with incompatible job families = 두 대로 구성된 병렬 (뱃치, 단독) 시스템에서 Incompatible job 패밀리에 대한 total tardiness 대상의 스케줄링 연구link Tang, Chonglin; 당숭린; Tang, C. Lin; et al, 한국과학기술원, 2006 |
1371 | (An) optimal EPQ policy for the production system with rework = 수선가능 제품의 경제적 생산량 (EPQ)에 관한 연구link Liu, Ning; 류영; et al, 한국과학기술원, 2006 |
1372 | (An) Optimization algorithm for the advertisement scheduling problem on broadcast television = 텔레비전 광고 스케줄링 문제의 최적화 해법link Lee, Ji-Won; 이지원; et al, 한국과학기술원, 2006 |
1373 | CPC환경을 위한 베이지안 네트워크를 이용한 온톨로지 기반 의미 매핑 접근법 = Ontology-based semantic mapping approach using a bayesian network for communication in CPC environmentlink 이민정; Lee, Min-Jung; et al, 한국과학기술원, 2006 |
1374 | QEM 방법을 이용한 다각형 모델에의 점진적 메쉬 적용 = Progressive mesh construction for polygonal models using QEMlink 김상무; Kim, Sang-Mu; et al, 한국과학기술원, 2006 |
1375 | (A) simulated annealing algorithm for the capacitated lot-sizing and scheduling problem under sequence-dependent setup costs and setup times = 순서에 종속된 준비 시간과 준비 비용을 고려한 로트사이징 문제의 시뮬레이티드 어닐링 해법link Jung, Ji-Young; 정지영; et al, 한국과학기술원, 2006 |
1376 | VDT 작업에서의 근골격계 질환 예방을 위한 새로운 팔 지지대 제안 = Suggestion of the movable armrest for preventing the musculoskeletal disorderslink 홍기범; Hong, Gi-Beom; et al, 한국과학기술원, 2006 |
1377 | Capacity analysis of crossed slot in TD-CDMA\TDD System = TD-CDMA\TDD 통신 시스템에서 Crossed slot 의 성능 분석link Yim, Kwang-Hyuk; 임광혁; et al, 한국과학기술원, 2006 |
1378 | Production and delivery scheduling with transportation mode selection allowed = 수송수단의 선택이 허용된 생산 및 배송 스케줄링에 관한 연구link Cho, Jung-Keun; 조정근; et al, 한국과학기술원, 2006 |
1379 | HLA 기반의 MRM 시뮬레이션의 성능분석에 관한 연구 = A study on performance analysis of HLA-based MRM simulationlink 한원규; Han, Won-Kyu; et al, 한국과학기술원, 2006 |
1380 | (A) busy period analysis for the M/M/c/K queueing system = M/M/c/K 대기행렬 시스템의 바쁜 기간 분석link Lim, Dae-Eun; 임대은; et al, 한국과학기술원, 2006 |