ME-Theses_Ph.D.(박사논문)

Recent Items

Collection's Items (Sorted by Submit Date in Descending order): 1781 to 1800 of 1973

1781
압전형 초음파 변환자의 제작 및 성능해석 = Fabrication and performance analysis of piezoelectric ultrasonic transducerslink

이종현; Lh, Jong-Hyun; et al, 한국과학기술원, 1986

1782
축대칭 물체의 3차원 접촉응력 해석 = A three dimensional contact stress analysis of axisymmetric bodieslink

박상규; Park, Sang-Gyu; et al, 한국과학기술원, 1986

1783
Unsteady turbulent thermal diffusion of two-dimensional surface discharge of heated water into a rectangular reservoir = 2次元 表面 溫排水의 非正常 亂流熱擴散에 관한 硏究link

Lee, Sang-Joon; 이상준; et al, 한국과학기술원, 1986

1784
Prediction of phase change front and study on the solidification of liquid using the optimization technique = 最適化 技法을 利用한 相變化 境界의 推定 및 流體의 凝固에 關한 硏究link

Choi, Heon-Oh; 최헌오; et al, 한국과학기술원, 1986

1785
비균질성 석출물의 탄성장과 상호작용에너지 = Elastic field and interaction energy of inhomogeneous precipitateslink

최병익; Choi, Byung-Ik; et al, 한국과학기술원, 1985

1786
평면기구의 회전연결부에서의 간극효과를 고려한동적해석 및 설계 = Dynamic analysis and design of planar mechanisms with clearances at revolute jointslink

신재균; Shin, Jae-Kyun; et al, 한국과학기술원, 1985

1787
Automatic modal balancing of flexible rotors during operation by using a single balancing head = 단일면 밸런싱 장치를 이용한 탄성회전체의 운전중 자동 모우드 밸런싱link

Kim, Young-Dae; 김영대; et al, 한국과학기술원, 1985

1788
Graphite/Epoxy Angle-Ply 복합 적층판의 층간균열성장에 관한 해석 = Anlysis of delamination crack growth in graphite/epoxy angle-ply laminated compositelink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1985

1789
비정상 온도분포로 인한 대류발생에 관한 연구 = Onset of convection from time-depent temperature profilelink

김경훈; Kim, Kyoung-Hoon; et al, 한국과학기술원, 1985

1790
Laminar natural convection heat transfer about a heated horizontal cylinder having an attached or separated plume = 附着 혹은 剝離된 熱上昇流를 갖는 加熱된 水平실린더 주위의 層流 自然對流link

Cho, Chul-Hyung; 조철형; et al, 한국과학기술원, 1985

1791
Performance analysis of reactive silencers withconsideration of the effects of higher order acoustic modes = 반사형 소음기에 있어서 고차 모드 음파의 영향을 고려한 성능 해석link

Ih, Jeung-Guon; 이정권; et al, 한국과학기술원, 1985

1792
부력의 영향을 받는 수평경계층 유동에 대한 4-방정식 난류모델의 해석 = Four-equation turbulence model for prediction of the turbulent boundary layer affected by buoyancy force over a flat plate ;link

성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 1984

1793
탄소성 접촉 문제의 해석 및 응용 = Analysisand applucatiins of the elastoplastic contact problemslink

이병채; Lee, Byung-Chai; et al, 한국과학기술원, 1984

1794
연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink

김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983

1795
Hydrofilm extrusion through optimized curved dies = 최적곡면금형을 통한 박막식 정수압 압출link

Cho, Nam-Seon; 조남선; et al, 한국과학기술원, 1983

1796
(A) dislocation theory of semi-brittle fracture = 반취성 파괴 이론link

Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1981

1797
선삭가공의 적응제어에 관한 연구 = A study on the adaptive control system for turning processlink

허주; Hoh, Joo; et al, 한국과학기술원, 1980

1798
전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink

송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980

1799
초정밀 회전 오차 보상형 공기 베어링 스테이지의 설계 및 오차 보정에 관한 연구 = Design and error calibration of precision air bearing stage with yaw error compensationlink

김경천; Kim, Kyoung-Chon; et al, 한국과학기술원, 2011

1800
Study on performance of $n-C_4H_10-driven$ solid oxide fuel cell = 부탄 가스 기반 고체산화물 연료전지의 성능 향상에 관한 연구link

Bae, Gyu-Jong; 배규종; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0