Browse "ME-Theses_Ph.D.(박사논문) " by Author Kim, Kwang-Joon

Showing results 1 to 30 of 30

1
Cutting process modeling and adaptive force control of the turning process = 선반작업에서의 절삭과정 모형화와 절삭력 적응제어link

Hwang, Hong-Yeon; 황홍연; et al, 한국과학기술원, 1988

2
Finite element model updating using multiobjective optimization technique = 다목적 최적화 기법을 이용한 유한요소모델 개선link

Kim, Gyeong-Ho; 김경호; Park, Youn-Sik; Kim, Kwang-Joon; et al, 한국과학기술원, 2003

3
Linear and nonlinear ARMAX modeling approach in nonlinearity identification = 선형 및 비선형 ARMAX 모형화를 이용한 비선형성 규명link

Jang, Han-Kee; 장한기; et al, 한국과학기술원, 1994

4
MISO 모형을 이용한 소음 / 진동원 규명법과 우선순위 결정에 관한 연구 = Source identification using MISO model and determination of the priority among correlated inputslink

박정석; Park, Jung-Seok; et al, 한국과학기술원, 1992

5
Model analysis of multi-input/multi-output systemby vector ARMAX time series modeling = 벡터 ARMAX 시계열 모델링에 의한 다입력/다출력계의 모우드해석link

Park, Byeong-Ho; 박병호; et al, 한국과학기술원, 1989

6
Modeling of dual-chamber pneumatic spring and application to transmissibility design of vibration isolation table = 이중챔버형 공압스프링의 모형화 및 제진대 전달률 설계에의 응용link

Lee, Jeung-Hoon; 이정훈; et al, 한국과학기술원, 2007

7
Performance enhancement of pneumatic vibration isolation tables in low frequency range by time delay control = 시간지연 제어기법을 이용한 저주파 영역에서의 공압제진대의 성능 개선link

Shin, Yun-Ho; 신윤호; et al, 한국과학기술원, 2009

8
Seismic response of submerged internal systems in base-isolated structures = 지진절연 건물내 수중구조물의 응답특성link

Shin, Tae-Myung; 신태명; et al, 한국과학기술원, 1997

9
관내 유동 및 고음압을 고려한 공명기와 그 배열 연구 = A study on resonators at high sound pressure and grazing flow in duct and their arrangementslink

서상현; Seo, Sang-Hyeon; 김광준; Kim, Kwang-Joon; et al, 한국과학기술원, 2017

10
다입력-단일출력계 모형을 이용한 소음/진동원 규명에 관한 연구 = Source identification methods by multiple-input/single output modelinglink

배병국; Bae, Byung-Kook; et al, 한국과학기술원, 1998

11
링크 및 차체 위 진동신호를 이용한 주행 차량의 서스펜션 연결부 부싱에서의 전달력 규명에 관한 연구 = A study on indirect identification of transmission forces through rubber bushing in vehicle suspension system under driving condition by using vibration signals measured on link and car bodylink

채창국; Chae, Chang-Kook; et al, 한국과학기술원, 2001

12
모드모형방법에 의한 간접적 입력규명 = Indirect input identification by modal model techniquelink

김영렬; Kim, Yeong-Ryeol; et al, 한국과학기술원, 1998

13
벡타형 4단 정수법을 이용한 다중 입출력 기계계의 해석 = Analysis of the MIMO mechanical system using the vectorial four pole parameter methodlink

하재용; Ha, Jae-Yong; et al, 한국과학기술원, 1994

14
복동형 유.공압 완충장치의 동적 특성 분석 및 헬기 지상공진에의 적용 = Analysis of double-stage oleo-pneumatic shock absorber and application to rotorcraft against ground resonancelink

이윤규; Lee, Yoon-Kyu; et al, 한국과학기술원, 2010

15
사각관내 고차모우드 소음의 능동 제어에 관한 연구 = Active control of the higher mode noise in rectangular ductslink

김인수; Kim, In-Soo; et al, 한국과학기술원, 1993

16
선형 이력 및 비선형 특성을 갖는 진동절연요소의 시간영역 매개변수 모형화 = Time domain parametric modeling of vibration isolation elements with linear hysteretic and nonlinear characteristicslink

김기선; Kim, Ki-Sun; et al, 한국과학기술원, 2012

17
압축 예하중을 받고 있는 점탄성 재료의 복소탄성계수 결정 = Determination of complex modulus of viscoelastic materials subject to compressive pre-loadinglink

이정학; Lee, Jeong-Hak; et al, 한국과학기술원, 2001

18
영구자석 매입형 BLDC 모터의 소음/진동 평가를 위한 전자기적 가진력의 특성화 = Characterization of electromagnetic excitation forces for interior permanent magnet type BLDC motors for noise/vibration assessmentlink

고홍석; Ko, Hong-Seok; et al, 한국과학기술원, 2003

19
유도전동기의 소음/진동 특성 분석 및 고정자와 회전자 사이에서의 분포된 전자기적 가진 입력의 간접적 추정 = Noise/vibration analysis of induction motors and indirect identification of distributed electromagnetic excitation forces between stator and rotorlink

조대현; Cho, Dae-Hyeon; et al, 한국과학기술원, 1998

20
전동형 진동식 압축기의 동적 해석 = Analysis of dynamics of electrodynamic oscillating compressorlink

최규상; Choe, Gyu-Sang; et al, 한국과학기술원, 2000

21
점탄성 재료의 복소탄성계수 추출 = Estimation of complex modulus for viscoelastic materialslink

안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1994

22
점탄성요소 지지경계조건을 갖는 보/평판 구조물의 진동해석 = Vibration analysis of beam and plate structures with viscoelastic boundary supportslink

강기호; Kang, Kee-Ho; et al, 한국과학기술원, 1996

23
점탄성재료의 복소영계수 및 유한요소법에의 응용을 위한 포아송비 추출방법 = A method to determine complex young's modulus and poisson's ratio of viscoelastic materials for FEM applicationslink

심송; Sim, Song; et al, 한국과학기술원, 1991

24
점탄성층의 수직 및 전단 변형율을 고려한 샌드위치 평판의 진동해석 = Effects of normal and shear strains in viscoelastic core material on modal properties of sandwich plateslink

이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1996

25
조준경 안정화장치의 마찰 특성 규명 및 성능 향상에의 응용 가능성에 대한 연구 = Friction identification of a sight stabilization system and feasibility study on its application to control performance improvementlink

강윤식; Kang, Youn-Sik; et al, 한국과학기술원, 1997

26
주성분 분석을 이용한 다입력 환경하에서의 간접적 입력규명 = Indirect input identification in multi-source environment via principal component analysislink

조문선; Cho, Mun-Son; et al, 한국과학기술원, 2000

27
주파수 의존 복소 강성 요소를 갖는 동역학계의 모드 해석 = Modal analysis of dynamic systems with elements of frequency-dependent complex stiffnesslink

이준화; Lee, Jun-Hwa; et al, 한국과학기술원, 2003

28
지반 가진 및 상부 수평질량이동 기인 관성력 가진에 대한 제진대의 6-자유도 능동 공압 진동제어 = 6-DOF active pneumatic control of vibration isolation table against ground and inertial force excitation induced by horizontally moving masslink

선종오; Sun, Jong-Oh; et al, 한국과학기술원, 2012

29
진동파워 접근법에 의한 다차원 진동절연계 성능 평가시의 회전 변형항과 실험 오차의 영향 = Effects of rotational vibration terms and experimental errors on performance assessment of multi-dimensional vibration isolation system by vibrational power flow approachlink

이호정; Lee, Ho-Jung; et al, 한국과학기술원, 2004

30
횡방향 진동을 이용한 벨트구동계의 정적 장력 및 동적 장력의 규명 = Identification of static and dynamic tension in belt driving systems using flexural vibrationslink

임완택; Rim, Wan-Teck; et al, 한국과학기술원, 1993

rss_1.0 rss_2.0 atom_1.0