Browse "ME-Theses_Ph.D.(박사논문) " by Author 김상수

Showing results 1 to 34 of 34

1
Aerosol particle deposition in the obstructed duct flow subjected to an electric field = 장애물이 설치된 덕트내 정전유동장에서의 에어로졸 입자 부착현상link

Suh, Yong-Jae; 서용재; et al, 한국과학기술원, 1996

2
Characteristics control of bioaerosol using thermal energy = 열에너지를 이용한 바이오에어로졸의 특성 제어link

Jung, Jae-Hee; 정재희; et al, 한국과학기술원, 2008

3
Effect of spray characteristics of slurry on the flue gas desulfurization efficiency in the spray drying absorber = 반건식 세정기에서 산성가스 제거효율에 대한 슬러리 분무특성의 영향link

Yang, Hyun-Mo; 양현모; et al, 한국과학기술원, 2000

4
Effect of turbulent diffusion on particle transport and collection efficiency in electrostatic precipitators with cavity walls = 캐비티 벽을 가지는 전기집진기에서 난류확산이 입자거동 및 집진효율에 미치는 영향link

Park, Seok-Joo; 박석주; et al, 한국과학기술원, 1999

5
Liquid-based optical waveguide and its application for particle manipulation = 액체 기반의 광도파관과 입자 분리로의 응용link

Lee, Kang-Soo; 이강수; et al, 한국과학기술원, 2013

6
Nd:YAG 레이저를 이용한 유리 기판상의 유기 오염물 레이저 세정 = Laser cleaning of organic contaminants on glass substrate using Nd:YAG laserlink

김진호; Kim, Jin-Ho; et al, 한국과학기술원, 2007

7
New type of impactor with varying impaction plate temperature for capturing particulate matters : including PM2.5 and bioaerosols = 충돌판 온도변화를 이용한 새로운 임팩터의 개발 및 연구 : PM2.5 및 바이오미세입자 포집에의 응용link

Lee, Byung-Uk; 이병욱; et al, 한국과학기술원, 2003

8
Numerical study of high particle mass loading effect on the impactor performance = 입자질량고부하가 임팩터성능에 미치는 영향에 관한 수치적 연구link

Her, Jae-Young; 허재영; et al, 한국과학기술원, 1991

9
Numerical study on thermophoresis of highly absorbing, emitting particles in laminar tube flow = 층류 원통 유동내의 고 흡수, 방사하는 입자의 열확산에 관한 수치적 연구link

Yoa, Suk-Jun; 여석준; et al, 한국과학기술원, 1990

10
Particle separation using radiation force = 광력을 이용한 입자 분리에 관한 연구link

Kim, Sang-Bok; 김상복; et al, 한국과학기술원, 2008

11
Particle transport and deposition from non-isothermal gas-particle flows = 비등온 기체-입자 유동에서 입자전달 및 부착현상에 관한 연구link

Kim, Yong-Jin; 김용진; et al, 한국과학기술원, 1991

12
Particle transport and deposition in high temperature gas-particle two-phase tube flow with thermal radiation = 고온 기체-입자 관유동에서 복사가 수반된 입자의 이동 및 부착현상link

Park, Sung-Ho; 박성호; et al, 한국과학기술원, 1993

13
Silver nanowire-based hybrid nanostructure for a flexible transparent conductor = 유연 투명전극을 위한 은 나노와이어 기반 하이브리드 나노구조체에 관한 연구link

Choi, Dong Yun; 최동윤; et al, 한국과학기술원, 2015

14
Trajectory analysis of nanoparticles under electrostatic/flow field and its application to measurements of electrical mobility = 전기장/유동장 내의 나노 입자 거동 해석 및 전기이동도 측정에의 응용link

Song, Dong-Keun; 송동근; et al, 한국과학기술원, 2005

15
내연기관 피스톤-링 결합체 마찰력 측정 시스템의 개발 및 마찰력 측정에 관한 연구 = A study on the development of piston-ring assembly friction force measuring system and its measurement in I.C. engineslink

윤정의; Yun, Jeong-Eui; et al, 한국과학기술원, 1993

16
높은 CO2 부분압 조건에서 CaCO3 흡착제 입자의 로 내 탈황 반응 특성 연구 및 반응 모델 개발 = Characteristic study and modeling of the in-furnace desulfurization of CaCO3 sorbent particles under high CO2 partial pressurelink

정성하; Jeong, Seongha; et al, 한국과학기술원, 2015

17
다중 홈 노즐을 이용한 고유량 정전분무 특성 연구 및 바이오에어로졸과 PLGA 입자 발생에의 응용 = Characteristics of high flow rate electrospray using multiplexed grooved nozzles and application to generation of bioaerosols and PLGA particleslink

김경태; Kim, Kyoung-Tae; et al, 한국과학기술원, 2008

18
대기압과 저압상태에서 액체의 유량과 물성치가 정전스프레이의 분무특성에 미치는 영향 = The effect of flow rate and physical properties of liquid on electrospraying at atmospheric and low pressureslink

구본기; Ku, Bon-Ki; et al, 한국과학기술원, 2001

19
모세관 팽창을 통한 입자의 응축 성장에 관한 연구 = Condensational growth of particles through expansion in a capillary tubelink

정해영; Jeong, Hae-Young; et al, 한국과학기술원, 2001

20
물의 정전분무에 관한 실험적 연구: 분무 불안정과 액적 분열 특성 = Experimental study on water electrospray: Characteristics of jet instability and droplet generationlink

박인용; Park, Inyong; et al, 한국과학기술원, 2015

21
비휘발성 물질을 포함한 액적의 증발현상에 관한 연구 = A study on evaporation phenomena of liquid droplet which contains nonvolatile impuritylink

김재훈; Kim, Jae-Hoon; et al, 한국과학기술원, 2007

22
사중극자 전기장을 이용한 나노입자 집속기술: 수치모사법 개발 및 실험적 검증 = Electrodynamic Focusing of Nanoparticles Using the Quadrupole Electric Field: Development of a Simulation Method and Experimental Verificationlink

최진영; Choi, Jin-Young; et al, 한국과학기술원, 2007

23
삼중 동축 노즐을 이용한 정전분무 특성 및 PLGA와 PDLLA를 이용한 다중-쉘 캡슐 제조 = Characteristics of electrospray using the triaxial nozzle system and multi-shell encapsulation by PLGA and PDLLAlink

김우진; Kim, Woo-Jin; et al, 한국과학기술원, 2011

24
수직원관내 파형 액막의 유동 및 흡수현상에 관한 연구 = Vapor absorption into wavy falling liquid film in a vertical circular tube absorberlink

길성호; Kil, Seong-Ho; et al, 한국과학기술원, 2002

25
양코로나 방전을 수반하는 사각 관성충돌기에서의 정전 유동장과 입자부착 = Electrohydrodynamic flow and particle deposition in the rectangular impactor with positive corona dischargelink

정상현; Jeong, Sang-Hyeon; et al, 한국과학기술원, 1998

26
유한시간 사이클을 이용한 저온열 증기 동력기관의 이론적 최적화 = Finite-time optimizations of low-grade vapor power cycle heat engineslink

이원용; Lee, Won-Yong; et al, 한국과학기술원, 1991

27
응축 증발법을 이용한 은 입자의 균일 하전 특성 연구 = Characteristics of uniform charging of silver particles using the condensation and evaporation methodlink

최영주; Choi, Young-Joo; et al, 한국과학기술원, 2007

28
전기력이 응집체의 형상과 성장특성에 미치는 영향에 대한 연구 = The effect of electric force on morphology and growth of aggregatelink

박형호; Park, Hyung-Ho; et al, 한국과학기술원, 2002

29
전기적 분무 열분해를 이용한 나노 구조 물질 제조 = Synthesis of nanostructured materials using electrospray pyrolysislink

오현철; Oh, Hyun-Cheol; et al, 한국과학기술원, 2008

30
조합형 집진장치에서의 입자상 물질 및 가스상 수은 제거 특성 = PM and gaseous mercury removal characteristics in hybrid particulate collectorlink

최호경; Choi, Ho-Kyung; et al, 한국과학기술원, 2009

31
초음속 유동에서 미소입자생성 및 부착현상에 관한 연구 = Formation and deposition of submicron particles in supersonic flowlink

오재준; Oh, Jae-Joon; et al, 한국과학기술원, 1994

32
톱니 형상 슬릿 정전분무 노즐 개발과 투명 전극에의 응용에 관한 연구 = Development of saw-tooth type slit electrospray nozzle and its application to TCE coatinglink

김홍석; Kim, Hongseok; et al, 한국과학기술원, 2015

33
튜브내 비등온 유동에서 응축가능한 증기의 전달현상 = Transport of a condensable species in nonisothermal tube flowlink

김영각; Kim, Young-Kag; et al, 한국과학기술원, 1993

34
펄스 콘젯 모드를 이용한 전기수력학적 드랍온디맨드 패터닝 = Electrohydrodynamic drop-on-demand patterning in the pulsed cone-jet modelink

김중혁; Kim, Joong-Hyuk; et al, 한국과학기술원, 2008

rss_1.0 rss_2.0 atom_1.0